[U-Boot] [PATCH v3 2/8] rockchip: video: rk3399: enable HDMI output (from the rk_vop) for the RK3399
Philipp Tomsich
philipp.tomsich at theobroma-systems.com
Fri May 5 19:48:27 UTC 2017
This commit enables RK3399 support for HDMI through the following
changes:
- adds a driverdata structure to mirror some subtle version
differences between the RK3399 VOPs and those in the RK3288
(e.g. the pin-polarity configuration)
- configures the VOP to output 32bpp for HDMI
- handles whether a VOP can output 10BIT data or not (i.e. RGBaaa vs. RGB888)
using the driverdata structure
And as we touch this file anyway, we also increase the size of the
framebuffer to a slightly overzealous 4K2K at 32bpp.
Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---
Changes in v3:
- splits the VOP driver into SOC-specific and common portions
- moves the "maximum x" and "maximum y" resolution config into Kconfig (instead
of having hard-coded values that may need to be revised each time someone adds
a new device or new features)
Changes in v2: None
arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 11 ++
drivers/video/rockchip/Kconfig | 29 +++-
drivers/video/rockchip/Makefile | 2 +
drivers/video/rockchip/rk3288_vop.c | 95 ++++++++++++
drivers/video/rockchip/rk3399_vop.c | 105 ++++++++++++++
drivers/video/rockchip/rk_vop.c | 185 ++++++++++++------------
drivers/video/rockchip/rk_vop.h | 32 ++++
7 files changed, 359 insertions(+), 100 deletions(-)
create mode 100644 drivers/video/rockchip/rk3288_vop.c
create mode 100644 drivers/video/rockchip/rk3399_vop.c
create mode 100644 drivers/video/rockchip/rk_vop.h
diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
index d5599ec..21e59be 100644
--- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
@@ -197,9 +197,20 @@ enum vop_modes {
#define V_DSP_DEN_POL(x) (((x) & 1) << 6)
#define V_DSP_VSYNC_POL(x) (((x) & 1) << 5)
#define V_DSP_HSYNC_POL(x) (((x) & 1) << 4)
+#define V_DSP_PIN_POL(x) (((x) & 0xf) << 4)
#define V_DSP_OUT_MODE(x) ((x) & 0xf)
/* VOP_DSP_CTRL1 */
+#define V_RK3399_DSP_MIPI_POL(x) ((x) << 28)
+#define V_RK3399_DSP_EDP_POL(x) ((x) << 24)
+#define V_RK3399_DSP_HDMI_POL(x) ((x) << 20)
+#define V_RK3399_DSP_LVDS_POL(x) ((x) << 16)
+
+#define M_RK3399_DSP_MIPI_POL (V_RK3399_DSP_MIPI_POL(0xf))
+#define M_RK3399_DSP_EDP_POL (V_RK3399_DSP_EDP_POL(0xf))
+#define M_RK3399_DSP_HDMI_POL (V_RK3399_DSP_HDMI_POL(0xf))
+#define M_RK3399_DSP_LVDS_POL (V_RK3399_DSP_LVDS_POL(0xf))
+
#define M_DSP_LAYER3_SEL (3 << 14)
#define M_DSP_LAYER2_SEL (3 << 12)
#define M_DSP_LAYER1_SEL (3 << 10)
diff --git a/drivers/video/rockchip/Kconfig b/drivers/video/rockchip/Kconfig
index 80e399f..b1d7c62 100644
--- a/drivers/video/rockchip/Kconfig
+++ b/drivers/video/rockchip/Kconfig
@@ -12,11 +12,30 @@ menuconfig VIDEO_ROCKCHIP
bool "Enable Rockchip Video Support"
depends on DM_VIDEO
help
- Rockchip SoCs provide video output capabilities for High-Definition
- Multimedia Interface (HDMI), Low-voltage Differential Signalling
- (LVDS), embedded DisplayPort (eDP) and Display Serial Interface
- (DSI). This driver supports the on-chip video output device, and
- targets the Rockchip RK3288 and RK3399.
+ Rockchip SoCs provide video output capabilities for High-Definition
+ Multimedia Interface (HDMI), Low-voltage Differential Signalling
+ (LVDS), embedded DisplayPort (eDP) and Display Serial Interface (DSI).
+
+ This driver supports the on-chip video output device, and targets the
+ Rockchip RK3288 and RK3399.
+
+config VIDEO_ROCKCHIP_MAX_XRES
+ int "Maximum horizontal resolution (for memory allocation purposes)"
+ depends on VIDEO_ROCKCHIP
+ default 1920
+ help
+ The maximum horizontal resolution to support for the framebuffer.
+ This configuration is used for reserving/allocating memory for the
+ framebuffer during device-model binding/probing.
+
+config VIDEO_ROCKCHIP_MAX_YRES
+ int "Maximum vertical resolution (for memory allocation purposes)"
+ depends on VIDEO_ROCKCHIP
+ default 1080
+ help
+ The maximum vertical resolution to support for the framebuffer.
+ This configuration is used for reserving/allocating memory for the
+ framebuffer during device-model binding/probing.
if VIDEO_ROCKCHIP
diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile
index cd54b12..495d5f7 100644
--- a/drivers/video/rockchip/Makefile
+++ b/drivers/video/rockchip/Makefile
@@ -7,6 +7,8 @@
ifdef CONFIG_VIDEO_ROCKCHIP
obj-y += rk_vop.o
+obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288_vop.o
+obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399_vop.o
obj-$(CONFIG_DISPLAY_ROCKCHIP_EDP) += rk_edp.o
obj-$(CONFIG_DISPLAY_ROCKCHIP_LVDS) += rk_lvds.o
obj-$(CONFIG_DISPLAY_ROCKCHIP_HDMI) += rk_hdmi.o
diff --git a/drivers/video/rockchip/rk3288_vop.c b/drivers/video/rockchip/rk3288_vop.c
new file mode 100644
index 0000000..e3e1ec7
--- /dev/null
+++ b/drivers/video/rockchip/rk3288_vop.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <video.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/grf_rk3288.h>
+#include "rk_vop.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void rk3288_set_pin_polarity(struct udevice *dev,
+ enum vop_modes mode, u32 polarity)
+{
+ struct rk_vop_priv *priv = dev_get_priv(dev);
+ struct rk3288_vop *regs = priv->regs;
+
+ /* The RK3328 VOP (v3.1) has its polarity configuration in ctrl0 */
+ clrsetbits_le32(®s->dsp_ctrl0,
+ M_DSP_DCLK_POL | M_DSP_DEN_POL |
+ M_DSP_VSYNC_POL | M_DSP_HSYNC_POL,
+ V_DSP_PIN_POL(polarity));
+}
+
+static void rk3288_set_io_vsel(struct udevice *dev)
+{
+ struct rk3288_grf *grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+ /* lcdc(vop) iodomain select 1.8V */
+ rk_setreg(&grf->io_vsel, 1 << 0);
+}
+
+/*
+ * Try some common regulators. We should really get these from the
+ * device tree somehow.
+ */
+static const char * const rk3288_regulator_names[] = {
+ "vcc18_lcd",
+ "VCC18_LCD",
+ "vdd10_lcd_pwren_h",
+ "vdd10_lcd",
+ "VDD10_LCD",
+ "vcc33_lcd"
+};
+
+static int rk3288_vop_probe(struct udevice *dev)
+{
+ /* Before relocation we don't need to do anything */
+ if (!(gd->flags & GD_FLG_RELOC))
+ return 0;
+
+ /* Set the LCDC(vop) iodomain to 1.8V */
+ rk3288_set_io_vsel(dev);
+
+ /* Probe regulators required for the RK3288 VOP */
+ rk_vop_probe_regulators(dev, rk3288_regulator_names,
+ ARRAY_SIZE(rk3288_regulator_names));
+
+ return rk_vop_probe(dev);
+}
+
+struct rkvop_driverdata rk3288_driverdata = {
+ .features = VOP_FEATURE_OUTPUT_10BIT,
+ .set_pin_polarity = rk3288_set_pin_polarity,
+};
+
+static const struct udevice_id rk3288_vop_ids[] = {
+ { .compatible = "rockchip,rk3288-vop",
+ .data = (ulong)&rk3288_driverdata },
+ { }
+};
+
+static const struct video_ops rk3288_vop_ops = {
+};
+
+U_BOOT_DRIVER(rk_vop) = {
+ .name = "rk3288_vop",
+ .id = UCLASS_VIDEO,
+ .of_match = rk3288_vop_ids,
+ .ops = &rk3288_vop_ops,
+ .bind = rk_vop_bind,
+ .probe = rk3288_vop_probe,
+ .priv_auto_alloc_size = sizeof(struct rk_vop_priv),
+};
diff --git a/drivers/video/rockchip/rk3399_vop.c b/drivers/video/rockchip/rk3399_vop.c
new file mode 100644
index 0000000..91a40ab
--- /dev/null
+++ b/drivers/video/rockchip/rk3399_vop.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <regmap.h>
+#include <video.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "rk_vop.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void rk3399_set_pin_polarity(struct udevice *dev,
+ enum vop_modes mode, u32 polarity)
+{
+ struct rk_vop_priv *priv = dev_get_priv(dev);
+ struct rk3288_vop *regs = priv->regs;
+
+ /*
+ * The RK3399 VOPs (v3.5 and v3.6) require a per-mode setting of
+ * the polarity configuration (in ctrl1).
+ */
+ switch (mode) {
+ case VOP_MODE_HDMI:
+ clrsetbits_le32(®s->dsp_ctrl1,
+ M_RK3399_DSP_HDMI_POL,
+ V_RK3399_DSP_HDMI_POL(polarity));
+ break;
+
+ case VOP_MODE_EDP:
+ clrsetbits_le32(®s->dsp_ctrl1,
+ M_RK3399_DSP_EDP_POL,
+ V_RK3399_DSP_EDP_POL(polarity));
+ break;
+
+ case VOP_MODE_MIPI:
+ clrsetbits_le32(®s->dsp_ctrl1,
+ M_RK3399_DSP_MIPI_POL,
+ V_RK3399_DSP_MIPI_POL(polarity));
+ break;
+
+ case VOP_MODE_LVDS:
+ /* The RK3399 has neither parallel RGB nor LVDS output. */
+ default:
+ debug("%s: unsupported output mode %x\n", __func__, mode);
+ }
+}
+
+/*
+ * Try some common regulators. We should really get these from the
+ * device tree somehow.
+ */
+static const char * const rk3399_regulator_names[] = {
+ "vcc33_lcd"
+};
+
+static int rk3399_vop_probe(struct udevice *dev)
+{
+ /* Before relocation we don't need to do anything */
+ if (!(gd->flags & GD_FLG_RELOC))
+ return 0;
+
+ /* Probe regulators required for the RK3399 VOP */
+ rk_vop_probe_regulators(dev, rk3399_regulator_names,
+ ARRAY_SIZE(rk3399_regulator_names));
+
+ return rk_vop_probe(dev);
+}
+
+struct rkvop_driverdata rk3399_lit_driverdata = {
+ .set_pin_polarity = rk3399_set_pin_polarity,
+};
+
+struct rkvop_driverdata rk3399_big_driverdata = {
+ .features = VOP_FEATURE_OUTPUT_10BIT,
+ .set_pin_polarity = rk3399_set_pin_polarity,
+};
+
+static const struct udevice_id rk3399_vop_ids[] = {
+ { .compatible = "rockchip,rk3399-vop-big",
+ .data = (ulong)&rk3399_big_driverdata },
+ { .compatible = "rockchip,rk3399-vop-lit",
+ .data = (ulong)&rk3399_lit_driverdata },
+ { }
+};
+
+static const struct video_ops rk3399_vop_ops = {
+};
+
+U_BOOT_DRIVER(rk3399_vop) = {
+ .name = "rk3399_vop",
+ .id = UCLASS_VIDEO,
+ .of_match = rk3399_vop_ids,
+ .ops = &rk3399_vop_ops,
+ .bind = rk_vop_bind,
+ .probe = rk3399_vop_probe,
+ .priv_auto_alloc_size = sizeof(struct rk_vop_priv),
+};
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index aa6ca8c..c15f93d 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -17,24 +17,25 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
-#include <asm/arch/cru_rk3288.h>
-#include <asm/arch/grf_rk3288.h>
#include <asm/arch/edp_rk3288.h>
#include <asm/arch/vop_rk3288.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
-#include <dt-bindings/clock/rk3288-cru.h>
#include <power/regulator.h>
+#include "rk_vop.h"
DECLARE_GLOBAL_DATA_PTR;
-struct rk_vop_priv {
- struct rk3288_vop *regs;
- struct rk3288_grf *grf;
+enum vop_pol {
+ HSYNC_POSITIVE = 0,
+ VSYNC_POSITIVE = 1,
+ DEN_NEGATIVE = 2,
+ DCLK_INVERT = 3
};
-void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
- int fb_bits_per_pixel, const struct display_timing *edid)
+static void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
+ int fb_bits_per_pixel,
+ const struct display_timing *edid)
{
u32 lb_mode;
u32 rgb_mode;
@@ -89,54 +90,83 @@ void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
writel(0x01, ®s->reg_cfg_done); /* enable reg config */
}
-void rkvop_mode_set(struct rk3288_vop *regs,
- const struct display_timing *edid, enum vop_modes mode)
+static void rkvop_set_pin_polarity(struct udevice *dev,
+ enum vop_modes mode, u32 polarity)
{
- u32 hactive = edid->hactive.typ;
- u32 vactive = edid->vactive.typ;
- u32 hsync_len = edid->hsync_len.typ;
- u32 hback_porch = edid->hback_porch.typ;
- u32 vsync_len = edid->vsync_len.typ;
- u32 vback_porch = edid->vback_porch.typ;
- u32 hfront_porch = edid->hfront_porch.typ;
- u32 vfront_porch = edid->vfront_porch.typ;
- uint flags;
- int mode_flags;
+ struct rkvop_driverdata *ops =
+ (struct rkvop_driverdata *)dev_get_driver_data(dev);
+
+ if (ops->set_pin_polarity)
+ ops->set_pin_polarity(dev, mode, polarity);
+}
+
+static void rkvop_enable_output(struct udevice *dev, enum vop_modes mode)
+{
+ struct rk_vop_priv *priv = dev_get_priv(dev);
+ struct rk3288_vop *regs = priv->regs;
switch (mode) {
case VOP_MODE_HDMI:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_HDMI_OUT_EN(1));
break;
+
case VOP_MODE_EDP:
- default:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_EDP_OUT_EN(1));
break;
+
case VOP_MODE_LVDS:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_RGB_OUT_EN(1));
break;
+
case VOP_MODE_MIPI:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_MIPI_OUT_EN(1));
- break;
+ break;
+
+ default:
+ debug("%s: unsupported output mode %x\n", __func__, mode);
}
+}
- if (mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP)
- /* RGBaaa */
- mode_flags = 15;
- else
- /* RGB888 */
- mode_flags = 0;
+static void rkvop_mode_set(struct udevice *dev,
+ const struct display_timing *edid,
+ enum vop_modes mode)
+{
+ struct rk_vop_priv *priv = dev_get_priv(dev);
+ struct rk3288_vop *regs = priv->regs;
+ struct rkvop_driverdata *data =
+ (struct rkvop_driverdata *)dev_get_driver_data(dev);
- flags = V_DSP_OUT_MODE(mode_flags) |
- V_DSP_HSYNC_POL(!!(edid->flags & DISPLAY_FLAGS_HSYNC_HIGH)) |
- V_DSP_VSYNC_POL(!!(edid->flags & DISPLAY_FLAGS_VSYNC_HIGH));
+ u32 hactive = edid->hactive.typ;
+ u32 vactive = edid->vactive.typ;
+ u32 hsync_len = edid->hsync_len.typ;
+ u32 hback_porch = edid->hback_porch.typ;
+ u32 vsync_len = edid->vsync_len.typ;
+ u32 vback_porch = edid->vback_porch.typ;
+ u32 hfront_porch = edid->hfront_porch.typ;
+ u32 vfront_porch = edid->vfront_porch.typ;
+ int mode_flags;
+ u32 pin_polarity;
+
+ pin_polarity = BIT(DCLK_INVERT);
+ if (edid->flags & DISPLAY_FLAGS_HSYNC_HIGH)
+ pin_polarity |= BIT(HSYNC_POSITIVE);
+ if (edid->flags & DISPLAY_FLAGS_VSYNC_HIGH)
+ pin_polarity |= BIT(VSYNC_POSITIVE);
+
+ rkvop_set_pin_polarity(dev, mode, pin_polarity);
+ rkvop_enable_output(dev, mode);
- clrsetbits_le32(®s->dsp_ctrl0,
- M_DSP_OUT_MODE | M_DSP_VSYNC_POL | M_DSP_HSYNC_POL,
- flags);
+ mode_flags = 0; /* RGB888 */
+ if ((data->features & VOP_FEATURE_OUTPUT_10BIT) &&
+ (mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP))
+ mode_flags = 15; /* RGBaaa */
+
+ clrsetbits_le32(®s->dsp_ctrl0, M_DSP_OUT_MODE,
+ V_DSP_OUT_MODE(mode_flags));
writel(V_HSYNC(hsync_len) |
V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch),
@@ -185,7 +215,7 @@ void rkvop_mode_set(struct rk3288_vop *regs,
* node within the VOP's 'port' list.
* @return 0 if OK, -ve if something went wrong
*/
-int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
+static int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
{
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
const void *blob = gd->fdt_blob;
@@ -255,18 +285,18 @@ int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
/* Set bitwidth for vop display according to vop mode */
switch (vop_id) {
case VOP_MODE_EDP:
- case VOP_MODE_HDMI:
case VOP_MODE_LVDS:
l2bpp = VIDEO_BPP16;
break;
+ case VOP_MODE_HDMI:
case VOP_MODE_MIPI:
l2bpp = VIDEO_BPP32;
break;
default:
l2bpp = VIDEO_BPP16;
}
- rkvop_mode_set(regs, &timing, vop_id);
+ rkvop_mode_set(dev, &timing, vop_id);
rkvop_enable(regs, fbbase, 1 << l2bpp, &timing);
ret = display_enable(disp, 1 << l2bpp, &timing);
@@ -281,53 +311,37 @@ int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
return 0;
}
-static int rk_vop_probe(struct udevice *dev)
+void rk_vop_probe_regulators(struct udevice *dev,
+ const char * const *names, int cnt)
+{
+ int i, ret;
+ const char *name;
+ struct udevice *reg;
+
+ for (i = 0; i < cnt; ++i) {
+ name = names[i];
+ debug("%s: probing regulator '%s'\n", dev->name, name);
+
+ ret = regulator_autoset_by_name(name, ®);
+ if (!ret)
+ ret = regulator_set_enable(reg, true);
+ }
+}
+
+int rk_vop_probe(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
const void *blob = gd->fdt_blob;
struct rk_vop_priv *priv = dev_get_priv(dev);
- struct udevice *reg;
- int ret, port, node;
+ int ret = 0;
+ int port, node;
/* Before relocation we don't need to do anything */
if (!(gd->flags & GD_FLG_RELOC))
return 0;
- priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
priv->regs = (struct rk3288_vop *)dev_get_addr(dev);
- /* lcdc(vop) iodomain select 1.8V */
- rk_setreg(&priv->grf->io_vsel, 1 << 0);
-
- /*
- * Try some common regulators. We should really get these from the
- * device tree somehow.
- */
- ret = regulator_autoset_by_name("vcc18_lcd", ®);
- if (ret)
- debug("%s: Cannot autoset regulator vcc18_lcd\n", __func__);
- ret = regulator_autoset_by_name("VCC18_LCD", ®);
- if (ret)
- debug("%s: Cannot autoset regulator VCC18_LCD\n", __func__);
- ret = regulator_autoset_by_name("vdd10_lcd_pwren_h", ®);
- if (ret) {
- debug("%s: Cannot autoset regulator vdd10_lcd_pwren_h\n",
- __func__);
- }
- ret = regulator_autoset_by_name("vdd10_lcd", ®);
- if (ret) {
- debug("%s: Cannot autoset regulator vdd10_lcd\n",
- __func__);
- }
- ret = regulator_autoset_by_name("VDD10_LCD", ®);
- if (ret) {
- debug("%s: Cannot autoset regulator VDD10_LCD\n",
- __func__);
- }
- ret = regulator_autoset_by_name("vcc33_lcd", ®);
- if (ret)
- debug("%s: Cannot autoset regulator vcc33_lcd\n", __func__);
-
/*
* Try all the ports until we find one that works. In practice this
* tries EDP first if available, then HDMI.
@@ -353,31 +367,12 @@ static int rk_vop_probe(struct udevice *dev)
return ret;
}
-static int rk_vop_bind(struct udevice *dev)
+int rk_vop_bind(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
- plat->size = 1920 * 1200 * 4;
+ plat->size = 4 * (CONFIG_VIDEO_ROCKCHIP_MAX_XRES *
+ CONFIG_VIDEO_ROCKCHIP_MAX_YRES);
return 0;
}
-
-static const struct video_ops rk_vop_ops = {
-};
-
-static const struct udevice_id rk_vop_ids[] = {
- { .compatible = "rockchip,rk3399-vop-big" },
- { .compatible = "rockchip,rk3399-vop-lit" },
- { .compatible = "rockchip,rk3288-vop" },
- { }
-};
-
-U_BOOT_DRIVER(rk_vop) = {
- .name = "rk_vop",
- .id = UCLASS_VIDEO,
- .of_match = rk_vop_ids,
- .ops = &rk_vop_ops,
- .bind = rk_vop_bind,
- .probe = rk_vop_probe,
- .priv_auto_alloc_size = sizeof(struct rk_vop_priv),
-};
diff --git a/drivers/video/rockchip/rk_vop.h b/drivers/video/rockchip/rk_vop.h
new file mode 100644
index 0000000..f65ac17
--- /dev/null
+++ b/drivers/video/rockchip/rk_vop.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __RK_VOP_H__
+#define __RK_VOP_H__
+
+#include <asm/arch/vop_rk3288.h>
+
+struct rk_vop_priv {
+ void *regs;
+};
+
+enum vop_features {
+ VOP_FEATURE_OUTPUT_10BIT = (1 << 0),
+};
+
+struct rkvop_driverdata {
+ /* configuration */
+ u32 features;
+ /* block-specific setters/getters */
+ void (*set_pin_polarity)(struct udevice *, enum vop_modes, u32);
+};
+
+int rk_vop_probe(struct udevice *dev);
+int rk_vop_bind(struct udevice *dev);
+void rk_vop_probe_regulators(struct udevice *dev,
+ const char * const *names, int cnt);
+
+#endif
--
1.9.1
More information about the U-Boot
mailing list