[U-Boot] [PATCH v5 11/33] ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC

[Fabio Estevam]

On Thu, May 4, 2017 at 12:11 PM, Jagan Teki <jagan at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Enable DM_I2C, DM_PMIC and DM_PMIC_PFUZE100 for dt
> supported sabresd config board
>
> I2C Log:
> --------
> => i2c bus
> Bus 0:  i2c at 021a0000
> Bus 1:  i2c at 021a4000
>    08: pfuze100 at 08, offset len 1, flags 0
> Bus 2:  i2c at 021a8000
> => i2c dev 1
> Setting bus to 1
> => i2c speed 100000
> Setting bus speed to 100000 Hz
> => i2c probe
> Valid chip addresses: 08 48
> => i2c md 08 0x0 0x20
> 0000: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10    ................
> 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
> => i2c md 48 0x0 0x20
> 0000: 00 f0 00 00 00 00 00 00 00 00 00 80 70 41 41 41    ............pAAA
> 0010: 00 00 00 80 70 41 41 41 41 41 41 41 41 41 41 41    ....pAAAAAAAAAAA
>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>