[U-Boot] [PATCH] LS2081ARDB: Enable CONFIG_SPI_FLASH_BAR option

[York Sun]

On 05/11/2017 01:36 AM, Yogesh Gaur wrote:
> On LS2081ARDB both QSPI and DSPI are having flash n25q512a of micron family
> which supports EAR Read/Write cmds, thus enable CONFIG_SPI_FLASH_BAR config.
> Else only lower 16MiB accessible for these flashes.
>
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur at nxp.com>
> ---
>  Depends on :
>  https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F755920%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C6990807b3cc340bcf5d208d49848c6ee%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=EIlAri7rShB22Yggt2juWDkBGK5PnxyO3RE9rfDEQlc%3D&reserved=0
>
>  include/configs/ls2080ardb.h | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
> index 6abf54b..08ac9a9 100644
> --- a/include/configs/ls2080ardb.h
> +++ b/include/configs/ls2080ardb.h
> @@ -299,6 +299,11 @@ unsigned long get_board_sys_clk(void);
>  #ifdef CONFIG_FSL_QSPI
>  #ifdef CONFIG_TARGET_LS2081ARDB
>  #define CONFIG_SPI_FLASH_STMICRO
> +/*
> + * On LS2081ARDB both QSPI and DSPI are having flash n25q512a of micron
> + * family which supports EAR Read/Write cmds, thus enable below config
> + */
> +#define CONFIG_SPI_FLASH_BAR
>  #else
>  #define CONFIG_SPI_FLASH_SPANSION
>  #endif
>

Suresh,

Is this impacted by the same QSPI driver you are working on?

York