[U-Boot] [PATCH v5 12/14] usb: extend generic OHCI with clock, reset and phy
Marek Vasut
marex at denx.de
Wed May 10 21:20:03 UTC 2017
On 05/10/2017 06:09 PM, patrice.chotard at st.com wrote:
> From: Patrice Chotard <patrice.chotard at st.com>
>
> Make this driver more generic as echi-generic
EHCI , although the typo is kinda funny .
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> ---
>
> v5: _ add clock, reset and generic phy support
>
> drivers/usb/host/ohci-generic.c | 48 +++++++++++++++++++++++++++++++++++------
> 1 file changed, 42 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
> index f3307f4..33e8095 100644
> --- a/drivers/usb/host/ohci-generic.c
> +++ b/drivers/usb/host/ohci-generic.c
> @@ -5,7 +5,12 @@
> */
>
> #include <common.h>
> +#include <clk.h>
> #include <dm.h>
> +#include <fdtdec.h>
> +#include <generic-phy.h>
> +#include <reset.h>
> +
> #include "ohci.h"
>
> #if !defined(CONFIG_USB_OHCI_NEW)
> @@ -19,13 +24,44 @@ struct generic_ohci {
> static int ohci_usb_probe(struct udevice *dev)
> {
> struct ohci_regs *regs = (struct ohci_regs *)dev_get_addr(dev);
> + int i;
>
> - return ohci_register(dev, regs);
> -}
> + for (i = 0; ; i++) {
> + struct clk clk;
> + int ret;
>
> -static int ohci_usb_remove(struct udevice *dev)
> -{
> - return ohci_deregister(dev);
> + ret = clk_get_by_index(dev, i, &clk);
> + if (ret < 0)
> + break;
> + if (clk_enable(&clk))
> + printf("failed to enable clock %d\n", i);
> + clk_free(&clk);
> + }
> +
> + for (i = 0; ; i++) {
> + struct reset_ctl reset;
> + int ret;
> +
> + ret = reset_get_by_index(dev, i, &reset);
> + if (ret < 0)
> + break;
> + if (reset_deassert(&reset))
> + printf("failed to deassert reset %d\n", i);
You should look up the resets and clock and whatnot by phandle .
> + reset_free(&reset);
> + }
> +
> + for (i = 0; ; i++) {
> + struct phy usb_phy;
> + int ret;
> +
> + ret = generic_phy_get_by_index(dev, i, &usb_phy);
> + if (ret < 0)
> + break;
> + if (generic_phy_init(&usb_phy))
> + printf("failed to init usb phy %d\n", i);
> + }
> +
> + return ohci_register(dev, regs);
> }
>
> static const struct udevice_id ohci_usb_ids[] = {
> @@ -38,7 +74,7 @@ U_BOOT_DRIVER(ohci_generic) = {
> .id = UCLASS_USB,
> .of_match = ohci_usb_ids,
> .probe = ohci_usb_probe,
> - .remove = ohci_usb_remove,
> + .remove = ohci_deregister,
> .ops = &ohci_usb_ops,
> .priv_auto_alloc_size = sizeof(struct generic_ohci),
> .flags = DM_FLAG_ALLOC_PRIV_DMA,
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list