[U-Boot] [v2, 02/13] phy: marvell: cp110: add support for end point configuration

[Stefan Roese]

On 24.04.2017 17:45, igall at marvell.com wrote:
> From: Stefan Roese <sr at denx.de>
>
> The serdes was always configured in root complex mode.
> this patch add new entry in device tree (per serdes)
> which indicates whether the serdes is in end point mode.
> if so, it skips the root complex configuration.
>
> Signed-off-by: Haim Boot <hayim at marvell.com>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Signed-off-by: Igal Liberman <igall at marvell.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan