[U-Boot] [PATCH 9/9] engicam: Generate single config file

Jagan Teki jagan at openedev.com
Fri May 12 11:48:28 UTC 2017


From: Jagan Teki <jagan at amarulasolutions.com>

Engicam has several SOM's on i.MX6 stream, where each SOM
has one include/configs/*.h file, this patch generate single
config file for all SOM's include/configs/imx6-engicam.h

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 board/engicam/geam6ul/Kconfig                      |   2 +-
 board/engicam/icorem6/Kconfig                      |   2 +-
 board/engicam/icorem6_rqs/Kconfig                  |   2 +-
 board/engicam/isiotmx6ul/Kconfig                   |   2 +-
 .../configs/{imx6qdl_icore.h => imx6-engicam.h}    |  39 ++--
 include/configs/imx6qdl_icore_rqs.h                | 149 ----------------
 include/configs/imx6ul_geam.h                      | 197 --------------------
 include/configs/imx6ul_isiot.h                     | 198 ---------------------
 8 files changed, 33 insertions(+), 558 deletions(-)
 rename include/configs/{imx6qdl_icore.h => imx6-engicam.h} (85%)
 delete mode 100644 include/configs/imx6qdl_icore_rqs.h
 delete mode 100644 include/configs/imx6ul_geam.h
 delete mode 100644 include/configs/imx6ul_isiot.h

diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/geam6ul/Kconfig
index 8753d15..7f4023e 100644
--- a/board/engicam/geam6ul/Kconfig
+++ b/board/engicam/geam6ul/Kconfig
@@ -7,6 +7,6 @@ config SYS_VENDOR
 	default "engicam"
 
 config SYS_CONFIG_NAME
-	default "imx6ul_geam"
+	default "imx6-engicam"
 
 endif
diff --git a/board/engicam/icorem6/Kconfig b/board/engicam/icorem6/Kconfig
index 6d62f0e..4a1c9ac 100644
--- a/board/engicam/icorem6/Kconfig
+++ b/board/engicam/icorem6/Kconfig
@@ -7,6 +7,6 @@ config SYS_VENDOR
 	default "engicam"
 
 config SYS_CONFIG_NAME
-	default "imx6qdl_icore"
+	default "imx6-engicam"
 
 endif
diff --git a/board/engicam/icorem6_rqs/Kconfig b/board/engicam/icorem6_rqs/Kconfig
index 1352c68..6dc3a07 100644
--- a/board/engicam/icorem6_rqs/Kconfig
+++ b/board/engicam/icorem6_rqs/Kconfig
@@ -7,6 +7,6 @@ config SYS_VENDOR
 	default "engicam"
 
 config SYS_CONFIG_NAME
-	default "imx6qdl_icore_rqs"
+	default "imx6-engicam"
 
 endif
diff --git a/board/engicam/isiotmx6ul/Kconfig b/board/engicam/isiotmx6ul/Kconfig
index 213ffad..10c2c50 100644
--- a/board/engicam/isiotmx6ul/Kconfig
+++ b/board/engicam/isiotmx6ul/Kconfig
@@ -7,6 +7,6 @@ config SYS_VENDOR
 	default "engicam"
 
 config SYS_CONFIG_NAME
-	default "imx6ul_isiot"
+	default "imx6-engicam"
 
 endif
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6-engicam.h
similarity index 85%
rename from include/configs/imx6qdl_icore.h
rename to include/configs/imx6-engicam.h
index 4f7029d..e85dbc7 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6-engicam.h
@@ -2,13 +2,13 @@
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
  *
- * Configuration settings for the Engicam i.CoreM6 QDL Starter Kits.
+ * Configuration settings for the Engicam i.MX6 SOM Starter Kits.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __IMX6QLD_ICORE_CONFIG_H
-#define __IMX6QLD_ICORE_CONFIG_H
+#ifndef __IMX6_ENGICAM_CONFIG_H
+#define __IMX6_ENGICAM_CONFIG_H
 
 #include <linux/sizes.h>
 #include "mx6_common.h"
@@ -109,8 +109,13 @@
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
-#define DRAM_OFFSET(x)			0x1##x
-#define FDT_ADDR			__stringify(DRAM_OFFSET(8000000))
+#ifdef CONFIG_MX6UL
+# define DRAM_OFFSET(x)			0x87##x
+# define FDT_ADDR			__stringify(DRAM_OFFSET(800000))
+#else 
+# define DRAM_OFFSET(x)			0x1##x
+# define FDT_ADDR			__stringify(DRAM_OFFSET(8000000))
+#endif
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -135,7 +140,11 @@
 
 /* UART */
 #ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE		UART4_BASE
+# ifdef CONFIG_MX6UL
+#  define CONFIG_MXC_UART_BASE		UART1_BASE
+# else
+#  define CONFIG_MXC_UART_BASE		UART4_BASE
+# endif
 #endif
 
 /* MMC */
@@ -172,8 +181,13 @@
 
 /* Ethernet */
 #ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR		0
-# define CONFIG_FEC_XCV_TYPE		RMII
+# ifdef CONFIG_TARGET_MX6Q_ICORE_RQS
+#  define CONFIG_FEC_MXC_PHYADDR	3
+#  define CONFIG_FEC_XCV_TYPE		RGMII
+# else
+#  define CONFIG_FEC_MXC_PHYADDR	0
+#  define CONFIG_FEC_XCV_TYPE		RMII
+# endif
 
 # define CONFIG_MII
 #endif
@@ -201,11 +215,16 @@
 
 # include "imx6_spl.h"
 # ifdef CONFIG_SPL_BUILD
-#  define CONFIG_SYS_FSL_USDHC_NUM	1
+#  if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
+#   define CONFIG_SYS_FSL_USDHC_NUM	2
+#  else
+#   define CONFIG_SYS_FSL_USDHC_NUM	1
+#  endif
+
 #  define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #  undef CONFIG_DM_GPIO
 #  undef CONFIG_DM_MMC
 # endif
 #endif
 
-#endif /* __IMX6QLD_ICORE_CONFIG_H */
+#endif /* __IMX6_ENGICAM_CONFIG_H */
diff --git a/include/configs/imx6qdl_icore_rqs.h b/include/configs/imx6qdl_icore_rqs.h
deleted file mode 100644
index d1e482d..0000000
--- a/include/configs/imx6qdl_icore_rqs.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam i.CoreM6 QDL RQS Starter Kits.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __IMX6QLD_ICORE_RQS_CONFIG_H
-#define __IMX6QLD_ICORE_RQS_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE			SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-#  define CONFIG_ENV_OFFSET		0x100000
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=uImage\0" \
-	"fit_image=fit.itb\0" \
-	"fdt_high=0xffffffff\0" \
-	"fdt_addr=" FDT_ADDR "\0" \
-	"boot_fdt=try\0" \
-	"mmcpart=1\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
-	"fitboot=echo Booting FIT image from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"_mmcboot=run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"mmc dev ${mmcdev};" \
-		"if mmc rescan; then " \
-			"if run loadbootscript; then " \
-				"run bootscript; " \
-			"else " \
-				"if run loadfit; then " \
-					"run fitboot; " \
-				"else " \
-					"if run loadimage; then " \
-						"run _mmcboot; " \
-					"fi; " \
-				"fi; " \
-			"fi; " \
-		"fi\0"
-
-#define CONFIG_BOOTCOMMAND		"run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
-#define DRAM_OFFSET(x)			0x1##x
-#define FDT_ADDR			__stringify(DRAM_OFFSET(8000000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE		UART4_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR		3
-# define CONFIG_FEC_XCV_TYPE		RGMII
-
-# define CONFIG_MII
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# define CONFIG_SPL_MMC_SUPPORT
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-#  define CONFIG_SYS_FSL_USDHC_NUM	2
-#  define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#  undef CONFIG_DM_GPIO
-#  undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6QLD_ICORE_RQS_CONFIG_H */
diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h
deleted file mode 100644
index 0502e1b..0000000
--- a/include/configs/imx6ul_geam.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam GEAM6UL  Starter Kits.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __IMX6UL_GEAM_CONFIG_H
-#define __IMX6UL_GEAM_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE			SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-#  define CONFIG_ENV_OFFSET		0x100000
-/* Environment in NAND */
-# elif defined(CONFIG_ENV_IS_IN_NAND)
-#  define CONFIG_ENV_OFFSET		0x400000
-#  define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=uImage\0" \
-	"fit_image=fit.itb\0" \
-	"fdt_high=0xffffffff\0" \
-	"fdt_addr=" FDT_ADDR "\0" \
-	"boot_fdt=try\0" \
-	"mmcpart=1\0" \
-	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"ubiargs=setenv bootargs console=${console},${baudrate} " \
-		"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
-	"fitboot=echo Booting FIT image from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"_mmcboot=run mmcargs; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"if mmc rescan; then " \
-			"if run loadbootscript; then " \
-				"run bootscript; " \
-			"else " \
-				"if run loadfit; then " \
-					"run fitboot; " \
-				"else " \
-					"if run loadimage; then " \
-						"run _mmcboot; " \
-					"fi; " \
-				"fi; " \
-			"fi; " \
-		"fi\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"if mtdparts; then " \
-			"echo Starting nand boot ...; " \
-		"else " \
-			"mtdparts default; " \
-		"fi; " \
-		"run ubiargs; " \
-		"nand read ${loadaddr} kernel 0x800000; " \
-		"nand read ${fdt_addr} dtb 0x100000; " \
-		"bootm ${loadaddr} - ${fdt_addr}\0"
-
-#define CONFIG_BOOTCOMMAND		"run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
-#define DRAM_OFFSET(x)			0x87##x
-#define FDT_ADDR			__stringify(DRAM_OFFSET(800000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE		UART1_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-
-/* NAND */
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_SYS_MAX_NAND_DEVICE	1
-# define CONFIG_SYS_NAND_BASE		0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
-# define CONFIG_SYS_NAND_ONFI_DETECTION
-# define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-# define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
-
-/* MTD device */
-# define CONFIG_MTD_DEVICE
-# define CONFIG_CMD_MTDPARTS
-# define CONFIG_MTD_PARTITIONS
-# define MTDIDS_DEFAULT			"nand0=gpmi-nand"
-# define MTDPARTS_DEFAULT		"mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
-					"1m(env),8m(kernel),1m(dtb),-(rootfs)"
-
-/* UBI */
-# define CONFIG_CMD_UBIFS
-# define CONFIG_RBTREE
-# define CONFIG_LZO
-
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR		0
-# define CONFIG_FEC_XCV_TYPE		RMII
-
-# define CONFIG_MII
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# ifdef CONFIG_NAND_MXS
-#  define CONFIG_SPL_NAND_SUPPORT
-# else
-#  define CONFIG_SPL_MMC_SUPPORT
-# endif
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-#  define CONFIG_SYS_FSL_USDHC_NUM	1
-#  define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#  undef CONFIG_DM_GPIO
-#  undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6UL_GEAM_CONFIG_H */
diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
deleted file mode 100644
index 23aabed..0000000
--- a/include/configs/imx6ul_isiot.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam Is.IoT MX6UL Starter Kits.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __IMX6UL_ISIOT_CONFIG_H
-#define __IMX6UL_ISIOT_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE			SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-#  define CONFIG_ENV_OFFSET		0x100000
-/* Environment in NAND */
-# elif defined(CONFIG_ENV_IS_IN_NAND)
-#  define CONFIG_ENV_OFFSET		0x400000
-#  define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=uImage\0" \
-	"fit_image=fit.itb\0" \
-	"splashpos=m,m\0" \
-	"fdt_high=0xffffffff\0" \
-	"fdt_addr=" FDT_ADDR "\0" \
-	"boot_fdt=try\0" \
-	"mmcpart=1\0" \
-	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"ubiargs=setenv bootargs console=${console},${baudrate} " \
-		"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
-	"fitboot=echo Booting FIT image from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"_mmcboot=run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"if mmc rescan; then " \
-			"if run loadbootscript; then " \
-				"run bootscript; " \
-			"else " \
-				"if run loadfit; then " \
-					"run fitboot; " \
-				"else " \
-					"if run loadimage; then " \
-						"run _mmcboot; " \
-					"fi; " \
-				"fi; " \
-			"fi; " \
-		"fi\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"if mtdparts; then " \
-			"echo Starting nand boot ...; " \
-		"else " \
-			"mtdparts default; " \
-		"fi; " \
-		"run ubiargs; " \
-		"nand read ${loadaddr} kernel 0x800000; " \
-		"nand read ${fdt_addr} dtb 0x100000; " \
-		"bootm ${loadaddr} - ${fdt_addr}\0"
-
-#define CONFIG_BOOTCOMMAND		"run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
-#define DRAM_OFFSET(x)			0x87##x
-#define FDT_ADDR			__stringify(DRAM_OFFSET(800000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE		UART1_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-
-/* NAND */
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_SYS_MAX_NAND_DEVICE	1
-# define CONFIG_SYS_NAND_BASE		0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
-# define CONFIG_SYS_NAND_ONFI_DETECTION
-# define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-# define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
-
-/* MTD device */
-# define CONFIG_MTD_DEVICE
-# define CONFIG_CMD_MTDPARTS
-# define CONFIG_MTD_PARTITIONS
-# define MTDIDS_DEFAULT			"nand0=gpmi-nand"
-# define MTDPARTS_DEFAULT		"mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
-					"1m(env),8m(kernel),1m(dtb),-(rootfs)"
-
-/* UBI */
-# define CONFIG_CMD_UBIFS
-# define CONFIG_RBTREE
-# define CONFIG_LZO
-
-/* APBH DMA */
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR		0
-# define CONFIG_FEC_XCV_TYPE		RMII
-
-# define CONFIG_MII
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# ifdef CONFIG_NAND_MXS
-#  define CONFIG_SPL_NAND_SUPPORT
-# else
-#  define CONFIG_SPL_MMC_SUPPORT
-# endif
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-#  define CONFIG_SYS_FSL_USDHC_NUM	2
-#  define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#  undef CONFIG_DM_GPIO
-#  undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6UL_ISIOT_CONFIG_H */
-- 
1.9.1



More information about the U-Boot mailing list