[U-Boot] [PATCH 05/17] mx6slevk: Fix unused variable warning

[Stefano Babic]

On 09/05/2017 04:14, Tom Rini wrote:
> The variable usdhc1_pads is only referenced during SPL builds, add a
> guard.
> 
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Signed-off-by: Tom Rini <trini at konsulko.com>
> ---
>  board/freescale/mx6slevk/mx6slevk.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
> index d49543315b92..228514b106a8 100644
> --- a/board/freescale/mx6slevk/mx6slevk.c
> +++ b/board/freescale/mx6slevk/mx6slevk.c
> @@ -66,6 +66,7 @@ static iomux_v3_cfg_t const uart1_pads[] = {
>  	MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
>  };
>  
> +#ifdef CONFIG_SPL_BUILD
>  static iomux_v3_cfg_t const usdhc1_pads[] = {
>  	/* 8 bit SD */
>  	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> @@ -106,6 +107,7 @@ static iomux_v3_cfg_t const usdhc3_pads[] = {
>  	/*CD pin*/
>  	MX6_PAD_REF_CLK_32K__GPIO_3_22 | MUX_PAD_CTRL(NO_PAD_CTRL),
>  };
> +#endif
>  
>  static iomux_v3_cfg_t const fec_pads[] = {
>  	MX6_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> 

Reviewed-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================