[U-Boot] [PATCH 08/11] ARM: at91: ma5d4: Boot from MMC2 when using SAM-BA

[Marek Vasut]

Continue loading U-Boot from MMC2 when the SPL was loaded using SAM-BA
loader. This allows the board to boot system from the removable media
instead of the eMMC, which is useful for commissioning purposes. When
booting from the eMMC, always boot from it as it is not possible to
boot from the SD interface directly.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Andreas Bießmann <andreas.devel at googlemail.com>
---
 board/aries/ma5d4evk/ma5d4evk.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/board/aries/ma5d4evk/ma5d4evk.c b/board/aries/ma5d4evk/ma5d4evk.c
index 0293b29d0e..6393948c49 100644
--- a/board/aries/ma5d4evk/ma5d4evk.c
+++ b/board/aries/ma5d4evk/ma5d4evk.c
@@ -22,6 +22,7 @@
 #include <net.h>
 #include <netdev.h>
 #include <spi.h>
+#include <spl.h>
 #include <version.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -345,6 +346,23 @@ void spl_board_init(void)
 #endif
 }
 
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+
+	switch (spl_boot_list[0]) {
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+		spl_boot_list[0] = BOOT_DEVICE_MMC1;
+		break;
+	case BOOT_DEVICE_SPI:
+		break;
+	case BOOT_DEVICE_USB:
+		spl_boot_list[0] = BOOT_DEVICE_MMC2;
+		break;
+	}
+}
+
 static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 {
 	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
-- 
2.11.0