[U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC

[Jagan Teki]

On Wed, May 3, 2017 at 5:48 PM, Olliver Schinagl <oliver at schinagl.nl> wrote:
> This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash
> storage.
> https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
>
> It is a assembly variant of the regular Lime2 but featuring eMMC for
> storage.
>
> Signed-off-by: Olliver Schinagl <oliver at schinagl.nl>
> ---
>
> Note: for the board to work properly, the updated eMMC dts variant needs to
> be updated from upstream.
>
>  board/sunxi/MAINTAINERS                    |  5 +++++
>  configs/A20-OLinuXino-Lime2-eMMC_defconfig | 33 ++++++++++++++++++++++++++++++
>  2 files changed, 38 insertions(+)
>  create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 2321b8b08f..84f91fd10b 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -89,6 +89,11 @@ M:   Iain Paton <ipaton0 at gmail.com>
>  S:     Maintained
>  F:     configs/A20-OLinuXino-Lime2_defconfig
>
> +A20-OLINUXINO-LIME2-EMMC BOARD
> +M:     Olliver Schinagl <oliver at schinagl.nl>
> +S:     Maintained
> +F:     configs/A20-OLinuXino-Lime2-eMMC_defconfig
> +
>  A33-OLINUXINO BOARD
>  M:     Stefan Mavrodiev <stefan.mavrodiev at gmail.com>
>  S:     Maintained
> diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
> new file mode 100644
> index 0000000000..1369d2d90b
> --- /dev/null
> +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
> @@ -0,0 +1,33 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN7I=y
> +CONFIG_DRAM_CLK=384
> +CONFIG_MMC0_CD_PIN="PH1"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_USB0_VBUS_PIN="PC17"
> +CONFIG_USB0_VBUS_DET="PH5"
> +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
> +CONFIG_AHCI=y
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
> +CONFIG_SPL=y

These were moved to Kconfig, please sync with latest.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.