[U-Boot] [PATCH 0/20] tegra: Expand Nyan-big support

[Matthew Gorski]

Thanks for the reply Simon.

I have been trying to find the System.map for depthcharge to see the kernel
load address but I am unable to find anything.  I have tried multiple
CONFIG_SYS_TEXT_BASE
settings with no luck.

I am creating my sdcard with a standard linux (Linux for Tegra) rootfs:
Partition an SD card

sudo cgpt create <MMC BLOCK DEVICE>
sudo cgpt add -b 34 -s 32768 -P 1 -S 1 -t kernel <MMC BLOCK DEVICE> #
16 MB kernel image partition
sudo cgpt add -b 32802 -s <ROOT PARTITION SIZE in 512B sectors> -t
rootfs <MMC BLOCK DEVICE>

cgpt doesn't seem to create a protective MBR. If one is not already in
place, it can be created with:

sudo gdisk <MMC BLOCK DEVICE> # and enter command w

<https://github.com/chromeos-nvidia-androidtv/gnu-linux-on-acer-chromebook-13#copy-data-to-the-sd-card>Copy
data to the SD card

sudo dd if=./kernelpart.bin of=<MMC BLOCK DEVICE>p1
sudo mkfs.ext4 <MMC BLOCK DEVICE>p2
sudo mount <MMC BLOCK DEVICE>p2 /mnt/


On Mon, May 1, 2017 at 11:14 AM, Simon Glass <sjg at chromium.org> wrote:

> Hi Matthew,
>
> On 1 May 2017 at 08:43, Matthew Gorski <matt.gorski at gmail.com> wrote:
> > I am porting u-boot to nyan_big and need some input.  I have been
> searching
> > high and low and found this thread here: [U-Boot] [PATCH 0/20] tegra:
> Expand
> > Nyan-big support
> >
> >  https://lists.denx.de/pipermail/u-boot/2015-March/209530.html
> >
> > I have tried to build u-boot with the branch here:
> >
> > https://git.collabora.com/cgit/user/tomeu/u-boot.git/commit/?h=nyan-big
> >
> > and also the official chromium next branch
>
> Have you tried mainline U-Boot? It already supports nyan-big. I'm not
> sure about the situation with the downstream trees.
>
> >
> > I followed building instructions here:
> > https://www.chromium.org/chromium-os/firmware-porting-
> guide/using-nv-u-boot-on-the-samsung-arm-chromebook
> >
> > I build with these commands:
> >
> > mkimage -e 0x81000100 -a 0x81000100 -f kernel-big.its kernel-u-boot
> >
> > (with and without the load address setting)
> >
> > vbutil_kernel --arch arm --pack kernel.bin --keyblock
> > /usr/share/vboot/devkeys/kernel.keyblock --signprivate
> > /usr/share/vboot/devkeys/kernel_data_key.vbprivk --version 1 --config
> > dummy.txt --vmlinuz kernel-u-boot --bootloader dummy.txt
> >
> > I have had numerous failed attempts to boot uboot from sdcard mmcblk1p1
> >
> > Any help is appreciated I have only gotten a blank screen after weeks of
> > flashing.  I can boot custom v3.10 kernels so I assume I am using the
> > correct building procedure.  Thanks in advance for help from the u-boot
> > community.
>
> It is possible that it needs a particular address due to limitations
> in the FIT support on Nyan. I'm not sure what it is but might be able
> to take a look at some point.
>
> How are you building your SD card? Are you following some instructions
> from somewhere?
>
> Regards,
> Simon
>