[U-Boot] i.Mx6q u-boot stuck
Fausto Sessego
fausto.sessego at infomob.it
Fri May 5 10:50:27 UTC 2017
Ok,
now it seems to work fine.
I have another question:
the define
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
what does it mean?
I have 2 sd card in my custom board:
1) SD3 used like mass storage
2) SD4 used to load the SO
thanks
------------------------------
*Ing. Fausto Sessego*
*R&D Hardware & Software Engineer*
info
mob
>
*Tecnologie Wireless per la logistica e la sicurezza*
*address:* Parco scientifico e tecnologico della Sardegna, Edificio 1 Loc.
Piscinamanna - 09010 Pula (CA)
<https://www.google.it/maps/place/Sardegna+Ricerche/@38.9899811,8.9280376,17z/data=!3m1!4b1!4m2!3m1!1s0x12e7274e0b4c4191:0x1a9e7f06456bbd3>
*phone:* +39 070 92432952
*email:* fausto.sessego at infomob.it
*skype:* fausto.sessego.infomob
*web:* www.infomob.it
2017-04-11 15:01 GMT+02:00 Fabio Estevam <festevam at gmail.com>:
>
>
> On Tue, Apr 11, 2017 at 8:20 AM, Fausto Sessego <fausto.sessego at infomob.it
> > wrote:
>
>> what do you suggest?
>>
>> How can i check if the ram configuration is right?
>>
>
> https://community.nxp.com/docs/DOC-331930
>
> https://community.nxp.com/docs/DOC-105652
>
>
More information about the U-Boot
mailing list