[U-Boot] [PATCH v2 3/6] video: fsl_dcu_fb: Enable pixel clock after initialization

[Sanchayan Maity]

From: Stefan Agner <stefan.agner at toradex.com>

When enabling the DCU and pixel clock, the test mode is activated
since this is the reset configuration. The test mode immediately
shows a red screen on a LCD. A moment later, the DCU gets
initialized properly.

This patch enables the pixel clock after initialization of the DCU
control register. This avoids this initial flicker on LCD screens.

While at it change the polarity of pixel clock to display samples
data on the rising edge.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
---
 drivers/video/fsl_dcu_fb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/video/fsl_dcu_fb.c b/drivers/video/fsl_dcu_fb.c
index 801bf3db95..a922a91fb2 100644
--- a/drivers/video/fsl_dcu_fb.c
+++ b/drivers/video/fsl_dcu_fb.c
@@ -41,7 +41,7 @@
 #define DCU_VSYN_PARA_BP(x)		((x) << 22)
 #define DCU_VSYN_PARA_PW(x)		((x) << 11)
 #define DCU_VSYN_PARA_FP(x)		(x)
-#define DCU_SYN_POL_INV_PXCK_FALL	(0 << 6)
+#define DCU_SYN_POL_INV_PXCK_FALL	(1 << 6)
 #define DCU_SYN_POL_NEG_REMAIN		(0 << 5)
 #define DCU_SYN_POL_INV_VS_LOW		(1 << 1)
 #define DCU_SYN_POL_INV_HS_LOW		(1)
@@ -191,8 +191,6 @@ static void reset_total_layers(void)
 		dcu_write32(&regs->ctrldescl[i][9], 0);
 		dcu_write32(&regs->ctrldescl[i][10], 0);
 	}
-
-	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
 }
 
 static int layer_ctrldesc_init(int index, u32 pixel_format)
@@ -246,8 +244,6 @@ static int layer_ctrldesc_init(int index, u32 pixel_format)
 	dcu_write32(&regs->ctrldescl[index][7], DCU_CTRLDESCLN_8_FG_FCOLOR(0));
 	dcu_write32(&regs->ctrldescl[index][8], DCU_CTRLDESCLN_9_BG_BCOLOR(0));
 
-	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
-
 	return 0;
 }
 
@@ -273,8 +269,6 @@ int fsl_dcu_init(unsigned int xres, unsigned int yres,
 	memset(info.screen_base, 0, info.screen_size);
 
 	reset_total_layers();
-	div = dcu_set_pixel_clock(info.var.pixclock);
-	dcu_write32(&regs->div_ratio, (div - 1));
 
 	dcu_write32(&regs->disp_size,
 		    DCU_DISP_SIZE_DELTA_Y(info.var.yres) |
@@ -313,6 +307,11 @@ int fsl_dcu_init(unsigned int xres, unsigned int yres,
 
 	layer_ctrldesc_init(0, pixel_format);
 
+	div = dcu_set_pixel_clock(info.var.pixclock);
+	dcu_write32(&regs->div_ratio, (div - 1));
+
+	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
+
 	return 0;
 }
 
-- 
2.12.1