[U-Boot] [PATCH 2/2][v5] armv8: ls2080aqds: Add support for SD boot
Santan Kumar
santan.kumar at nxp.com
Fri May 5 10:12:29 UTC 2017
Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini at nxp.com>
---
Changes in v5:
1. Update MAINTAINERS file
2. Updated the memory layout
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 6 +--
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 6 +--
board/freescale/ls2080a/ls2080a.c | 6 +--
board/freescale/ls2080aqds/MAINTAINERS | 1 +
board/freescale/ls2080aqds/README | 13 +++++
board/freescale/ls2080aqds/eth.c | 8 +---
board/freescale/ls2080aqds/ls2080aqds.c | 4 +-
configs/ls2080aqds_sdcard_defconfig | 55 ++++++++++++++++++++++
include/configs/ls2080a_common.h | 9 +++-
include/configs/ls2080aqds.h | 27 ++++++++++-
10 files changed, 116 insertions(+), 19 deletions(-)
create mode 100644 configs/ls2080aqds_sdcard_defconfig
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index bb02960..e5da7a2 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -462,7 +462,7 @@ int cpu_eth_init(bd_t *bis)
{
int error = 0;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
error = fsl_mc_ldpaa_init(bis);
#endif
#ifdef CONFIG_FMAN_ENET
@@ -606,7 +606,7 @@ phys_size_t board_reserve_ram_top(phys_size_t ram_size)
{
phys_size_t ram_top = ram_size;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* The start address of MC reserved memory needs to be aligned. */
ram_top -= mc_get_dram_block_size();
ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
@@ -721,7 +721,7 @@ int dram_init_banksize(void)
}
#endif /* CONFIG_SYS_MEM_RESERVE_SECURE */
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* Assign memory for MC */
#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
if (gd->bd->bi_dram[2].size >=
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index 955e0b7..ef97556 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -18,7 +18,7 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
#endif
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
int xfi_dpmac[XFI8 + 1];
int sgmii_dpmac[SGMII16 + 1];
#endif
@@ -110,7 +110,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
else {
serdes_prtcl_map[lane_prtcl] = 1;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
switch (lane_prtcl) {
case QSGMII_A:
case QSGMII_B:
@@ -141,7 +141,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
void fsl_serdes_init(void)
{
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
int i , j;
for (i = XFI1, j = 1; i <= XFI8; i++, j++)
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 9e7701d..b357eaa 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -64,13 +64,13 @@ int board_eth_init(bd_t *bis)
error = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
error = cpu_eth_init(bis);
#endif
return error;
}
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
void fdt_fixup_board_enet(void *fdt)
{
int offset;
@@ -128,7 +128,7 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
fdt_fixup_board_enet(blob);
#endif
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 79877d7..62c8fac 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -7,6 +7,7 @@ F: include/configs/ls2080aqds.h
F: configs/ls2080aqds_defconfig
F: configs/ls2080aqds_nand_defconfig
F: configs/ls2080aqds_qspi_defconfig
+F: configs/ls2080aqds_sdcard_defconfig
LS2080A_SECURE_BOOT BOARD
M: Saksham Jain <saksham.jain at nxp.freescale.com>
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index 2808bd5..d46b394 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -89,6 +89,19 @@ c) NAND boot
d) SD boot
e) QSPI boot
+Memory map for SD boot
+-------------------------
+Image Flash Offset SD Card
+ Start Block No.
+RCW+PBI 0x00000000 0x00008
+Boot firmware (U-Boot) 0x00100000 0x00800
+Boot firmware Environment 0x00300000 0x01800
+PPA firmware 0x00400000 0x02000
+DPAA2 MC 0x00A00000 0x05000
+DPAA2 DPL 0x00D00000 0x06800
+DPAA2 DPC 0x00E00000 0x07000
+Kernel.itb 0x01000000 0x08000
+
Environment Variables
---------------------
- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 59361e9..302ff76 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -22,7 +22,7 @@
#define MC_BOOT_ENV_VAR "mcinitcmd"
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
* Bank 1 -> Lanes A, B, C, D, E, F, G, H
* Bank 2 -> Lanes A,B, C, D, E, F, G, H
@@ -834,8 +834,8 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
int board_eth_init(bd_t *bis)
{
int error;
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
char *mc_boot_env_var;
-#ifdef CONFIG_FSL_MC_ENET
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
@@ -918,7 +918,3 @@ int board_eth_init(bd_t *bis)
error = pci_eth_init(bis);
return error;
}
-
-#ifdef CONFIG_FSL_MC_ENET
-
-#endif
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 6da9c6c..f36fb98 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -280,7 +280,7 @@ int arch_misc_init(void)
}
#endif
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
void fdt_fixup_board_enet(void *fdt)
{
int offset;
@@ -336,7 +336,7 @@ int ft_board_setup(void *blob, bd_t *bd)
fsl_fdt_fixup_dr_usb(blob, bd);
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
fdt_fixup_board_enet(blob);
#endif
diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig
new file mode 100644
index 0000000..c1a93b9
--- /dev/null
+++ b/configs/ls2080aqds_sdcard_defconfig
@@ -0,0 +1,55 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_SPL=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 12078c3..8160036 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -197,10 +197,17 @@ unsigned long long get_qixis_addr(void);
"earlycon=uart8250,mmio,0x21c0500 " \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
" hugepagesz=2m hugepages=256"
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_BOOTCOMMAND "mmc read 0x80200000 0x6800 0x800;"\
+ " fsl_mc apply dpl 0x80200000 &&" \
+ " mmc read $kernel_load $kernel_start" \
+ " $kernel_size && bootm $kernel_load"
+#else
#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \
" cp.b $kernel_start $kernel_load" \
" $kernel_size && bootm $kernel_load"
-
+#endif
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 4c48562..44165a9 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -165,12 +165,14 @@ unsigned long get_board_ddr_clk(void);
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
#define QIXIS_LBMAP_NAND 0x09
+#define QIXIS_LBMAP_SD 0x00
#define QIXIS_LBMAP_QSPI 0x0f
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_RCW_SRC_NAND 0x107
+#define QIXIS_RCW_SRC_SD 0x40
#define QIXIS_RCW_SRC_QSPI 0x62
#define QIXIS_RST_FORCE_MEM 0x01
@@ -234,6 +236,11 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SPL_PAD_TO 0x20000
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 * 1024)
#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024)
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET 0x200000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x20000
#endif
#else
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
@@ -375,7 +382,25 @@ unsigned long get_board_ddr_clk(void);
"esbc_validate 0x580cc0000;" \
"fsl_mc start mc 0x580300000" \
" 0x580800000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x90100000\0" \
+ "kernel_addr=0x800\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x8000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x14000\0" \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000 \0"
#else
+#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
@@ -393,7 +418,7 @@ unsigned long get_board_ddr_clk(void);
#endif /* CONFIG_SECURE_BOOT */
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
#define CONFIG_FSL_MEMAC
#define CONFIG_PHYLIB
#define CONFIG_PHYLIB_10G
--
1.9.1
More information about the U-Boot
mailing list