[U-Boot] [PATCH 1/3] dm: led: add BCM6358 led driver

Álvaro Fernández Rojas noltari at gmail.com
Wed May 3 13:09:19 UTC 2017


This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 drivers/led/Kconfig       |   7 ++
 drivers/led/Makefile      |   1 +
 drivers/led/led_bcm6358.c | 227 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 235 insertions(+)
 create mode 100644 drivers/led/led_bcm6358.c

diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 50b27bd..e78502b 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -16,6 +16,13 @@ config LED_BCM6328
 	  This option enables support for LEDs connected to the BCM6328
 	  LED HW controller accessed via MMIO registers.
 
+config LED_BCM6358
+	bool "LED Support for BCM6358"
+	depends on LED && ARCH_BMIPS
+	help
+	  This option enables support for LEDs connected to the BCM6358
+	  LED HW controller accessed via MMIO registers.
+
 config LED_BLINK
 	bool "Support LED blinking"
 	depends on LED
diff --git a/drivers/led/Makefile b/drivers/led/Makefile
index d371ed5..9d079f8 100644
--- a/drivers/led/Makefile
+++ b/drivers/led/Makefile
@@ -7,4 +7,5 @@
 
 obj-y += led-uclass.o
 obj-$(CONFIG_LED_BCM6328) += led_bcm6328.o
+obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o
 obj-$(CONFIG_$(SPL_)LED_GPIO) += led_gpio.o
diff --git a/drivers/led/led_bcm6358.c b/drivers/led/led_bcm6358.c
new file mode 100644
index 0000000..f792378
--- /dev/null
+++ b/drivers/led/led_bcm6358.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <led.h>
+#include <asm/io.h>
+#include <dm/lists.h>
+
+#define LEDS_MAX		32
+#define LEDS_WAIT		100
+
+/* LED Mode register */
+#define LED_MODE_REG		0x0
+#define LED_MODE_OFF		0
+#define LED_MODE_ON		1
+#define LED_MODE_MASK		1
+
+/* LED Control register */
+#define LED_CTRL_REG		0x4
+#define LED_CTRL_CLK_MASK	0x3
+#define LED_CTRL_CLK_1		0
+#define LED_CTRL_CLK_2		1
+#define LED_CTRL_CLK_4		2
+#define LED_CTRL_CLK_8		3
+#define LED_CTRL_POL_SHIFT	2
+#define LED_CTRL_POL_MASK	(1 << LED_CTRL_POL_SHIFT)
+#define LED_CTRL_BUSY_SHIFT	3
+#define LED_CTRL_BUSY_MASK	(1 << LED_CTRL_BUSY_SHIFT)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct bcm6358_led_priv {
+	void __iomem *regs;
+	uint8_t pin;
+	bool active_low;
+};
+
+static void bcm6358_led_busy(void __iomem *regs)
+{
+	while (readl_be(regs + LED_CTRL_REG) & LED_CTRL_BUSY_MASK)
+		udelay(LEDS_WAIT);
+}
+
+static unsigned long bcm6358_led_get_mode(struct bcm6358_led_priv *priv)
+{
+	bcm6358_led_busy(priv->regs);
+
+	return (readl_be(priv->regs + LED_MODE_REG) >> priv->pin) &
+	       LED_MODE_MASK;
+}
+
+static int bcm6358_led_set_mode(struct bcm6358_led_priv *priv, uint8_t mode)
+{
+	bcm6358_led_busy(priv->regs);
+
+	clrsetbits_be32(priv->regs + LED_MODE_REG,
+			(LED_MODE_MASK << priv->pin),
+			(mode << priv->pin));
+
+	return 0;
+}
+
+static enum led_state_t bcm6358_led_get_state(struct udevice *dev)
+{
+	struct bcm6358_led_priv *priv = dev_get_priv(dev);
+	enum led_state_t state = LEDST_OFF;
+
+	switch (bcm6358_led_get_mode(priv)) {
+	case LED_MODE_OFF:
+		state = (priv->active_low ? LEDST_ON : LEDST_OFF);
+		break;
+	case LED_MODE_ON:
+		state = (priv->active_low ? LEDST_OFF : LEDST_ON);
+		break;
+	}
+
+	return state;
+}
+
+static int bcm6358_led_set_state(struct udevice *dev, enum led_state_t state)
+{
+	struct bcm6358_led_priv *priv = dev_get_priv(dev);
+	unsigned long mode;
+
+	switch (state) {
+	case LEDST_OFF:
+		mode = (priv->active_low ? LED_MODE_ON : LED_MODE_OFF);
+		break;
+	case LEDST_ON:
+		mode = (priv->active_low ? LED_MODE_OFF : LED_MODE_ON);
+		break;
+	case LEDST_TOGGLE:
+		if (bcm6358_led_get_state(dev) == LEDST_OFF)
+			return bcm6358_led_set_state(dev, LEDST_ON);
+		else
+			return bcm6358_led_set_state(dev, LEDST_OFF);
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return bcm6358_led_set_mode(priv, mode);
+}
+
+static const struct led_ops bcm6358_led_ops = {
+	.get_state = bcm6358_led_get_state,
+	.set_state = bcm6358_led_set_state,
+};
+
+static int bcm6358_led_probe(struct udevice *dev)
+{
+	struct led_uc_plat *uc_plat = dev_get_uclass_platdata(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+
+	/* Top-level LED node */
+	if (!uc_plat->label) {
+		void __iomem *regs;
+		unsigned int clk_div;
+		u32 set_bits = 0;
+
+		addr = dev_get_addr_size_index(dev, 0, &size);
+		if (addr == FDT_ADDR_T_NONE)
+			return -EINVAL;
+
+		regs = ioremap(addr, size);
+
+		if (fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
+				"brcm,clk-dat-low", NULL))
+			set_bits |= LED_CTRL_POL_MASK;
+		clk_div = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
+					  "brcm,clk-div", LED_CTRL_CLK_1);
+		switch (clk_div) {
+		case 8:
+			set_bits |= LED_CTRL_CLK_8;
+			break;
+		case 4:
+			set_bits |= LED_CTRL_CLK_4;
+			break;
+		case 2:
+			set_bits |= LED_CTRL_CLK_2;
+			break;
+		default:
+			set_bits |= LED_CTRL_CLK_1;
+			break;
+		}
+
+		bcm6358_led_busy(regs);
+		clrsetbits_be32(regs + LED_CTRL_REG,
+				LED_CTRL_POL_MASK | LED_CTRL_CLK_MASK,
+				set_bits);
+	} else {
+		struct bcm6358_led_priv *priv = dev_get_priv(dev);
+		unsigned int pin;
+
+		addr = dev_get_addr_size_index(dev_get_parent(dev), 0, &size);
+		if (addr == FDT_ADDR_T_NONE)
+			return -EINVAL;
+
+		pin = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "reg",
+				      LEDS_MAX);
+		if (pin >= LEDS_MAX)
+			return -EINVAL;
+
+		priv->regs = ioremap(addr, size);
+		priv->pin = pin;
+
+		if (fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "active-low",
+				NULL))
+			priv->active_low = true;
+	}
+
+	return 0;
+}
+
+static int bcm6358_led_bind(struct udevice *parent)
+{
+	const void *blob = gd->fdt_blob;
+	int node;
+
+	for (node = fdt_first_subnode(blob, dev_of_offset(parent));
+	     node > 0;
+	     node = fdt_next_subnode(blob, node)) {
+		struct led_uc_plat *uc_plat;
+		struct udevice *dev;
+		const char *label;
+		int ret;
+
+		label = fdt_getprop(blob, node, "label", NULL);
+		if (!label) {
+			debug("%s: node %s has no label\n", __func__,
+			      fdt_get_name(blob, node, NULL));
+			return -EINVAL;
+		}
+
+		ret = device_bind_driver_to_node(parent, "bcm6358-led",
+						 fdt_get_name(blob, node, NULL),
+						 node, &dev);
+		if (ret)
+			return ret;
+
+		uc_plat = dev_get_uclass_platdata(dev);
+		uc_plat->label = label;
+	}
+
+	return 0;
+}
+
+static const struct udevice_id bcm6358_led_ids[] = {
+	{ .compatible = "brcm,bcm6358-leds" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(bcm6358_led) = {
+	.name = "bcm6358-led",
+	.id = UCLASS_LED,
+	.of_match = bcm6358_led_ids,
+	.bind = bcm6358_led_bind,
+	.probe = bcm6358_led_probe,
+	.priv_auto_alloc_size = sizeof(struct bcm6358_led_priv),
+	.ops = &bcm6358_led_ops,
+};
-- 
2.1.4



More information about the U-Boot mailing list