[U-Boot] [PATCH 1/3] driver/ddr: Add support for setting timing in hws_topology_map
Marek BehĂșn
marek.behun at nic.cz
Fri May 12 14:10:06 UTC 2017
The DDR3 training code for Marvell A38X currently computes 1t timing
when given board topology map of the Turris Omnia, but Omnia needs 2t.
This patch adds support for enforcing the 2t timing in struct
hws_topology_map, through a new enum hws_timing, which can assume
following values:
HWS_TIM_DEFAULT - default behaviour, compute whether to enable 2t
from the number of CSs
HWS_TIM_1T - enforce 1t
HWS_TIM_2T - enforce 2t
This patch also sets all the board topology maps (db-88f6820-amc,
db-88f6820-gp, controlcenterdc and clearfog) to have timing set to
HWS_TIM_DEFAULT.
Signed-off-by: Marek Behun <marek.behun at nic.cz>
---
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 3 ++-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 3 ++-
board/gdsys/a38x/controlcenterdc.c | 3 ++-
board/solidrun/clearfog/clearfog.c | 3 ++-
drivers/ddr/marvell/a38x/ddr3_training.c | 5 +++++
drivers/ddr/marvell/a38x/ddr_topology_def.h | 9 +++++++++
6 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
index cade99c..40fa599 100644
--- a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
+++ b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
@@ -69,7 +69,8 @@ static struct hws_topology_map board_topology_map = {
MEM_4G, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_l cas_wl */
- HWS_TEMP_LOW} }, /* temperature */
+ HWS_TEMP_LOW, /* temperature */
+ HWS_TIM_DEFAULT} }, /* timing */
5, /* Num Of Bus Per Interface*/
BUS_MASK_32BIT /* Busses mask */
};
diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
index e700781..a1974cb 100644
--- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
+++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
@@ -90,7 +90,8 @@ static struct hws_topology_map board_topology_map = {
MEM_4G, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_l cas_wl */
- HWS_TEMP_LOW} }, /* temperature */
+ HWS_TEMP_LOW, /* temperature */
+ HWS_TIM_DEFAULT} }, /* timing */
5, /* Num Of Bus Per Interface*/
BUS_MASK_32BIT /* Busses mask */
};
diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c
index f0efb53..32168d3 100644
--- a/board/gdsys/a38x/controlcenterdc.c
+++ b/board/gdsys/a38x/controlcenterdc.c
@@ -53,7 +53,8 @@ static struct hws_topology_map ddr_topology_map = {
MEM_4G, /* mem_size */
DDR_FREQ_533, /* frequency */
0, 0, /* cas_l cas_wl */
- HWS_TEMP_LOW} }, /* temperature */
+ HWS_TEMP_LOW, /* temperature */
+ HWS_TIM_DEFAULT} }, /* timing */
5, /* Num Of Bus Per Interface*/
BUS_MASK_32BIT /* Busses mask */
};
diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index 2773f59..036e183 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -83,7 +83,8 @@ static struct hws_topology_map board_topology_map = {
MEM_4G, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_l cas_wl */
- HWS_TEMP_LOW} }, /* temperature */
+ HWS_TEMP_LOW, /* temperature */
+ HWS_TIM_DEFAULT} }, /* timing */
5, /* Num Of Bus Per Interface*/
BUS_MASK_32BIT /* Busses mask */
};
diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c
index 7e0749f..c79db6a 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training.c
@@ -571,6 +571,11 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_
if (mode2_t != 0xff) {
t2t = mode2_t;
+ } else if (tm->interface_params[if_id].
+ timing != HWS_TIM_DEFAULT) {
+ /* Board topology map is forcing timing */
+ t2t = (tm->interface_params[if_id].
+ timing == HWS_TIM_2T) ? 1 : 0;
} else {
/* calculate number of CS (per interface) */
CHECK_STATUS(calc_cs_num
diff --git a/drivers/ddr/marvell/a38x/ddr_topology_def.h b/drivers/ddr/marvell/a38x/ddr_topology_def.h
index f8894e8..229c3a1 100644
--- a/drivers/ddr/marvell/a38x/ddr_topology_def.h
+++ b/drivers/ddr/marvell/a38x/ddr_topology_def.h
@@ -37,6 +37,12 @@ enum hws_mem_size {
MEM_SIZE_LAST
};
+enum hws_timing {
+ HWS_TIM_DEFAULT,
+ HWS_TIM_1T,
+ HWS_TIM_2T
+};
+
struct bus_params {
/* Chip Select (CS) bitmask (bits 0-CS0, bit 1- CS1 ...) */
u8 cs_bitmask;
@@ -84,6 +90,9 @@ struct if_params {
/* operation temperature */
enum hws_temperature interface_temp;
+
+ /* 2T vs 1T mode (by default computed from number of CSs) */
+ enum hws_timing timing;
};
struct hws_topology_map {
--
2.10.2
More information about the U-Boot
mailing list