[U-Boot] [PATCH 13/14] armv8/fsl-layerscape: add dwc3 gadget driver support

[yinbo.zhu]

From: Rajat Srivastava <rajat.srivastava at nxp.com>

Implements the dwc3 gadget driver support for LS1043
platform, and performs below operations:
1. Enables snooping support for DWC3 controller.
2. Enables cache coherency in LS1043 platform.

Signed-off-by: Rajat Srivastava <rajat.srivastava at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: yinbo.zhu <yinbo.zhu at nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            | 93 +++++++++++++++++++++-
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |  7 ++
 2 files changed, 99 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 6e536d1..12b4278 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -25,6 +25,9 @@
 #include <fsl_validate.h>
 #endif
 #include <fsl_immap.h>
+#include <usb.h>
+#include <dwc3-uboot.h>
+#include <linux/usb/xhci-fsl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -570,11 +573,19 @@ void fsl_lsch2_early_init_f(void)
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif
 	/* Make SEC reads and writes snoopable */
+#if defined(CONFIG_LS1043A)
+setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
+SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
+SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
+SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
+SCFG_SNPCNFGCR_USB3WRSNP);
+#else
+/* Make SEC reads and writes snoopable */
 	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
 		     SCFG_SNPCNFGCR_SECWRSNP |
 		     SCFG_SNPCNFGCR_SATARDSNP |
 		     SCFG_SNPCNFGCR_SATAWRSNP);
-
+#endif
 	/*
 	 * Enable snoop requests and DVM message requests for
 	 * Slave insterface S4 (A53 core cluster)
@@ -633,6 +644,86 @@ int qspi_ahb_init(void)
 }
 #endif
 
+#ifdef CONFIG_USB_DWC3
+
+#if defined(CONFIG_LS1043A)
+static struct dwc3_device dwc3_device_data0 = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 0,
+};
+
+static struct dwc3_device dwc3_device_data1 = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 1,
+};
+
+static struct dwc3_device dwc3_device_data2 = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 2,
+};
+
+int usb_gadget_handle_interrupts(int index)
+{
+	dwc3_uboot_handle_interrupt(index);
+	return 0;
+}
+#endif
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	switch (init) {
+	case USB_INIT_DEVICE:
+		switch (index) {
+#if defined(CONFIG_LS1043A)
+		case 0:
+			dwc3_uboot_init(&dwc3_device_data0);
+			break;
+		case 1:
+			dwc3_uboot_init(&dwc3_device_data1);
+			break;
+		case 2:
+			dwc3_uboot_init(&dwc3_device_data2);
+			break;
+#endif
+		default:
+			printf("Invalid Controller Index\n");
+			return -1;
+		}
+#if defined(CONFIG_LS1043A)
+		dwc3_core_incr_burst_enable(index, 0xf, 0xf);
+		dwc3_core_set_snooping(index, true);
+#endif
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	switch (init) {
+	case USB_INIT_DEVICE:
+#if defined(CONFIG_LS1043A)
+		dwc3_uboot_exit(index);
+#endif
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+#endif
+
+
+
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 9ac124f..5255cdd 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -361,6 +361,13 @@ struct ccsr_gur {
 
 #define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
 #define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
+#define SCFG_SNPCNFGCR_USB1RDSNP       0x00200000
+#define SCFG_SNPCNFGCR_USB1WRSNP       0x00100000
+#define SCFG_SNPCNFGCR_USB2RDSNP       0x00008000
+#define SCFG_SNPCNFGCR_USB2WRSNP       0x00010000
+#define SCFG_SNPCNFGCR_USB3RDSNP       0x00002000
+#define SCFG_SNPCNFGCR_USB3WRSNP       0x00004000
+
 #define SCFG_SNPCNFGCR_SATARDSNP	0x00800000
 #define SCFG_SNPCNFGCR_SATAWRSNP	0x00400000
 
-- 
2.1.0.27.g96db324