[U-Boot] [PATCH v4 00/35] ARM: i.MX6: SabreSD: Add dts support

[Jagan Teki]

On Wed, Apr 26, 2017 at 12:57 AM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Jagan,
>
> On Tue, Apr 25, 2017 at 3:35 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>>
>>> This isn't a limitation, all the defconfigs on various boards follows
>>> the same but except by giving dtb explicitly doing make, like
>>> make DEVICE_TREE=imx6l-sabresd
>>
>> Any help?
>
> Take imx6 cubox or imx6 wandboard as reference. We can run the same
> single SPL + u-boot.img on mx6solo/dual/dual-lite/quad versions.
>
> With the dts approach this is no longer possible, correct? In this
> case I do not see a benefit in converting mx6sabresd to dts.

Adding dts make use of DM or new u-boot features much possible, and
even other boards on u-boot use the same way, except making use of
make DEVICE_TREE=<dts_name>

Added Tom, for any other suggestion.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.