[U-Boot] [PATCHv2 2/5] ARM64: dts: poplar: add usb-ehci node

[Jorge Ramirez-Ortiz]

---
 arch/arm/dts/hi3798cv200-poplar.dts | 5 +++++
 arch/arm/dts/hi3798cv200.dtsi       | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts
index b914287..998472a 100644
--- a/arch/arm/dts/hi3798cv200-poplar.dts
+++ b/arch/arm/dts/hi3798cv200-poplar.dts
@@ -76,6 +76,10 @@
 	};
 };
 
+&usb_ehci {
+	status = "okay";
+};
+
 &gpio1 {
 	status = "okay";
 	gpio-line-names = "LS-GPIO-E",	"",
@@ -159,4 +163,5 @@
 	status = "okay";
 	label = "LS-UART0";
 };
+
 /* No optional LS-UART1 on Low Speed Expansion Connector. */
diff --git a/arch/arm/dts/hi3798cv200.dtsi b/arch/arm/dts/hi3798cv200.dtsi
index 75865f8..275282c 100644
--- a/arch/arm/dts/hi3798cv200.dtsi
+++ b/arch/arm/dts/hi3798cv200.dtsi
@@ -106,6 +106,12 @@
 			#reset-cells = <2>;
 		};
 
+		usb_ehci:ehci at 9890000 {
+			compatible = "generic-ehci";
+			reg = <0x9890000 0x100>;
+			status = "disabled";
+		};
+
 		uart0: serial at 8b00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x8b00000 0x1000>;
-- 
2.7.4