[U-Boot] [PATCH 02/16] icorem6: Add mmc_late_init

Jagan Teki jagan at openedev.com
Sat May 6 21:13:01 UTC 2017


From: Jagan Teki <jagan at amarulasolutions.com>

Let the runtime code can set the mmcdev and mmcroot based
on the devno using mmc_get_env_dev instead of defining
separately in build-time configs using mmc_late_init func.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Matteo Lisi <matteo.lisi at engicam.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 board/engicam/icorem6/icorem6.c | 22 ++++++++++++++++++++++
 include/configs/imx6qdl_icore.h |  2 --
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index f78f8c9..55fc77f 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -7,6 +7,7 @@
  */
 
 #include <common.h>
+#include <mmc.h>
 
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -205,12 +206,33 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#ifdef CONFIG_ENV_IS_IN_MMC
+static void mmc_late_init(void)
+{
+	char cmd[32];
+	char mmcblk[32];
+	u32 dev_no = mmc_get_env_dev();
+
+	setenv_ulong("mmcdev", dev_no);
+
+	/* Set mmcblk env */
+	sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
+	setenv("mmcroot", mmcblk);
+
+	sprintf(cmd, "mmc dev %d", dev_no);
+	run_command(cmd, 0);
+}
+#endif
+
 int board_late_init(void)
 {
 	switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
 			IMX6_BMODE_SHIFT) {
 	case IMX6_BMODE_SD:
 	case IMX6_BMODE_ESD:
+#ifdef CONFIG_ENV_IS_IN_MMC
+		mmc_late_init();
+#endif
 		setenv("modeboot", "mmcboot");
 		break;
 	case IMX6_BMODE_NAND:
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h
index b517e87..4bdba57 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6qdl_icore.h
@@ -45,9 +45,7 @@
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
-	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-- 
1.9.1



More information about the U-Boot mailing list