[U-Boot] [PATCH v5 00/14] STiH410-B2260: add reset, usb and fastboot support

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>


This series adds :
	_ update existing sdhci driver to use reset framework
	_ add usb phy driver
	_ add ehci support
	_ add ohci support
	_ add xhci support
	_ add fastboot support

With all this feature enable, it's now possible to 
	_ boot on usb mass storage device
	_ boot from kernel image and dtb previously loaded using tftp
	_ update mmc partiton using fastboot

v5:     _ extend generic ehci with phy
	_ extend generic ohci with clock, reset and phy
	_ remove specifi STi ehci and ohci drivers and use generic ohci/ehci
          ones
	_ update stih410-b2260 device tree to use ehci and ohci generic
	  drivers

v4:     _ use PHY uclass currently available on dm-next branch,
	  update sti ehci, ohci and xhci drivers to use new PHY uclass.

v3:	_ remove reset driver (already applied on u-boot-dm tree by Simon
	  Glass)
	_ patch 4: add new USB PHY uclass requested by Simon Glass
	_ patch 5: convert STi usb phy driver to new USB PHY uclass
	_ patch 6/7: update echi/ohci drivers to use USB PHY uclass
	_ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti driver binded
	  dwc3-sti (STi glue driver) which was not correct. Now we respect the device 
	  tree hierarchy, ie the STi dwc3 glue driver is first probed, then bind the
	  xhci-sti driver.
	
v2:	_ add Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com> in patches 2,3 and 4
	_ fix remarks done by Marek Vasut :
		_ patch 5 : replace bitfield_replace() by clrsetbits_le32()
		_ patch 6 : update error messages and add remove callback
		_ patch 8 : put board specific defines in a separate patch
		_ patch 7: use setbits_le32() instead of read, modify, write
		  sequence and add missing parenthesis
		_ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21
		  in patch 14
		  

Patrice Chotard (14):
  mmc: sti_sdhci: Rework sti_mmc_core_config()
  ARM: dts: stih410-family: Add missing reset_names for mmc1 node
  mmc: sti_sdhci: Use reset framework
  usb: phy: Add STi USB2 PHY
  usb: xhci: Add STi xhci support
  usb: dwc3: Add dwc3 glue driver support for STi
  board: STiH410-B2260: add OHCI and XHCI related defines
  board: STiH410-B2260: add fastboot support
  STiH410-B2260: enable USB Host Networking
  usb: extend generic EHCI with PHY
  ARM: DTS: STiH410: rework ehci nodes
  usb: extend generic OHCI with clock, reset and phy
  ARM: DTS: STiH410: rework ohci nodes
  STiH410-B2260: enable USB, fastboot, reset related flags

 arch/arm/dts/stih407-family.dtsi                 |   1 +
 arch/arm/dts/stih410.dtsi                        |  16 +-
 arch/arm/include/asm/arch-stih410/sys_proto.h    |  11 +
 board/st/stih410-b2260/board.c                   |  44 ++++
 configs/stih410-b2260_defconfig                  |  38 +++-
 doc/device-tree-bindings/phy/phy-stih407-usb.txt |  24 ++
 doc/device-tree-bindings/usb/dwc3-st.txt         |  60 +++++
 drivers/mmc/sti_sdhci.c                          |  60 +++--
 drivers/phy/Kconfig                              |   8 +
 drivers/phy/Makefile                             |   1 +
 drivers/phy/sti_usb_phy.c                        | 181 +++++++++++++++
 drivers/usb/host/Kconfig                         |   8 +
 drivers/usb/host/Makefile                        |   1 +
 drivers/usb/host/dwc3-sti-glue.c                 | 278 +++++++++++++++++++++++
 drivers/usb/host/ehci-generic.c                  |  13 ++
 drivers/usb/host/ohci-generic.c                  |  48 +++-
 drivers/usb/host/xhci-sti.c                      | 128 +++++++++++
 include/configs/stih410-b2260.h                  |  16 ++
 include/dwc3-sti-glue.h                          |  43 ++++
 19 files changed, 939 insertions(+), 40 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h
 create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt
 create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt
 create mode 100644 drivers/phy/sti_usb_phy.c
 create mode 100644 drivers/usb/host/dwc3-sti-glue.c
 create mode 100644 drivers/usb/host/xhci-sti.c
 create mode 100644 include/dwc3-sti-glue.h

-- 
1.9.1