[U-Boot] [PATCH v5 26/33] ARM: i.MX6DL: sabresd: Add dts support for imx6dl_sabresd

[Jagan Teki]

From: Jagan Teki <jagan at amarulasolutions.com>

Add devicetree support for imx6dl_sabresd non-spl board.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 configs/imx6dl_sabresd_defconfig | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/configs/imx6dl_sabresd_defconfig b/configs/imx6dl_sabresd_defconfig
index c61fcd2..17df90b 100644
--- a/configs/imx6dl_sabresd_defconfig
+++ b/configs/imx6dl_sabresd_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SABRESD=y
 CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-sabresd"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
@@ -44,5 +45,18 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_OF_LIBFDT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_ETH=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_USB=y
+# CONFIG_BLK is not set
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
-- 
1.9.1