[U-Boot] [PATCH v5 11/14] ARM: DTS: STiH410: rework ehci nodes
patrice.chotard at st.com
patrice.chotard at st.com
Wed May 10 16:09:56 UTC 2017
From: Patrice Chotard <patrice.chotard at st.com>
Update the compatible string in order to use ehci-generic
driver instead of a STi specific one
Reverse the order of resets, due to the fact that softreset
must be deasserted first.
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
v5: _ update compatible and reset order to fit with ehci_generic driver
arch/arm/dts/stih410.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi
index f118a9e..9997396 100644
--- a/arch/arm/dts/stih410.dtsi
+++ b/arch/arm/dts/stih410.dtsi
@@ -98,15 +98,15 @@
};
ehci0: usb at 9a03e00 {
- compatible = "st,st-ehci-300x";
+ compatible = "generic-ehci";
reg = <0x9a03e00 0x100>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
- resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
- <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ resets = <&softreset STIH407_USB2_PORT0_SOFTRESET>,
+ <&powerdown STIH407_USB2_PORT0_POWERDOWN>;
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
@@ -130,15 +130,15 @@
};
ehci1: usb at 9a83e00 {
- compatible = "st,st-ehci-300x";
+ compatible = "generic-ehci";
reg = <0x9a83e00 0x100>;
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
- resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
- <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ resets = <&softreset STIH407_USB2_PORT1_SOFTRESET>,
+ <&powerdown STIH407_USB2_PORT1_POWERDOWN>;
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
--
1.9.1
More information about the U-Boot
mailing list