[U-Boot] [PATCH 12/17] omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE

[Tom Rini]

The symbol CONFIG_OMAP_VC_I2C_HS_MCODE always uses the default value.
Restructure the comment and code such that if a need arises later to use
another value we can address this then.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/mach-omap2/vc.c     | 14 ++++----------
 scripts/config_whitelist.txt |  1 -
 2 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index a68f1d145dcb..b7f79800de57 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -19,14 +19,6 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/clock.h>
 
-/*
- * Define Master code if there are multiple masters on the I2C_SR bus.
- * Normally not required
- */
-#ifndef CONFIG_OMAP_VC_I2C_HS_MCODE
-#define CONFIG_OMAP_VC_I2C_HS_MCODE 0x0
-#endif
-
 /* Register defines and masks for VC IP Block */
 /* PRM_VC_CFG_I2C_MODE */
 #define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT	(0x1 << 6)
@@ -84,8 +76,10 @@ static void omap_vc_init(u16 speed_khz)
 	       (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
 	writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
 
-	val = CONFIG_OMAP_VC_I2C_HS_MCODE <<
-		PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
+	/*
+	 * Master code if there are multiple masters on the I2C_SR bus.
+	 */
+	val = 0x0 << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
 	/* No HS mode for now */
 	val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
 	writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e86e7388dce5..bb73ba774e3d 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1987,7 +1987,6 @@ CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
 CONFIG_OMAP_USB2PHY2_HOST
 CONFIG_OMAP_USB3PHY1_HOST
 CONFIG_OMAP_USB_PHY
-CONFIG_OMAP_VC_I2C_HS_MCODE
 CONFIG_OPTREX_BW
 CONFIG_ORIGEN
 CONFIG_OS1_ENV_ADDR
-- 
1.9.1