[U-Boot] [PATCH v3 3/4] rockchip: board: puma_rk3399: derive ethaddr from cpuid

Philipp Tomsich philipp.tomsich at theobroma-systems.com
Fri May 5 17:21:40 UTC 2017


From: Klaus Goger <klaus.goger at theobroma-systems.com>

Generate a MAC address based on the cpuid available in the efuse
block: Use the first 6 byte of the cpuid's SHA256 hash and set the
locally administered bits. Also ensure that the multicast bit is
cleared.

The MAC address is only generated and set if there is no ethaddr
present in the saved environment.

Signed-off-by: Klaus Goger <klaus.goger at theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v3:
- uses uclass_get_device_by_driver() to ensure we don't pick up the wrong
  misc-device

Changes in v2:
- added derivation of ethaddr from cpuid

 board/theobroma-systems/puma_rk3399/puma-rk3399.c | 43 +++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 72719f3..8ddca31 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -16,6 +16,7 @@
 #include <ram.h>
 #include <usb.h>
 #include <dwc3-uboot.h>
+#include <u-boot/sha256.h>
 
 #define RK3399_CPUID_OFF  0x7
 #define RK3399_CPUID_LEN  0x10
@@ -70,6 +71,42 @@ out:
 	return 0;
 }
 
+static void setup_macaddr(void)
+{
+#if CONFIG_IS_ENABLED(CMD_NET)
+	int ret;
+	const char *cpuid = getenv("cpuid#");
+	u8 hash[SHA256_SUM_LEN];
+	int size = sizeof(hash);
+	u8 mac_addr[6];
+
+	/* Only generate a MAC address, if none is set in the environment */
+	if (getenv("ethaddr"))
+		return;
+
+	if (!cpuid) {
+		debug("%s: could not retrieve 'cpuid#'\n", __func__);
+		return;
+	}
+
+	ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
+	if (ret) {
+		debug("%s: failed to calculate SHA256\n", __func__);
+		return;
+	}
+
+	/* Copy 6 bytes of the hash to base the MAC address on */
+	memcpy(mac_addr, hash, 6);
+
+	/* Make this a valid MAC address and set it */
+	mac_addr[0] &= 0xfe;  /* clear multicast bit */
+	mac_addr[0] |= 0x02;  /* set local assignment bit (IEEE802) */
+	eth_setenv_enetaddr("ethaddr", mac_addr);
+#endif
+
+	return;
+}
+
 static void setup_serial(void)
 {
 #if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
@@ -81,8 +118,9 @@ static void setup_serial(void)
 	u64 serialno;
 	char serialno_str[16];
 
-	/* the first misc device will be used */
-	ret = uclass_get_device(UCLASS_MISC, 0, &dev);
+	/* retrieve the device */
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_GET_DRIVER(rockchip_efuse), &dev);
 	if (ret) {
 		debug("%s: could not find efuse device\n", __func__);
 		return;
@@ -125,6 +163,7 @@ static void setup_serial(void)
 int misc_init_r(void)
 {
 	setup_serial();
+	setup_macaddr();
 
 	return 0;
 }
-- 
1.9.1



More information about the U-Boot mailing list