[U-Boot] [PATCH v2 2/5] power: pmic: rk808: add RK818 support

Jacob Chen jacob-chen at iotwrt.com
Tue May 2 06:54:49 UTC 2017


The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
devices.

For boards use rk818, the input current should be set in the early stage, before
ddr initialization.

Signed-off-by: Jacob Chen <jacob-chen at iotwrt.com>
---

Changes in v2:
- remove input current selection in probe, it should be configured
in board_init_f by manual.

 drivers/power/pmic/rk808.c | 16 ++++++++++++++++
 include/power/rk808_pmic.h | 12 ++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/power/pmic/rk808.c b/drivers/power/pmic/rk808.c
index 3f5f316..582e456 100644
--- a/drivers/power/pmic/rk808.c
+++ b/drivers/power/pmic/rk808.c
@@ -80,6 +80,20 @@ static int rk808_bind(struct udevice *dev)
 }
 #endif
 
+static int rk808_probe(struct udevice *dev)
+{
+	struct rk808_priv *priv = dev_get_priv(dev);
+	uint8_t msb, lsb;
+
+	/* read Chip variant */
+	rk808_read(dev, ID_MSB, &msb, 1);
+	rk808_read(dev, ID_LSB, &lsb, 1);
+
+	priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
+
+	return 0;
+}
+
 static struct dm_pmic_ops rk808_ops = {
 	.reg_count = rk808_reg_count,
 	.read = rk808_read,
@@ -88,6 +102,7 @@ static struct dm_pmic_ops rk808_ops = {
 
 static const struct udevice_id rk808_ids[] = {
 	{ .compatible = "rockchip,rk808" },
+	{ .compatible = "rockchip,rk818" },
 	{ }
 };
 
@@ -98,5 +113,6 @@ U_BOOT_DRIVER(pmic_rk808) = {
 #if CONFIG_IS_ENABLED(PMIC_CHILDREN)
 	.bind = rk808_bind,
 #endif
+	.probe = rk808_probe,
 	.ops = &rk808_ops,
 };
diff --git a/include/power/rk808_pmic.h b/include/power/rk808_pmic.h
index d29c2b3..c370c32 100644
--- a/include/power/rk808_pmic.h
+++ b/include/power/rk808_pmic.h
@@ -170,12 +170,24 @@ enum {
 	RK808_NUM_OF_REGS,
 };
 
+enum {
+	RK805_ID = 0x8050,
+	RK808_ID = 0x0000,
+	RK818_ID = 0x8180,
+};
+
+#define RK8XX_ID_MSK	0xfff0
+
 struct rk808_reg_table {
 	char *name;
 	u8 reg_ctl;
 	u8 reg_vol;
 };
 
+struct rk808_priv {
+	int variant;
+};
+
 int rk808_spl_configure_buck(struct udevice *pmic, int buck, int uvolt);
 
 #endif
-- 
2.7.4



More information about the U-Boot mailing list