[U-Boot] [PATCH 10/16] Move dram_init_banksize() to a common header

[Simon Glass]

This is an weak function present on all archs so we should have it in the
common header file. Remove it from arch-specific headers and add a
function comment.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/include/asm/u-boot-arm.h |  1 -
 arch/x86/include/asm/u-boot-x86.h |  1 -
 include/common.h                  | 17 +++++++++++++++++
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index 2129f37c8f..b931c22060 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -36,7 +36,6 @@ int	arch_early_init_r(void);
 
 /* board/.../... */
 int	board_init(void);
-int dram_init_banksize(void);
 void	board_quiesce_devices(void);
 
 /* cpu/.../interrupt.c */
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index 33c6e2bb68..d2d603967e 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -41,7 +41,6 @@ void x86_disable_caches(void);
 int x86_init_cache(void);
 void reset_cpu(ulong addr);
 ulong board_get_usable_ram_top(ulong total_size);
-int dram_init_banksize(void);
 int default_print_cpuinfo(void);
 
 /* Set up a UART which can be used with printch(), printhex8(), etc. */
diff --git a/include/common.h b/include/common.h
index 844f012297..1441581c40 100644
--- a/include/common.h
+++ b/include/common.h
@@ -206,6 +206,23 @@ typedef void (interrupt_handler_t)(void *);
  */
 int dram_init(void);
 
+/**
+ * dram_init_banksize() - Set up DRAM bank sizes
+ *
+ * This can be implemented by boards to set up the DRAM bank information in
+ * gd->bd->bi_dram(). It is called just before relocation, after dram_init()
+ * is called.
+ *
+ * If this is not provided, a default implementation will try to set up a
+ * single bank. It will do this if CONFIG_NR_DRAM_BANKS and
+ * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of
+ * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to
+ * get_effective_memsize().
+ *
+ * @return 0 if OK, -ve on error
+ */
+int dram_init_banksize(void);
+
 void	hang		(void) __attribute__ ((noreturn));
 
 int	timer_init(void);
-- 
2.12.2.564.g063fe858b8-goog