[U-Boot] [PATCH 0/5] dm: rst: add BCM6345 reset controller support

[Álvaro Fernández Rojas]

Broadcom MIPS SoCs have reset controllers which supports asserting and
deasserting each peripheral controller.
Checking reset status is not supported, which is why delays are used.

Álvaro Fernández Rojas (5):
  dm: reset: add BCM6345 reset driver
  mips: bmips: add bcm6345-rst driver support for BCM6358
  mips: bmips: add bcm6345-rst driver support for BCM6328
  mips: bmips: add bcm6345-rst driver support for BCM63268
  mips: bmips: enable bcm6345-reset driver for all BMIPS boards

 arch/mips/dts/brcm,bcm63268.dtsi           |  7 +++
 arch/mips/dts/brcm,bcm6328.dtsi            |  7 +++
 arch/mips/dts/brcm,bcm6358.dtsi            |  7 +++
 configs/comtrend_ar5387un_ram_defconfig    |  3 +
 configs/comtrend_vr3032u_ram_defconfig     |  3 +
 configs/huawei_hg556a_ram_defconfig        |  3 +
 configs/sfr_nb4-ser_ram_defconfig          |  3 +
 drivers/reset/Kconfig                      |  6 ++
 drivers/reset/Makefile                     |  1 +
 drivers/reset/reset-bcm6345.c              | 89 ++++++++++++++++++++++++++++++
 include/dt-bindings/reset/bcm63268-reset.h | 32 +++++++++++
 include/dt-bindings/reset/bcm6328-reset.h  | 24 ++++++++
 include/dt-bindings/reset/bcm6358-reset.h  | 21 +++++++
 13 files changed, 206 insertions(+)
 create mode 100644 drivers/reset/reset-bcm6345.c
 create mode 100644 include/dt-bindings/reset/bcm63268-reset.h
 create mode 100644 include/dt-bindings/reset/bcm6328-reset.h
 create mode 100644 include/dt-bindings/reset/bcm6358-reset.h

-- 
2.1.4