[U-Boot] [PATCH 07/17] gw_ventana: Fix unused variable warnings

[Tom Rini]

The variable nfc_pads is only referenced when CONFIG_CMD_NAND is set,
move the existing guard and drop a now redundant comment.  The variable
gwproto_gpio_pads is never referenced, remove it.

Cc: Tim Harvey <tharvey at gateworks.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 board/gateworks/gw_ventana/common.c     | 27 ---------------------------
 board/gateworks/gw_ventana/gw_ventana.c |  3 +--
 2 files changed, 1 insertion(+), 29 deletions(-)

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index d27bd57648ca..186eb1804813 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -180,33 +180,6 @@ void setup_ventana_i2c(void)
 /*
  * Baseboard specific GPIO
  */
-
-/* prototype */
-static iomux_v3_cfg_t const gwproto_gpio_pads[] = {
-	/* RS232_EN# */
-	IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
-	/* PANLEDG# */
-	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
-	/* PANLEDR# */
-	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
-	/* LOCLED# */
-	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
-	/* RS485_EN */
-	IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
-	/* IOEXP_PWREN# */
-	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
-	/* IOEXP_IRQ# */
-	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
-	/* VID_EN */
-	IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
-	/* DIOI2C_DIS# */
-	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
-	/* PCICK_SSON */
-	IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | DIO_PAD_CFG),
-	/* PCI_RST# */
-	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
-};
-
 static iomux_v3_cfg_t const gw51xx_gpio_pads[] = {
 	/* PANLEDG# */
 	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index dc8cd883e904..c4c2d2353207 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -76,7 +76,7 @@ static iomux_v3_cfg_t const enet_pads[] = {
 	IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG),
 };
 
-/* NAND */
+#ifdef CONFIG_CMD_NAND
 static iomux_v3_cfg_t const nfc_pads[] = {
 	IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
@@ -95,7 +95,6 @@ static iomux_v3_cfg_t const nfc_pads[] = {
 	IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
-#ifdef CONFIG_CMD_NAND
 static void setup_gpmi_nand(void)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-- 
1.9.1