[U-Boot] [PATCH v5 05/33] ARM: i.MX6Q: sabresd: Add initial devicetree support

[Fabio Estevam]

On Thu, May 4, 2017 at 12:11 PM, Jagan Teki <jagan at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Add initial devicetree support for i.MX6 Quad Sabresd board.
>
> The configs item are copied from configs/mx6sabresd_spl_defconfig
> and added
> - CONFIG_OF_CONTROL=y
> - CONFIG_DM_GPIO=y
> - CONFIG_DM_MMC=y
> - CONFIG_BLK is not set
> - CONFIG_DM_MMC_OPS is not set
> - CONFIG_PINCTRL=y
> - CONFIG_PINCTRL_IMX6=y
>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  board/freescale/mx6sabresd/MAINTAINERS  |   1 +
>  board/freescale/mx6sabresd/mx6sabresd.c | 132 ++++++++++++++++++++++----------
>  configs/imx6qdl_sabresd_spl_defconfig   |  62 +++++++++++++++
>  include/configs/mx6sabresd.h            |   4 +
>  4 files changed, 159 insertions(+), 40 deletions(-)
>  create mode 100644 configs/imx6qdl_sabresd_spl_defconfig
>
> diff --git a/board/freescale/mx6sabresd/MAINTAINERS b/board/freescale/mx6sabresd/MAINTAINERS
> index add2314..ccb939d 100644
> --- a/board/freescale/mx6sabresd/MAINTAINERS
> +++ b/board/freescale/mx6sabresd/MAINTAINERS
> @@ -6,3 +6,4 @@ F:      include/configs/mx6sabresd.h
>  F:     configs/mx6dlsabresd_defconfig
>  F:     configs/mx6qsabresd_defconfig
>  F:     configs/mx6sabresd_spl_defconfig
> +F:     configs/imx6qdl_sabresd_spl_defconfig

mx6qdl_sabresd_spl_defconfig is not a good name:

- We do not support mx6dl currently
- We support mx6qp

Just use the existing mx6sabresd_spl_defconfig.