[U-Boot] [PATCH 23/23] ARM: rmobile: salvator-x: Add R8A7796 support
Marek Vasut
marek.vasut at gmail.com
Sat May 13 13:57:53 UTC 2017
Add minor ifdeffery and default board config for the Salvator-XS board
with R8A7796 M3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx at renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
board/renesas/salvator-x/MAINTAINERS | 1 +
board/renesas/salvator-x/salvator-x.c | 28 ++++++++++++++++++++++++++--
configs/r8a7796_salvator-x_defconfig | 31 +++++++++++++++++++++++++++++++
3 files changed, 58 insertions(+), 2 deletions(-)
create mode 100644 configs/r8a7796_salvator-x_defconfig
diff --git a/board/renesas/salvator-x/MAINTAINERS b/board/renesas/salvator-x/MAINTAINERS
index 33c105d0cc..f7b98fb097 100644
--- a/board/renesas/salvator-x/MAINTAINERS
+++ b/board/renesas/salvator-x/MAINTAINERS
@@ -4,3 +4,4 @@ S: Maintained
F: board/renesas/salvator-x/
F: include/configs/salvator-x.h
F: configs/r8a7795_salvator-x_defconfig
+F: configs/r8a7796_salvator-x_defconfig
diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c
index 14385d7361..6270de4e40 100644
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@@ -1,6 +1,6 @@
/*
* board/renesas/salvator-x/salvator-x.c
- * This file is Salvator-X board support.
+ * This file is Salvator-X/Salvator-XS board support.
*
* Copyright (C) 2015-2017 Renesas Electronics Corporation
* Copyright (C) 2015 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
@@ -98,14 +98,20 @@ int board_init(void)
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
/* Init PFC controller */
+#if defined(CONFIG_R8A7795)
r8a7795_pinmux_init();
+#elif defined(CONFIG_R8A7796)
+ r8a7796_pinmux_init();
+#endif
+#if defined(CONFIG_R8A7795)
/* GSX: force power and clock supply */
writel(0x0000001F, SYSC_PWRONCR2);
while (readl(SYSC_PWRSR2) != 0x000003E0)
mdelay(20);
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112);
+#endif
/* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
@@ -134,6 +140,7 @@ int board_init(void)
/* IPSR3 */
gpio_request(GPIO_FN_AVB_AVTP_CAPTURE_B, NULL);
+#if defined(CONFIG_R8A7795)
/* USB2_OVC */
gpio_request(GPIO_GP_6_15, NULL);
gpio_direction_input(GPIO_GP_6_15);
@@ -142,7 +149,7 @@ int board_init(void)
gpio_request(GPIO_GP_6_14, NULL);
gpio_direction_output(GPIO_GP_6_14, 1);
gpio_set_value(GPIO_GP_6_14, 1);
-
+#endif
/* AVB_PHY_RST */
gpio_request(GPIO_GP_2_10, NULL);
gpio_direction_output(GPIO_GP_2_10, 0);
@@ -200,7 +207,13 @@ int board_mmc_init(bd_t *bis)
gpio_request(GPIO_GFN_SD2_DAT2, NULL);
gpio_request(GPIO_GFN_SD2_DAT3, NULL);
gpio_request(GPIO_GFN_SD2_CLK, NULL);
+#if defined(CONFIG_R8A7795)
gpio_request(GPIO_GFN_SD2_CMD, NULL);
+#elif defined(CONFIG_R8A7796)
+ gpio_request(GPIO_FN_SD2_CMD, NULL);
+#else
+#error Only R8A7795 and R87796 is supported
+#endif
gpio_request(GPIO_GP_5_3, NULL);
gpio_request(GPIO_GP_5_9, NULL);
gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */
@@ -211,6 +224,7 @@ int board_mmc_init(bd_t *bis)
if (ret)
return ret;
+#if defined(CONFIG_R8A7795)
/* SDHI3 */
gpio_request(GPIO_GFN_SD3_DAT0, NULL); /* GP_4_9 */
gpio_request(GPIO_GFN_SD3_DAT1, NULL); /* GP_4_10 */
@@ -218,6 +232,16 @@ int board_mmc_init(bd_t *bis)
gpio_request(GPIO_GFN_SD3_DAT3, NULL); /* GP_4_12 */
gpio_request(GPIO_GFN_SD3_CLK, NULL); /* GP_4_7 */
gpio_request(GPIO_GFN_SD3_CMD, NULL); /* GP_4_8 */
+#elif defined(CONFIG_R8A7796)
+ gpio_request(GPIO_FN_SD3_DAT0, NULL); /* GP_4_9 */
+ gpio_request(GPIO_FN_SD3_DAT1, NULL); /* GP_4_10 */
+ gpio_request(GPIO_FN_SD3_DAT2, NULL); /* GP_4_11 */
+ gpio_request(GPIO_FN_SD3_DAT3, NULL); /* GP_4_12 */
+ gpio_request(GPIO_FN_SD3_CLK, NULL); /* GP_4_7 */
+ gpio_request(GPIO_FN_SD3_CMD, NULL); /* GP_4_8 */
+#else
+#error Only R8A7795 and R87796 is supported
+#endif
/* IPSR10 */
gpio_request(GPIO_FN_SD3_CD, NULL);
gpio_request(GPIO_FN_SD3_WP, NULL);
diff --git a/configs/r8a7796_salvator-x_defconfig b/configs/r8a7796_salvator-x_defconfig
new file mode 100644
index 0000000000..d6f1840eab
--- /dev/null
+++ b/configs/r8a7796_salvator-x_defconfig
@@ -0,0 +1,31 @@
+CONFIG_ARM=y
+CONFIG_ARCH_RMOBILE=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_RCAR_GEN3=y
+CONFIG_TARGET_SALVATOR_X=y
+CONFIG_DEFAULT_FDT_FILE=r8a7796-salvator-x.dtb
+CONFIG_VERSION_VARIABLE=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_FDT=y
+CONFIG_R8A7796=y
+CONFIG_SH_SDHI=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_EDITENV=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_NET=y
+CONFIG_CMD_NFS=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_USB=y
+CONFIG_USB=y
+CONFIG_USB_HOST=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_EHCI_RCAR_GEN3=y
+CONFIG_DOS_PARTITION=y
+CONFIG_MMC=y
+CONFIG_GENERIC_MMC=y
+CONFIG_OF_LIBFDT=y
+CONFIG_DM_ETH=y
+CONFIG_RENESAS_RAVB=y
--
2.11.0
More information about the U-Boot
mailing list