[U-Boot] [PATCH v2 03/71] dm: core: Add livetree definitions
Simon Glass
sjg at chromium.org
Wed May 10 14:20:42 UTC 2017
Add a Kconfig option to enable a live device tree, built at run time from
the flat tree. Also add structure definitions and a root node.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
dts/Kconfig | 11 ++++
include/asm-generic/global_data.h | 3 ++
include/dm/of.h | 103 ++++++++++++++++++++++++++++++++++++++
3 files changed, 117 insertions(+)
create mode 100644 include/dm/of.h
diff --git a/dts/Kconfig b/dts/Kconfig
index 6fe7a5bc08..4d8e476831 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -32,6 +32,17 @@ config SPL_OF_CONTROL
which is not enough to support device tree. Enable this option to
allow such boards to be supported by U-Boot SPL.
+config OF_LIVE
+ bool "Enable use of a live tree"
+ depends on OF_CONTROL
+ help
+ Normally U-Boot uses a flat device tree which saves space and
+ avoids the need to unpack the tree before use. However a flat
+ tree does not support modifcation from within U-Boot since it
+ can invalidate driver-model device tree offsets. This option
+ enables a live tree which is available after relocation,
+ and can be adjusted as needed.
+
choice
prompt "Provider of DTB for DT control"
depends on OF_CONTROL
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 1a77c982fa..28c6cab831 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -72,6 +72,9 @@ typedef struct global_data {
const void *fdt_blob; /* Our device tree, NULL if none */
void *new_fdt; /* Relocated FDT */
unsigned long fdt_size; /* Space reserved for relocated FDT */
+#ifdef CONFIG_OF_LIVE
+ struct device_node *of_root;
+#endif
struct jt_funcs *jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
#ifdef CONFIG_TRACE
diff --git a/include/dm/of.h b/include/dm/of.h
new file mode 100644
index 0000000000..102565018e
--- /dev/null
+++ b/include/dm/of.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2017 Google, Inc
+ * Written by Simon Glass <sjg at chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DM_OF_H
+#define _DM_OF_H
+
+/* integer value within a device tree property which references another node */
+typedef u32 phandle;
+
+/**
+ * struct property: Device tree property
+ *
+ * @name: Property name
+ * @length: Length of property in bytes
+ * @value: Pointer to property value
+ * @next: Pointer to next property, or NULL if none
+ */
+struct property {
+ char *name;
+ int length;
+ void *value;
+ struct property *next;
+};
+
+/**
+ * struct device_node: Device tree node
+ *
+ * @name: Node name
+ * @type: Node type (value of device_type property) or "<NULL>" if none
+ * @phandle: Phandle value of this none, or 0 if none
+ * @full_name: Full path to node, e.g. "/bus at 1/spi at 1100"
+ * @properties: Pointer to head of list of properties, or NULL if none
+ * @parent: Pointer to parent node, or NULL if this is the root node
+ * @child: Pointer to head of child node list, or NULL if no children
+ * @sibling: Pointer to the next sibling node, or NULL if this is the last
+ */
+struct device_node {
+ const char *name;
+ const char *type;
+ phandle phandle;
+ const char *full_name;
+
+ struct property *properties;
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+};
+
+#define OF_MAX_PHANDLE_ARGS 16
+
+/**
+ * struct of_phandle_args - structure to hold phandle and arguments
+ *
+ * This is used when decoding a phandle in a device tree property. Typically
+ * these look like this:
+ *
+ * wibble {
+ * phandle = <5>;
+ * };
+ *
+ * ...
+ * some-prop = <&wibble 1 2 3>
+ *
+ * Here &node is the phandle of the node 'wibble', i.e. 5. There are three
+ * arguments: 1, 2, 3.
+ *
+ * So when decoding the phandle in some-prop, np will point to wibble,
+ * args_count will be 3 and the three arguments will be in args.
+ *
+ * @np: Node that the phandle refers to
+ * @args_count: Number of arguments
+ * @args: Argument values
+ */
+struct of_phandle_args {
+ struct device_node *np;
+ int args_count;
+ uint32_t args[OF_MAX_PHANDLE_ARGS];
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * of_live_active() - check if livetree is active
+ *
+ * @returns true if livetree is active, false it not
+ */
+#ifdef CONFIG_OF_LIVE
+static inline bool of_live_active(void)
+{
+ return gd->of_root != NULL;
+}
+#else
+static inline bool of_live_active(void)
+{
+ return false;
+}
+#endif
+
+#endif
--
2.13.0.rc2.291.g57267f2277-goog
More information about the U-Boot
mailing list