[U-Boot] [PATCH V2 4/4] mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT

Peng Fan peng.fan at nxp.com
Mon May 8 07:02:46 UTC 2017


CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT is not the correct method
to set I/O to 1.8. To boards that does not support vqmmc-supply,
use vs18_enable in fsl_esdhc_cfg. If regulator is supported,
use fixed 1.8V regulator for vqmmc-supply.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
Cc: York Sun <york.sun at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---

V2:
 None

 doc/README.fsl-esdhc         | 2 --
 drivers/mmc/fsl_esdhc.c      | 4 ----
 scripts/config_whitelist.txt | 1 -
 3 files changed, 7 deletions(-)

diff --git a/doc/README.fsl-esdhc b/doc/README.fsl-esdhc
index 7e71387..29cc661 100644
--- a/doc/README.fsl-esdhc
+++ b/doc/README.fsl-esdhc
@@ -20,5 +20,3 @@ Freescale esdhc-specific options
 	- CONFIG_SYS_FSL_ESDHC_BE
 		ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined
 		by ESDHC IP's endian mode or processor's endian mode.
-
-	- CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 8687083..b23b286 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -672,10 +672,6 @@ static int esdhc_init(struct mmc *mmc)
 	/* Set timout to the maximum value */
 	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
 
-#ifdef CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
-	esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT);
-#endif
-
 	if (priv->vs18_enable)
 		esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT);
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index ed349b9..255e22f 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3870,7 +3870,6 @@ CONFIG_SYS_FSL_ERRATUM_A_004934
 CONFIG_SYS_FSL_ESDHC_ADDR
 CONFIG_SYS_FSL_ESDHC_BE
 CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
 CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
 CONFIG_SYS_FSL_ESDHC_LE
 CONFIG_SYS_FSL_ESDHC_NUM
-- 
2.6.2



More information about the U-Boot mailing list