[U-Boot] [PATCH v8 5/9] rockchip: video: vop: Set different bitwidth for different display mode

[Eric Gao]

Because the bitwidth is different for different display mode, so we need
to set them according to demand.

Signed-off-by: Eric Gao <eric.gao at rock-chips.com>
Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
-Change the bitwidth for different display mode.

 drivers/video/rockchip/rk_vop.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index 6809246..6e0fffa 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -181,13 +181,11 @@ void rkvop_mode_set(struct rk3288_vop *regs,
  *
  * @dev:	VOP device that we want to connect to the display
  * @fbbase:	Frame buffer address
- * @l2bpp	Log2 of bits-per-pixels for the display
  * @ep_node:	Device tree node to process - this is the offset of an endpoint
  *		node within the VOP's 'port' list.
  * @return 0 if OK, -ve if something went wrong
  */
-int rk_display_init(struct udevice *dev, ulong fbbase,
-		    enum video_log2_bpp l2bpp, int ep_node)
+int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
 {
 	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
 	const void *blob = gd->fdt_blob;
@@ -199,6 +197,7 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
 	int ret, remote, i, offset;
 	struct display_plat *disp_uc_plat;
 	struct clk clk;
+	enum video_log2_bpp l2bpp;
 
 	vop_id = fdtdec_get_int(blob, ep_node, "reg", -1);
 	debug("vop_id=%d\n", vop_id);
@@ -253,6 +252,19 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
 		return ret;
 	}
 
+	/* Set bitwidth for vop display according to vop mode */
+	switch (vop_id) {
+	case VOP_MODE_EDP:
+	case VOP_MODE_HDMI:
+	case VOP_MODE_LVDS:
+		l2bpp = VIDEO_BPP16;
+		break;
+	case VOP_MODE_MIPI:
+		l2bpp = VIDEO_BPP32;
+		break;
+	default:
+		l2bpp = VIDEO_BPP16;
+	}
 	rkvop_mode_set(regs, &timing, vop_id);
 
 	rkvop_enable(regs, fbbase, 1 << l2bpp, &timing);
@@ -330,7 +342,7 @@ static int rk_vop_probe(struct udevice *dev)
 	for (node = fdt_first_subnode(blob, port);
 	     node > 0;
 	     node = fdt_next_subnode(blob, node)) {
-		ret = rk_display_init(dev, plat->base, VIDEO_BPP16, node);
+		ret = rk_display_init(dev, plat->base, node);
 		if (ret)
 			debug("Device failed: ret=%d\n", ret);
 		if (!ret)
-- 
1.9.1