[U-Boot] [PATCH 3/7] arm: socfpga: Restructure FPGA driver in the preparation to support A10.
Marek Vasut
marex at denx.de
Mon May 8 10:16:30 UTC 2017
On 05/08/2017 06:39 AM, Chee, Tien Fong wrote:
> On Jum, 2017-05-05 at 13:13 +0200, Marek Vasut wrote:
>> On 05/05/2017 12:26 PM, tien.fong.chee at intel.com wrote:
>>>
>>> From: Tien Fong Chee <tien.fong.chee at intel.com>
>>>
>>> Move FPGA driver which is Gen5 specific code into Gen5 files.
>>> No functional change.
>> It's a driver, so it should stay in drivers/ . If you need to split
>> it,
>> split it in drivers/fpga/ and add Kconfig option(s)
>>
> I am confused here, all the FPGA drivers which i split into common and
> platform specific are still in the drivers/fpga/. Could you explain
> more? Thanks.
The driver code should be in drivers/fpga/ , so unless there's a good
reason, don't move any of it into arch/arm/
>>>
>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>>> ---
>>> arch/arm/mach-socfpga/Makefile | 2 +-
>>> arch/arm/mach-socfpga/include/mach/fpga_manager.h | 65 +----
>>> .../mach/{fpga_manager.h => fpga_manager_gen5.h} | 69 +++---
>>> drivers/Makefile | 1 +
>>> drivers/fpga/Makefile | 1 +
>>> drivers/fpga/socfpga.c | 267 +-------
>>> ------------
>>> drivers/fpga/{socfpga.c => socfpga_gen5.c} | 29 +--
>>> 7 files changed, 48 insertions(+), 386 deletions(-)
>>> copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h =>
>>> fpga_manager_gen5.h} (57%)
>>> copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (92%)
>>>
>>> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-
>>> socfpga/Makefile
>>> index 41b779c..286bfef 100644
>>> --- a/arch/arm/mach-socfpga/Makefile
>>> +++ b/arch/arm/mach-socfpga/Makefile
>>> @@ -9,7 +9,6 @@
>>>
>>> obj-y += board.o
>>> obj-y += clock_manager.o
>>> -obj-y += fpga_manager.o
>>> obj-y += misc.o
>>> obj-y += reset_manager.o
>>> obj-y += timer.o
>>> @@ -21,6 +20,7 @@ obj-y += reset_manager_gen5.o
>>> obj-y += scan_manager.o
>>> obj-y += system_manager_gen5.o
>>> obj-y += wrap_pll_config.o
>>> +obj-y += fpga_manager.o
>>> endif
>>>
>>> ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
>>> diff --git a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> b/arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> index a077e22..69d8613 100644
>>> --- a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> +++ b/arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> @@ -1,5 +1,5 @@
>>> /*
>>> - * Copyright (C) 2012 Altera Corporation <www.altera.com>
>>> + * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
>>> * All rights reserved.
>>> *
>>> * SPDX-License-Identifier: BSD-3-Clause
>>> @@ -10,58 +10,9 @@
>>>
>>> #include <altera.h>
>>>
>>> -struct socfpga_fpga_manager {
>>> - /* FPGA Manager Module */
>>> - u32 stat; /* 0x00 */
>>> - u32 ctrl;
>>> - u32 dclkcnt;
>>> - u32 dclkstat;
>>> - u32 gpo; /* 0x10 */
>>> - u32 gpi;
>>> - u32 misci; /* 0x18 */
>>> - u32 _pad_0x1c_0x82c[517];
>>> -
>>> - /* Configuration Monitor (MON) Registers */
>>> - u32 gpio_inten; /* 0x830 */
>>> - u32 gpio_intmask;
>>> - u32 gpio_inttype_level;
>>> - u32 gpio_int_polarity;
>>> - u32 gpio_intstatus; /* 0x840 */
>>> - u32 gpio_raw_intstatus;
>>> - u32 _pad_0x848;
>>> - u32 gpio_porta_eoi;
>>> - u32 gpio_ext_porta; /* 0x850 */
>>> - u32 _pad_0x854_0x85c[3];
>>> - u32 gpio_1s_sync; /* 0x860 */
>>> - u32 _pad_0x864_0x868[2];
>>> - u32 gpio_ver_id_code;
>>> - u32 gpio_config_reg2; /* 0x870 */
>>> - u32 gpio_config_reg1;
>>> -};
>>> -
>>> -#define FPGAMGRREGS_STAT_MODE_MASK 0x7
>>> -#define FPGAMGRREGS_STAT_MSEL_MASK 0xf8
>>> -#define FPGAMGRREGS_STAT_MSEL_LSB 3
>>> -
>>> -#define FPGAMGRREGS_CTRL_CFGWDTH_MASK 0x200
>>> -#define FPGAMGRREGS_CTRL_AXICFGEN_MASK 0x100
>>> -#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK 0x4
>>> -#define FPGAMGRREGS_CTRL_NCE_MASK 0x2
>>> -#define FPGAMGRREGS_CTRL_EN_MASK 0x1
>>> -#define FPGAMGRREGS_CTRL_CDRATIO_LSB 6
>>> -
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK 0x8
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK 0x4
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK 0x2
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK 0x1
>>> -
>>> -/* FPGA Mode */
>>> -#define FPGAMGRREGS_MODE_FPGAOFF 0x0
>>> -#define FPGAMGRREGS_MODE_RESETPHASE 0x1
>>> -#define FPGAMGRREGS_MODE_CFGPHASE 0x2
>>> -#define FPGAMGRREGS_MODE_INITPHASE 0x3
>>> -#define FPGAMGRREGS_MODE_USERMODE 0x4
>>> -#define FPGAMGRREGS_MODE_UNKNOWN 0x5
>>> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>>> +#include <asm/arch/fpga_manager_gen5.h>
>>> +#endif
>>>
>>> /* FPGA CD Ratio Value */
>>> #define CDRATIO_x1 0x0
>>> @@ -74,4 +25,12 @@ int fpgamgr_test_fpga_ready(void);
>>> int fpgamgr_poll_fpga_ready(void);
>>> int fpgamgr_get_mode(void);
>>>
>>> +#define FPGA_TIMEOUT_CNT 0x1000000
>>> +
>>> +#ifndef __ASSEMBLY__
>>> +
>>> +/* Common prototypes */
>>> +int fpgamgr_dclkcnt_set(unsigned long cnt);
>>> +
>>> +#endif /* __ASSEMBLY__ */
>>> #endif /* _FPGA_MANAGER_H_ */
>>> diff --git a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> b/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
>>> similarity index 57%
>>> copy from arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> copy to arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
>>> index a077e22..2de7a11 100644
>>> --- a/arch/arm/mach-socfpga/include/mach/fpga_manager.h
>>> +++ b/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
>>> @@ -1,14 +1,38 @@
>>> /*
>>> - * Copyright (C) 2012 Altera Corporation <www.altera.com>
>>> + * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
>>> * All rights reserved.
>>> *
>>> * SPDX-License-Identifier: BSD-3-Clause
>>> */
>>>
>>> -#ifndef _FPGA_MANAGER_H_
>>> -#define _FPGA_MANAGER_H_
>>> +#ifndef _FPGA_MANAGER_GEN5_H_
>>> +#define _FPGA_MANAGER_GEN5_H_
>>>
>>> -#include <altera.h>
>>> +#define FPGAMGRREGS_STAT_MODE_MASK 0x7
>>> +#define FPGAMGRREGS_STAT_MSEL_MASK 0xf8
>>> +#define FPGAMGRREGS_STAT_MSEL_LSB 3
>>> +
>>> +#define FPGAMGRREGS_CTRL_CFGWDTH_MASK BIT(9)
>>> +#define FPGAMGRREGS_CTRL_AXICFGEN_MASK BIT(8)
>>> +#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK BIT(2)
>>> +#define FPGAMGRREGS_CTRL_NCE_MASK BIT(1)
>>> +#define FPGAMGRREGS_CTRL_EN_MASK BIT(0)
>>> +#define FPGAMGRREGS_CTRL_CDRATIO_LSB 6
>>> +
>>> +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK BIT(3)
>>> +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK BIT(2)
>>> +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK BIT(1)
>>> +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK BIT(0)
>>> +
>>> +/* FPGA Mode */
>>> +#define FPGAMGRREGS_MODE_FPGAOFF 0x0
>>> +#define FPGAMGRREGS_MODE_RESETPHASE 0x1
>>> +#define FPGAMGRREGS_MODE_CFGPHASE 0x2
>>> +#define FPGAMGRREGS_MODE_INITPHASE 0x3
>>> +#define FPGAMGRREGS_MODE_USERMODE 0x4
>>> +#define FPGAMGRREGS_MODE_UNKNOWN 0x5
>>> +
>>> +#ifndef __ASSEMBLY__
>>>
>>> struct socfpga_fpga_manager {
>>> /* FPGA Manager Module */
>>> @@ -39,39 +63,6 @@ struct socfpga_fpga_manager {
>>> u32 gpio_config_reg1;
>>> };
>>>
>>> -#define FPGAMGRREGS_STAT_MODE_MASK 0x7
>>> -#define FPGAMGRREGS_STAT_MSEL_MASK 0xf8
>>> -#define FPGAMGRREGS_STAT_MSEL_LSB 3
>>> -
>>> -#define FPGAMGRREGS_CTRL_CFGWDTH_MASK 0x200
>>> -#define FPGAMGRREGS_CTRL_AXICFGEN_MASK 0x100
>>> -#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK 0x4
>>> -#define FPGAMGRREGS_CTRL_NCE_MASK 0x2
>>> -#define FPGAMGRREGS_CTRL_EN_MASK 0x1
>>> -#define FPGAMGRREGS_CTRL_CDRATIO_LSB 6
>>> -
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK 0x8
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK 0x4
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK 0x2
>>> -#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK 0x1
>>> -
>>> -/* FPGA Mode */
>>> -#define FPGAMGRREGS_MODE_FPGAOFF 0x0
>>> -#define FPGAMGRREGS_MODE_RESETPHASE 0x1
>>> -#define FPGAMGRREGS_MODE_CFGPHASE 0x2
>>> -#define FPGAMGRREGS_MODE_INITPHASE 0x3
>>> -#define FPGAMGRREGS_MODE_USERMODE 0x4
>>> -#define FPGAMGRREGS_MODE_UNKNOWN 0x5
>>> -
>>> -/* FPGA CD Ratio Value */
>>> -#define CDRATIO_x1 0x0
>>> -#define CDRATIO_x2 0x1
>>> -#define CDRATIO_x4 0x2
>>> -#define CDRATIO_x8 0x3
>>> -
>>> -/* SoCFPGA support functions */
>>> -int fpgamgr_test_fpga_ready(void);
>>> -int fpgamgr_poll_fpga_ready(void);
>>> -int fpgamgr_get_mode(void);
>>> +#endif /* __ASSEMBLY__ */
>>>
>>> -#endif /* _FPGA_MANAGER_H_ */
>>> +#endif /* _FPGA_MANAGER_GEN5_H_ */
>>> diff --git a/drivers/Makefile b/drivers/Makefile
>>> index 4a4b237..b4a2230 100644
>>> --- a/drivers/Makefile
>>> +++ b/drivers/Makefile
>>> @@ -47,6 +47,7 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
>>> obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
>>> obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
>>> obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
>>> +obj-$(CONFIG_FPGA) += fpga/
>>> endif
>>>
>>> ifdef CONFIG_TPL_BUILD
>>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
>>> index 84e7605..649b6d1 100644
>>> --- a/drivers/fpga/Makefile
>>> +++ b/drivers/fpga/Makefile
>>> @@ -19,4 +19,5 @@ obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
>>> obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
>>> obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
>>> obj-$(CONFIG_FPGA_STRATIX_V) += stratixv.o
>>> +obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += socfpga_gen5.o
>>> endif
>>> diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
>>> index f1b2f2c..30ebee8 100644
>>> --- a/drivers/fpga/socfpga.c
>>> +++ b/drivers/fpga/socfpga.c
>>> @@ -1,5 +1,5 @@
>>> /*
>>> - * Copyright (C) 2012 Altera Corporation <www.altera.com>
>>> + * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
>>> * All rights reserved.
>>> *
>>> * SPDX-License-Identifier: BSD-3-Clause
>>> @@ -14,23 +14,10 @@
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>>
>>> -/* Timeout count */
>>> -#define FPGA_TIMEOUT_CNT 0x1000000
>>> -
>>> static struct socfpga_fpga_manager *fpgamgr_regs =
>>> (struct socfpga_fpga_manager
>>> *)SOCFPGA_FPGAMGRREGS_ADDRESS;
>>> -static struct socfpga_system_manager *sysmgr_regs =
>>> - (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
>>> -
>>> -/* Set CD ratio */
>>> -static void fpgamgr_set_cd_ratio(unsigned long ratio)
>>> -{
>>> - clrsetbits_le32(&fpgamgr_regs->ctrl,
>>> - 0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB,
>>> - (ratio & 0x3) <<
>>> FPGAMGRREGS_CTRL_CDRATIO_LSB);
>>> -}
>>>
>>> -static int fpgamgr_dclkcnt_set(unsigned long cnt)
>>> +int fpgamgr_dclkcnt_set(unsigned long cnt)
>>> {
>>> unsigned long i;
>>>
>>> @@ -52,253 +39,3 @@ static int fpgamgr_dclkcnt_set(unsigned long
>>> cnt)
>>>
>>> return -ETIMEDOUT;
>>> }
>>> -
>>> -/* Start the FPGA programming by initialize the FPGA Manager */
>>> -static int fpgamgr_program_init(void)
>>> -{
>>> - unsigned long msel, i;
>>> -
>>> - /* Get the MSEL value */
>>> - msel = readl(&fpgamgr_regs->stat);
>>> - msel &= FPGAMGRREGS_STAT_MSEL_MASK;
>>> - msel >>= FPGAMGRREGS_STAT_MSEL_LSB;
>>> -
>>> - /*
>>> - * Set the cfg width
>>> - * If MSEL[3] = 1, cfg width = 32 bit
>>> - */
>>> - if (msel & 0x8) {
>>> - setbits_le32(&fpgamgr_regs->ctrl,
>>> - FPGAMGRREGS_CTRL_CFGWDTH_MASK);
>>> -
>>> - /* To determine the CD ratio */
>>> - /* MSEL[1:0] = 0, CD Ratio = 1 */
>>> - if ((msel & 0x3) == 0x0)
>>> - fpgamgr_set_cd_ratio(CDRATIO_x1);
>>> - /* MSEL[1:0] = 1, CD Ratio = 4 */
>>> - else if ((msel & 0x3) == 0x1)
>>> - fpgamgr_set_cd_ratio(CDRATIO_x4);
>>> - /* MSEL[1:0] = 2, CD Ratio = 8 */
>>> - else if ((msel & 0x3) == 0x2)
>>> - fpgamgr_set_cd_ratio(CDRATIO_x8);
>>> -
>>> - } else { /* MSEL[3] = 0 */
>>> - clrbits_le32(&fpgamgr_regs->ctrl,
>>> - FPGAMGRREGS_CTRL_CFGWDTH_MASK);
>>> -
>>> - /* To determine the CD ratio */
>>> - /* MSEL[1:0] = 0, CD Ratio = 1 */
>>> - if ((msel & 0x3) == 0x0)
>>> - fpgamgr_set_cd_ratio(CDRATIO_x1);
>>> - /* MSEL[1:0] = 1, CD Ratio = 2 */
>>> - else if ((msel & 0x3) == 0x1)
>>> - fpgamgr_set_cd_ratio(CDRATIO_x2);
>>> - /* MSEL[1:0] = 2, CD Ratio = 4 */
>>> - else if ((msel & 0x3) == 0x2)
>>> - fpgamgr_set_cd_ratio(CDRATIO_x4);
>>> - }
>>> -
>>> - /* To enable FPGA Manager configuration */
>>> - clrbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_NCE_MASK);
>>> -
>>> - /* To enable FPGA Manager drive over configuration line */
>>> - setbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_EN_MASK);
>>> -
>>> - /* Put FPGA into reset phase */
>>> - setbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
>>> -
>>> - /* (1) wait until FPGA enter reset phase */
>>> - for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
>>> - if (fpgamgr_get_mode() ==
>>> FPGAMGRREGS_MODE_RESETPHASE)
>>> - break;
>>> - }
>>> -
>>> - /* If not in reset state, return error */
>>> - if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) {
>>> - puts("FPGA: Could not reset\n");
>>> - return -1;
>>> - }
>>> -
>>> - /* Release FPGA from reset phase */
>>> - clrbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
>>> -
>>> - /* (2) wait until FPGA enter configuration phase */
>>> - for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
>>> - if (fpgamgr_get_mode() ==
>>> FPGAMGRREGS_MODE_CFGPHASE)
>>> - break;
>>> - }
>>> -
>>> - /* If not in configuration state, return error */
>>> - if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) {
>>> - puts("FPGA: Could not configure\n");
>>> - return -2;
>>> - }
>>> -
>>> - /* Clear all interrupts in CB Monitor */
>>> - writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi);
>>> -
>>> - /* Enable AXI configuration */
>>> - setbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_AXICFGEN_MASK);
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -/* Write the RBF data to FPGA Manager */
>>> -static void fpgamgr_program_write(const void *rbf_data, unsigned
>>> long rbf_size)
>>> -{
>>> - uint32_t src = (uint32_t)rbf_data;
>>> - uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS;
>>> -
>>> - /* Number of loops for 32-byte long copying. */
>>> - uint32_t loops32 = rbf_size / 32;
>>> - /* Number of loops for 4-byte long copying + trailing
>>> bytes */
>>> - uint32_t loops4 = DIV_ROUND_UP(rbf_size % 32, 4);
>>> -
>>> - asm volatile(
>>> - "1: ldmia %0!, {r0-r7}\n"
>>> - " stmia %1!, {r0-r7}\n"
>>> - " sub %1, #32\n"
>>> - " subs %2, #1\n"
>>> - " bne 1b\n"
>>> - " cmp %3, #0\n"
>>> - " beq 3f\n"
>>> - "2: ldr %2, [%0], #4\n
>>> "
>>> - " str %2, [%1]\n"
>>> - " subs %3, #1\n"
>>> - " bne 2b\n"
>>> - "3: nop\n"
>>> - : "+r"(src), "+r"(dst), "+r"(loops32),
>>> "+r"(loops4) :
>>> - : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
>>> "cc");
>>> -}
>>> -
>>> -/* Ensure the FPGA entering config done */
>>> -static int fpgamgr_program_poll_cd(void)
>>> -{
>>> - const uint32_t mask =
>>> FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK |
>>> - FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MA
>>> SK;
>>> - unsigned long reg, i;
>>> -
>>> - /* (3) wait until full config done */
>>> - for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
>>> - reg = readl(&fpgamgr_regs->gpio_ext_porta);
>>> -
>>> - /* Config error */
>>> - if (!(reg & mask)) {
>>> - printf("FPGA: Configuration error.\n");
>>> - return -3;
>>> - }
>>> -
>>> - /* Config done without error */
>>> - if (reg & mask)
>>> - break;
>>> - }
>>> -
>>> - /* Timeout happened, return error */
>>> - if (i == FPGA_TIMEOUT_CNT) {
>>> - printf("FPGA: Timeout waiting for program.\n");
>>> - return -4;
>>> - }
>>> -
>>> - /* Disable AXI configuration */
>>> - clrbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_AXICFGEN_MASK);
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -/* Ensure the FPGA entering init phase */
>>> -static int fpgamgr_program_poll_initphase(void)
>>> -{
>>> - unsigned long i;
>>> -
>>> - /* Additional clocks for the CB to enter initialization
>>> phase */
>>> - if (fpgamgr_dclkcnt_set(0x4))
>>> - return -5;
>>> -
>>> - /* (4) wait until FPGA enter init phase or user mode */
>>> - for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
>>> - if (fpgamgr_get_mode() ==
>>> FPGAMGRREGS_MODE_INITPHASE)
>>> - break;
>>> - if (fpgamgr_get_mode() ==
>>> FPGAMGRREGS_MODE_USERMODE)
>>> - break;
>>> - }
>>> -
>>> - /* If not in configuration state, return error */
>>> - if (i == FPGA_TIMEOUT_CNT)
>>> - return -6;
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -/* Ensure the FPGA entering user mode */
>>> -static int fpgamgr_program_poll_usermode(void)
>>> -{
>>> - unsigned long i;
>>> -
>>> - /* Additional clocks for the CB to exit initialization
>>> phase */
>>> - if (fpgamgr_dclkcnt_set(0x5000))
>>> - return -7;
>>> -
>>> - /* (5) wait until FPGA enter user mode */
>>> - for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
>>> - if (fpgamgr_get_mode() ==
>>> FPGAMGRREGS_MODE_USERMODE)
>>> - break;
>>> - }
>>> - /* If not in configuration state, return error */
>>> - if (i == FPGA_TIMEOUT_CNT)
>>> - return -8;
>>> -
>>> - /* To release FPGA Manager drive over configuration line
>>> */
>>> - clrbits_le32(&fpgamgr_regs->ctrl,
>>> FPGAMGRREGS_CTRL_EN_MASK);
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -/*
>>> - * FPGA Manager to program the FPGA. This is the interface used by
>>> FPGA driver.
>>> - * Return 0 for sucess, non-zero for error.
>>> - */
>>> -int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t
>>> rbf_size)
>>> -{
>>> - unsigned long status;
>>> -
>>> - if ((uint32_t)rbf_data & 0x3) {
>>> - puts("FPGA: Unaligned data, realign to 32bit
>>> boundary.\n");
>>> - return -EINVAL;
>>> - }
>>> -
>>> - /* Prior programming the FPGA, all bridges need to be shut
>>> off */
>>> -
>>> - /* Disable all signals from hps peripheral controller to
>>> fpga */
>>> - writel(0, &sysmgr_regs->fpgaintfgrp_module);
>>> -
>>> - /* Disable all signals from FPGA to HPS SDRAM */
>>> -#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080
>>> - writel(0, SOCFPGA_SDR_ADDRESS +
>>> SDR_CTRLGRP_FPGAPORTRST_ADDRESS);
>>> -
>>> - /* Disable all axi bridge (hps2fpga, lwhps2fpga &
>>> fpga2hps) */
>>> - socfpga_bridges_reset(1);
>>> -
>>> - /* Unmap the bridges from NIC-301 */
>>> - writel(0x1, SOCFPGA_L3REGS_ADDRESS);
>>> -
>>> - /* Initialize the FPGA Manager */
>>> - status = fpgamgr_program_init();
>>> - if (status)
>>> - return status;
>>> -
>>> - /* Write the RBF data to FPGA Manager */
>>> - fpgamgr_program_write(rbf_data, rbf_size);
>>> -
>>> - /* Ensure the FPGA entering config done */
>>> - status = fpgamgr_program_poll_cd();
>>> - if (status)
>>> - return status;
>>> -
>>> - /* Ensure the FPGA entering init phase */
>>> - status = fpgamgr_program_poll_initphase();
>>> - if (status)
>>> - return status;
>>> -
>>> - /* Ensure the FPGA entering user mode */
>>> - return fpgamgr_program_poll_usermode();
>>> -}
>>> diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga_gen5.c
>>> similarity index 92%
>>> copy from drivers/fpga/socfpga.c
>>> copy to drivers/fpga/socfpga_gen5.c
>>> index f1b2f2c..6992d83 100644
>>> --- a/drivers/fpga/socfpga.c
>>> +++ b/drivers/fpga/socfpga_gen5.c
>>> @@ -1,5 +1,5 @@
>>> /*
>>> - * Copyright (C) 2012 Altera Corporation <www.altera.com>
>>> + * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
>>> * All rights reserved.
>>> *
>>> * SPDX-License-Identifier: BSD-3-Clause
>>> @@ -14,9 +14,6 @@
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>>
>>> -/* Timeout count */
>>> -#define FPGA_TIMEOUT_CNT 0x1000000
>>> -
>>> static struct socfpga_fpga_manager *fpgamgr_regs =
>>> (struct socfpga_fpga_manager
>>> *)SOCFPGA_FPGAMGRREGS_ADDRESS;
>>> static struct socfpga_system_manager *sysmgr_regs =
>>> @@ -30,29 +27,6 @@ static void fpgamgr_set_cd_ratio(unsigned long
>>> ratio)
>>> (ratio & 0x3) <<
>>> FPGAMGRREGS_CTRL_CDRATIO_LSB);
>>> }
>>>
>>> -static int fpgamgr_dclkcnt_set(unsigned long cnt)
>>> -{
>>> - unsigned long i;
>>> -
>>> - /* Clear any existing done status */
>>> - if (readl(&fpgamgr_regs->dclkstat))
>>> - writel(0x1, &fpgamgr_regs->dclkstat);
>>> -
>>> - /* Write the dclkcnt */
>>> - writel(cnt, &fpgamgr_regs->dclkcnt);
>>> -
>>> - /* Wait till the dclkcnt done */
>>> - for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
>>> - if (!readl(&fpgamgr_regs->dclkstat))
>>> - continue;
>>> -
>>> - writel(0x1, &fpgamgr_regs->dclkstat);
>>> - return 0;
>>> - }
>>> -
>>> - return -ETIMEDOUT;
>>> -}
>>> -
>>> /* Start the FPGA programming by initialize the FPGA Manager */
>>> static int fpgamgr_program_init(void)
>>> {
>>> @@ -267,7 +241,6 @@ int socfpga_load(Altera_desc *desc, const void
>>> *rbf_data, size_t rbf_size)
>>> }
>>>
>>> /* Prior programming the FPGA, all bridges need to be shut
>>> off */
>>> -
>>> /* Disable all signals from hps peripheral controller to
>>> fpga */
>>> writel(0, &sysmgr_regs->fpgaintfgrp_module);
>>>
>>>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list