[U-Boot] [PATCH 1/3] armv8: ls1088ardb: Memory Map modification of kernel, mc, dpl, dpc.
Amrita Kumari
amrita.kumari at nxp.com
Fri May 5 06:08:10 UTC 2017
This patch adjusts memory map for images on LS1088ARDB,
as per below memory map for NOR flash:
Image Flash Offset
RCW+PBI 0x00000000
Boot firmware (U-Boot) 0x00100000
Boot firmware Environment 0x00300000
PPA firmware 0x00400000
DPAA2 MC 0x00A00000
DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
Kernel.itb 0x01000000
Signed-off-by: Amrita Kumari <amrita.kumari at nxp.com>
---
include/configs/ls1088a_common.h | 12 ++++++------
include/configs/ls1088ardb.h | 34 ++++++++++++++++------------------
2 files changed, 22 insertions(+), 24 deletions(-)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index ee79470..323a485 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -179,29 +179,29 @@ unsigned long long get_qixis_addr(void);
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581200000\0" \
+ "kernel_start=0x581000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"console=ttyAMA0,38400n8\0" \
- "mcinitcmd=fsl_mc start mc 0x580300000" \
- " 0x580800000 \0"
+ "mcinitcmd=fsl_mc start mc 0x580a00000" \
+ " 0x580e00000 \0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500 " \
"ramdisk_size=0x3000000 default_hugepagesz=2m" \
" hugepagesz=2m hugepages=256"
#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read 0x80200000 0x700000 0x100000;"\
+#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read 0x80200000 0xd00000 0x100000;"\
" fsl_mc apply dpl 0x80200000 &&" \
" sf read $kernel_load $kernel_start" \
" $kernel_size && bootm $kernel_load"
#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x3800 0x800;"\
+#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
" fsl_mc apply dpl 0x80200000 &&" \
" mmc read $kernel_load $kernel_start" \
" $kernel_size && bootm $kernel_load"
#else
-#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \
+#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \
" cp.b $kernel_start $kernel_load" \
" $kernel_size && bootm $kernel_load"
#endif
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index e6bbfb8..b2a0da4 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -16,18 +16,18 @@
#endif
#if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET (2 * 1024 * 1024)
+#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x2000
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
-#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */
+#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
#define CONFIG_ENV_SECT_SIZE 0x40000
#else
#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x20000
#endif
@@ -299,13 +299,13 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x1100000\0" \
+ "kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcinitcmd=sf probe 0:0;sf read 0xa0300000 0x300000 0x100000;" \
- "sf read 0xa0c80000 0xc80000 0x100000; esbc_validate 0xa0c80000;" \
- "sf read 0xa0800000 0x800000 0x100000;" \
- "sf read 0xa0cc0000 0xcc0000 0x100000;esbc_validate 0xa0cc0000;" \
+ "mcinitcmd=sf probe 0:0;sf read 0xa0300000 0xA00000 0x100000;" \
+ "sf read 0xa0700000 0x700000 0x100000; esbc_validate 0xa0700000;" \
+ "sf read 0xa0800000 0xE00000 0x100000;" \
+ "sf read 0xa0740000 0x740000 0x100000;esbc_validate 0xa0740000;" \
"fsl_mc start mc 0xa0300000 0xa0800000\0" \
"mcmemsize=0x70000000 \0"
#else /* if !(CONFIG_SECURE_BOOT) */
@@ -318,11 +318,11 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x1100000\0" \
+ "kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcinitcmd=sf probe 0:0;sf read 0x80000000 0x300000 0x100000;" \
- "sf read 0x80100000 0x800000 0x100000;" \
+ "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
+ "sf read 0x80100000 0xE00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000 \0"
#endif /* CONFIG_SECURE_BOOT */
@@ -336,11 +336,11 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x8800\0" \
+ "kernel_start=0x8000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x14000\0" \
- "mcinitcmd=mmcinfo;mmc read 0x80000000 0x1800 0x800;" \
- "mmc read 0x80100000 0x4000 0x800;" \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000 \0"
@@ -355,12 +355,10 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x1100000\0" \
+ "kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcinitcmd=fsl_mc start mc 0x580300000 0x580800000\0" \
- "sf read 0x80100000 0x800000 0x100000;" \
- "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0" \
"mcmemsize=0x70000000 \0"
#endif
--
2.7.4
More information about the U-Boot
mailing list