[U-Boot] [PATCH 16/23] ARM: rmobile: salvator-x: Add SD support
Marek Vasut
marek.vasut at gmail.com
Sat May 13 13:57:46 UTC 2017
Add support for the SD card slots on the Salvator-X board.
Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx at renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
board/renesas/salvator-x/salvator-x.c | 89 ++++++++++++++++++++++++++++++++++-
configs/salvator-x_defconfig | 8 ++--
include/configs/salvator-x.h | 10 +++-
3 files changed, 102 insertions(+), 5 deletions(-)
diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c
index 3f2bebf74f..1ee5cf1051 100644
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@@ -2,7 +2,7 @@
* board/renesas/salvator-x/salvator-x.c
* This file is Salvator-X board support.
*
- * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
* Copyright (C) 2015 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -22,6 +22,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/rmobile.h>
#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/sh_sdhi.h>
#include <i2c.h>
#include <mmc.h>
@@ -48,6 +49,15 @@ void s_init(void)
#define TMU0_MSTP125 BIT(25) /* secure */
#define TMU1_MSTP124 BIT(24) /* non-secure */
#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
+#define SD0_MSTP314 BIT(14)
+#define SD1_MSTP313 BIT(13)
+#define SD2_MSTP312 BIT(12) /* either MMC0 */
+#define SD3_MSTP311 BIT(11) /* either MMC1 */
+
+#define SD0CKCR 0xE6150074
+#define SD1CKCR 0xE6150078
+#define SD2CKCR 0xE6150268
+#define SD3CKCR 0xE615026C
int board_early_init_f(void)
{
@@ -55,6 +65,15 @@ int board_early_init_f(void)
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
/* SCIF2 */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310);
+ /* eMMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD1_MSTP313 | SD2_MSTP312);
+ /* SDHI0, 3 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD0_MSTP314 | SD3_MSTP311);
+
+ writel(0, SD0CKCR);
+ writel(0, SD1CKCR);
+ writel(0, SD2CKCR);
+ writel(0, SD3CKCR);
return 0;
}
@@ -83,6 +102,74 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_SH_SDHI
+int board_mmc_init(bd_t *bis)
+{
+ int ret = -ENODEV;
+
+ /* SDHI0 */
+ gpio_request(GPIO_GFN_SD0_DAT0, NULL);
+ gpio_request(GPIO_GFN_SD0_DAT1, NULL);
+ gpio_request(GPIO_GFN_SD0_DAT2, NULL);
+ gpio_request(GPIO_GFN_SD0_DAT3, NULL);
+ gpio_request(GPIO_GFN_SD0_CLK, NULL);
+ gpio_request(GPIO_GFN_SD0_CMD, NULL);
+ gpio_request(GPIO_GFN_SD0_CD, NULL);
+ gpio_request(GPIO_GFN_SD0_WP, NULL);
+
+ gpio_request(GPIO_GP_5_2, NULL);
+ gpio_request(GPIO_GP_5_1, NULL);
+ gpio_direction_output(GPIO_GP_5_2, 1); /* power on */
+ gpio_direction_output(GPIO_GP_5_1, 1); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
+ SH_SDHI_QUIRK_64BIT_BUF);
+ if (ret)
+ return ret;
+
+ /* SDHI1/SDHI2 eMMC */
+ gpio_request(GPIO_GFN_SD1_DAT0, NULL);
+ gpio_request(GPIO_GFN_SD1_DAT1, NULL);
+ gpio_request(GPIO_GFN_SD1_DAT2, NULL);
+ gpio_request(GPIO_GFN_SD1_DAT3, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT0, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT1, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT2, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT3, NULL);
+ gpio_request(GPIO_GFN_SD2_CLK, NULL);
+ gpio_request(GPIO_GFN_SD2_CMD, NULL);
+ gpio_request(GPIO_GP_5_3, NULL);
+ gpio_request(GPIO_GP_5_9, NULL);
+ gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */
+ gpio_direction_output(GPIO_GP_5_9, 0); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 1,
+ SH_SDHI_QUIRK_64BIT_BUF);
+ if (ret)
+ return ret;
+
+ /* SDHI3 */
+ gpio_request(GPIO_GFN_SD3_DAT0, NULL); /* GP_4_9 */
+ gpio_request(GPIO_GFN_SD3_DAT1, NULL); /* GP_4_10 */
+ gpio_request(GPIO_GFN_SD3_DAT2, NULL); /* GP_4_11 */
+ gpio_request(GPIO_GFN_SD3_DAT3, NULL); /* GP_4_12 */
+ gpio_request(GPIO_GFN_SD3_CLK, NULL); /* GP_4_7 */
+ gpio_request(GPIO_GFN_SD3_CMD, NULL); /* GP_4_8 */
+ /* IPSR10 */
+ gpio_request(GPIO_FN_SD3_CD, NULL);
+ gpio_request(GPIO_FN_SD3_WP, NULL);
+
+ gpio_request(GPIO_GP_3_15, NULL);
+ gpio_request(GPIO_GP_3_14, NULL);
+ gpio_direction_output(GPIO_GP_3_15, 1); /* power on */
+ gpio_direction_output(GPIO_GP_3_14, 1); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI3_BASE, 2,
+ SH_SDHI_QUIRK_64BIT_BUF);
+ return ret;
+}
+#endif
+
int dram_init(void)
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
diff --git a/configs/salvator-x_defconfig b/configs/salvator-x_defconfig
index 8cef6075e9..1478b6ae3b 100644
--- a/configs/salvator-x_defconfig
+++ b/configs/salvator-x_defconfig
@@ -8,9 +8,11 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_FDT=y
CONFIG_R8A7795=y
-# CONFIG_CMD_IMI is not set
+CONFIG_SH_SDHI=y
# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_EDITENV=y
+CONFIG_CMD_SAVEENV=y
CONFIG_DOS_PARTITION=y
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+CONFIG_GENERIC_MMC=y
CONFIG_OF_LIBFDT=y
diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h
index 94f62a7358..91307eb353 100644
--- a/include/configs/salvator-x.h
+++ b/include/configs/salvator-x.h
@@ -24,7 +24,6 @@
/* [A] Hyper Flash */
/* use to RPC(SPI Multi I/O Bus Controller) */
-#define CONFIG_ENV_IS_NOWHERE
/* Board Clock */
/* XTAL_CLK : 33.33MHz */
@@ -45,6 +44,15 @@
#define GICD_BASE 0xF1010000
#define GICC_BASE 0xF1020000
+/* SDHI */
+#define CONFIG_SH_SDHI_FREQ 200000000
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#define CONFIG_SYS_MMC_ENV_PART 2
+
/* Module stop status bits */
/* MFIS, SCIF1 */
#define CONFIG_SMSTP2_ENA 0x00002040
--
2.11.0
More information about the U-Boot
mailing list