[U-Boot] [PATCH v3 01/12] i2c: Drop use of CONFIG_I2C_HARD
Heiko Schocher
hs at denx.de
Mon May 15 04:22:33 UTC 2017
Hello Simon,
Am 13.05.2017 um 05:09 schrieb Simon Glass:
> This option is pretty old. It predates CONFIG_SYS_I2C which is itself
> deprecated in favour of driver model. Disable it for all boards.
>
> Also drop I2C options which depend on this.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
Thanks!
Applied to u-boot-i2c.git master
u-boot-2ic master just testing on travis:
https://travis-ci.org/hsdenx/u-boot-i2c/builds/232288665
bye,
Heiko
>
> Changes in v3: None
> Changes in v2: None
>
> README | 17 +--
> arch/arm/include/asm/arch-armada100/config.h | 12 --
> board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c | 12 +-
> board/cm5200/cm5200.c | 32 ++---
> board/cm5200/cmd_cm5200.c | 32 +----
> board/davedenx/aria/aria.c | 3 -
> board/esd/mecp5123/mecp5123.c | 12 +-
> board/freescale/mpc5121ads/mpc5121ads.c | 21 ----
> board/ifm/ac14xx/ac14xx.c | 53 +-------
> board/renesas/r0p7734/r0p7734.c | 12 +-
> board/tqc/tqm5200/tqm5200.c | 18 +--
> configs/MiniFAP_defconfig | 2 -
> configs/O2D300_defconfig | 1 -
> configs/O2DNT2_RAMBOOT_defconfig | 1 -
> configs/O2DNT2_defconfig | 1 -
> configs/O2D_defconfig | 1 -
> configs/O2I_defconfig | 1 -
> configs/O2MNT_O2M110_defconfig | 1 -
> configs/O2MNT_O2M112_defconfig | 1 -
> configs/O2MNT_O2M113_defconfig | 1 -
> configs/O2MNT_defconfig | 1 -
> configs/O3DNT_defconfig | 1 -
> configs/TQM5200S_HIGHBOOT_defconfig | 2 -
> configs/TQM5200S_defconfig | 2 -
> configs/TQM5200_B_HIGHBOOT_defconfig | 2 -
> configs/TQM5200_B_defconfig | 2 -
> configs/TQM5200_STK100_defconfig | 2 -
> configs/TQM5200_defconfig | 2 -
> configs/a4m072_defconfig | 1 -
> configs/ac14xx_defconfig | 1 -
> configs/ap_sh4a_4a_defconfig | 1 -
> configs/apx4devkit_defconfig | 2 -
> configs/aria_defconfig | 1 -
> configs/aspenite_defconfig | 1 -
> configs/cam5200_defconfig | 2 -
> configs/cam5200_niosflash_defconfig | 2 -
> configs/charon_defconfig | 1 -
> configs/cm5200_defconfig | 1 -
> configs/digsy_mtc_RAMBOOT_defconfig | 2 -
> configs/digsy_mtc_defconfig | 2 -
> configs/digsy_mtc_rev5_RAMBOOT_defconfig | 2 -
> configs/digsy_mtc_rev5_defconfig | 2 -
> configs/fo300_defconfig | 2 -
> configs/gplugd_defconfig | 1 -
> configs/ipek01_defconfig | 2 -
> configs/m28evk_defconfig | 1 -
> configs/mecp5123_defconfig | 2 -
> configs/motionpro_defconfig | 2 -
> configs/mpc5121ads_defconfig | 2 -
> configs/mpc5121ads_rev2_defconfig | 2 -
> configs/pcm030_LOWBOOT_defconfig | 2 -
> configs/pcm030_defconfig | 2 -
> configs/pdm360ng_defconfig | 2 -
> configs/r0p7734_defconfig | 1 -
> configs/v38b_defconfig | 2 -
> include/common.h | 10 ++
> include/configs/M54418TWR.h | 1 -
> include/configs/TQM5200.h | 64 +---------
> include/configs/a4m072.h | 20 ---
> include/configs/ac14xx.h | 18 ---
> include/configs/ap_sh4a_4a.h | 14 ---
> include/configs/apx4devkit.h | 6 -
> include/configs/aria.h | 21 ----
> include/configs/axs10x.h | 2 +-
> include/configs/cm5200.h | 12 +-
> include/configs/digsy_mtc.h | 31 -----
> include/configs/ids8313.h | 1 -
> include/configs/ipek01.h | 23 ----
> include/configs/jupiter.h | 19 ---
> include/configs/m28evk.h | 6 -
> include/configs/manroland/mpc5200-common.h | 176 +++++++++++++++++++++++++++
> include/configs/mecp5123.h | 18 +--
> include/configs/motionpro.h | 22 ----
> include/configs/mpc5121ads.h | 18 ---
> include/configs/mxs.h | 10 --
> include/configs/o2dnt-common.h | 22 ----
> include/configs/pcm030.h | 31 +----
> include/configs/pdm360ng.h | 30 -----
> include/configs/r0p7734.h | 14 ---
> include/configs/s32v234evb.h | 10 --
> include/configs/v38b.h | 21 ----
> 81 files changed, 211 insertions(+), 701 deletions(-)
> create mode 100644 include/configs/manroland/mpc5200-common.h
>
> diff --git a/README b/README
> index 2ca0102b57..86f0814f79 100644
> --- a/README
> +++ b/README
> @@ -2213,22 +2213,9 @@ The following options need to be configured:
> - approved multibus support
> - better i2c mux support
>
> - ** Please consider updating your I2C driver now. **
> + ** CONFIG_HARD_I2C is now being removed **
>
> - These enable legacy I2C serial bus commands. Defining
> - CONFIG_HARD_I2C will include the appropriate I2C driver
> - for the selected CPU.
> -
> - This will allow you to use i2c commands at the u-boot
> - command line (as long as you set CONFIG_CMD_I2C in
> - CONFIG_COMMANDS) and communicate with i2c based realtime
> - clock chips. See common/cmd_i2c.c for a description of the
> - command line interface.
> -
> - CONFIG_HARD_I2C selects a hardware I2C controller.
> -
> - There are several other quantities that must also be
> - defined when you define CONFIG_HARD_I2C.
> +----under removal:
>
> In both cases you will need to define CONFIG_SYS_I2C_SPEED
> to be the frequency (in Hz) at which you wish your i2c bus
> diff --git a/arch/arm/include/asm/arch-armada100/config.h b/arch/arm/include/asm/arch-armada100/config.h
> index 6ebc759f4b..113e1c73f3 100644
> --- a/arch/arm/include/asm/arch-armada100/config.h
> +++ b/arch/arm/include/asm/arch-armada100/config.h
> @@ -24,17 +24,5 @@
> #define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE
> #define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register
> represents UART Unit Enable */
> -/*
> - * I2C definition
> - */
> -#ifdef CONFIG_CMD_I2C
> -#define CONFIG_I2C_MV 1
> -#define CONFIG_MV_I2C_NUM 2
> -#define CONFIG_I2C_MULTI_BUS 1
> -#define CONFIG_MV_I2C_REG {0xd4011000, 0xd4025000}
> -#define CONFIG_HARD_I2C 1
> -#define CONFIG_SYS_I2C_SPEED 0
> -#define CONFIG_SYS_I2C_SLAVE 0xfe
> -#endif
>
> #endif /* _ARMD1_CONFIG_H */
> diff --git a/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c b/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c
> index 31418a1f96..9205c22e0b 100644
> --- a/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c
> +++ b/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c
> @@ -156,17 +156,7 @@ int board_init(void)
>
> int board_late_init(void)
> {
> - u8 mac[6];
> -
> - /* Read Mac Address and set*/
> - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> - i2c_set_bus_num(CONFIG_SYS_I2C_MODULE);
> -
> - /* Read MAC address */
> - i2c_read(0x50, 0x0, 0, mac, 6);
> -
> - if (is_valid_ethaddr(mac))
> - eth_setenv_enetaddr("ethaddr", mac);
> + printf("Cannot use I2C to get MAC address\n");
>
> return 0;
> }
> diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
> index 7b862355c8..2f55191caf 100644
> --- a/board/cm5200/cm5200.c
> +++ b/board/cm5200/cm5200.c
> @@ -161,14 +161,7 @@ int dram_init(void)
> */
> static void read_hw_id(hw_id_t hw_id)
> {
> - int i;
> - for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
> - if (i2c_read(CONFIG_SYS_I2C_EEPROM,
> - hw_id_format[i].offset,
> - 2,
> - (uchar *)&hw_id[i][0],
> - hw_id_format[i].length) != 0)
> - printf("ERROR: can't read HW ID from EEPROM\n");
> + printf("ERROR: can't read HW ID from EEPROM\n");
> }
>
>
> @@ -221,7 +214,7 @@ static void compose_module_name(hw_id_t hw_id, char *buf)
> strcat(buf, tmp);
> }
>
> -
> +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
> /*
> * Compose string with hostname.
> * buf is assumed to have enough space, and be null-terminated.
> @@ -237,7 +230,7 @@ static void compose_hostname(hw_id_t hw_id, char *buf)
> *p = tolower(*p);
>
> }
> -
> +#endif
>
> #ifdef CONFIG_OF_BOARD_SETUP
> /*
> @@ -270,15 +263,6 @@ int checkboard(void)
> hw_id_t hw_id_tmp;
> char module_name_tmp[MODULE_NAME_MAXLEN] = "";
>
> - /*
> - * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
> - * here despite the fact that it will be called again later on. We
> - * also use a little trick to silence I2C-related output.
> - */
> - gd->flags |= GD_FLG_SILENT;
> - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> - gd->flags &= ~GD_FLG_SILENT;
> -
> read_hw_id(hw_id_tmp);
> identify_module(hw_id_tmp); /* this sets gd->board_type */
> compose_module_name(hw_id_tmp, module_name_tmp);
> @@ -334,16 +318,16 @@ int misc_init_r(void)
> " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
> CONFIG_MAC_OFFSET);
> }
> + hostname[0] = 0x00;
> + /* set the hostname appropriate to the module we're running on */
> + compose_hostname(hw_id, hostname);
> + setenv("hostname", hostname);
> +
> #endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) */
> if (!getenv("ethaddr"))
> printf(LOG_PREFIX "MAC address not set, networking is not "
> "operational\n");
>
> - /* set the hostname appropriate to the module we're running on */
> - hostname[0] = 0x00;
> - compose_hostname(hw_id, hostname);
> - setenv("hostname", hostname);
> -
> return 0;
> }
> #endif /* CONFIG_MISC_INIT_R */
> diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
> index 9c40ad7b2a..60097dc8c7 100644
> --- a/board/cm5200/cmd_cm5200.c
> +++ b/board/cm5200/cmd_cm5200.c
> @@ -13,34 +13,6 @@
>
> #ifdef CONFIG_CMD_BSP
>
> -static int do_i2c_test(char * const argv[])
> -{
> - unsigned char temp, temp1;
> -
> - printf("Starting I2C Test\n"
> - "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
> - "Please press any key to start\n\n");
> - getc();
> -
> - temp = 0xf0; /* set io 0-4 as output */
> - i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
> -
> - printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
> - "Press any key to stop\n\n");
> -
> - while (!tstc()) {
> - i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
> - temp1 = (temp >> 4) & 0x03;
> - temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
> - temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
> - temp = temp1;
> - i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
> - }
> - getc();
> -
> - return 0;
> -}
> -
> static int do_usb_test(char * const argv[])
> {
> int i;
> @@ -387,9 +359,7 @@ static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>
> switch (argc) {
> case 2:
> - if (strncmp(argv[1], "i2c", 3) == 0)
> - rcode = do_i2c_test(argv);
> - else if (strncmp(argv[1], "led", 3) == 0)
> + if (strncmp(argv[1], "led", 3) == 0)
> rcode = do_led_test(argv);
> else if (strncmp(argv[1], "usb", 3) == 0)
> rcode = do_usb_test(argv);
> diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c
> index e3441cad4e..e389819e9d 100644
> --- a/board/davedenx/aria/aria.c
> +++ b/board/davedenx/aria/aria.c
> @@ -29,9 +29,6 @@ int misc_init_r(void)
> {
> u32 tmp;
>
> - /* we use I2C-2 for on-board eeprom */
> - i2c_set_bus_num(2);
> -
> tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE);
> printf("FPGA: %u-%u.%u.%u\n",
> (tmp & 0xFF000000) >> 24,
> diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
> index 66dc407bae..78a6b66110 100644
> --- a/board/esd/mecp5123/mecp5123.c
> +++ b/board/esd/mecp5123/mecp5123.c
> @@ -18,17 +18,7 @@ DECLARE_GLOBAL_DATA_PTR;
>
> int eeprom_write_enable(unsigned dev_addr, int state)
> {
> - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
> -
> - if (dev_addr != CONFIG_SYS_I2C_EEPROM_ADDR)
> - return -1;
> -
> - if (state == 0)
> - setbits_be32(&im->gpio.gpdat, 0x00100000);
> - else
> - clrbits_be32(&im->gpio.gpdat, 0x00100000);
> -
> - return 0;
> + return -ENOSYS;
> }
>
> int board_early_init_f(void)
> diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
> index f87579f193..d729056fd0 100644
> --- a/board/freescale/mpc5121ads/mpc5121ads.c
> +++ b/board/freescale/mpc5121ads/mpc5121ads.c
> @@ -174,27 +174,6 @@ int dram_init(void)
>
> int misc_init_r(void)
> {
> - u8 tmp_val;
> -
> - /* Using this for DIU init before the driver in linux takes over
> - * Enable the TFP410 Encoder (I2C address 0x38)
> - */
> -
> - i2c_set_bus_num(2);
> - tmp_val = 0xBF;
> - i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
> - /* Verify if enabled */
> - tmp_val = 0;
> - i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
> - debug("DVI Encoder Read: 0x%02x\n", tmp_val);
> -
> - tmp_val = 0x10;
> - i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
> - /* Verify if enabled */
> - tmp_val = 0;
> - i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
> - debug("DVI Encoder Read: 0x%02x\n", tmp_val);
> -
> return 0;
> }
>
> diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c
> index 348613736d..cd79e804a0 100644
> --- a/board/ifm/ac14xx/ac14xx.c
> +++ b/board/ifm/ac14xx/ac14xx.c
> @@ -17,7 +17,6 @@
> #include <i2c.h>
> #endif
>
> -static int eeprom_diag;
> static int mac_diag;
> static int gpio_diag;
>
> @@ -136,7 +135,6 @@ struct __attribute__ ((__packed__)) eeprom_layout {
> #define HW_COMP_MAINCPU 2
>
> static struct eeprom_layout eeprom_content;
> -static int eeprom_was_read; /* has_been_read */
> static int eeprom_is_valid;
> static int eeprom_version;
>
> @@ -153,53 +151,7 @@ static int eeprom_version;
>
> static int read_eeprom(void)
> {
> - int eeprom_datalen;
> - int ret;
> -
> - if (eeprom_was_read)
> - return 0;
> -
> - eeprom_is_valid = 0;
> - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
> - CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
> - (uchar *)&eeprom_content, sizeof(eeprom_content));
> - if (eeprom_diag) {
> - printf("DIAG: %s() read rc[%d], size[%d]\n",
> - __func__, ret, sizeof(eeprom_content));
> - }
> -
> - if (ret != 0)
> - return -1;
> -
> - eeprom_was_read = 1;
> -
> - /*
> - * check validity of EEPROM content
> - * (check version, length, optionally checksum)
> - */
> - eeprom_is_valid = 1;
> - eeprom_datalen = get_eeprom_field_int(eeprom_content.len);
> - eeprom_version = get_eeprom_field_int(eeprom_content.version);
> -
> - if (eeprom_diag) {
> - printf("DIAG: %s() magic[%c%c%c] len[%d] ver[%d] type[%d]\n",
> - __func__, eeprom_content.magic[0],
> - eeprom_content.magic[1], eeprom_content.magic[2],
> - eeprom_datalen, eeprom_version, eeprom_content.type);
> - }
> - if (strncmp(eeprom_content.magic, "ifm", strlen("ifm")) != 0)
> - eeprom_is_valid = 0;
> - if (eeprom_datalen < sizeof(struct eeprom_layout) - 5)
> - eeprom_is_valid = 0;
> - if ((eeprom_version != 1) && (eeprom_version != 2))
> - eeprom_is_valid = 0;
> - if (eeprom_content.type != HW_COMP_MAINCPU)
> - eeprom_is_valid = 0;
> -
> - if (eeprom_diag)
> - printf("DIAG: %s() valid[%d]\n", __func__, eeprom_is_valid);
> -
> - return ret;
> + return -ENOSYS;
> }
>
> int mac_read_from_eeprom(void)
> @@ -324,9 +276,6 @@ int misc_init_r(void)
> char *s;
> int want_recovery;
>
> - /* we use bus I2C-0 for the on-board eeprom */
> - i2c_set_bus_num(0);
> -
> /* setup GPIO directions and initial values */
> gpio_configure();
>
> diff --git a/board/renesas/r0p7734/r0p7734.c b/board/renesas/r0p7734/r0p7734.c
> index 360e0a1a6f..d0b4537513 100644
> --- a/board/renesas/r0p7734/r0p7734.c
> +++ b/board/renesas/r0p7734/r0p7734.c
> @@ -44,17 +44,7 @@ int board_init(void)
>
> int board_late_init(void)
> {
> - u8 mac[6];
> -
> - /* Read Mac Address and set*/
> - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> - i2c_set_bus_num(CONFIG_SYS_I2C_MODULE);
> -
> - /* Read MAC address */
> - i2c_read(0x50, 0x10, 0, mac, 6);
> -
> - if (is_valid_ethaddr(mac))
> - eth_setenv_enetaddr("ethaddr", mac);
> + printf("Cannot get MAC address from I2C\n");
>
> return 0;
> }
> diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
> index 92db093dbf..c48ab11fc4 100644
> --- a/board/tqc/tqm5200/tqm5200.c
> +++ b/board/tqc/tqm5200/tqm5200.c
> @@ -486,20 +486,14 @@ int board_early_init_f (void)
>
> static int tfp410_read_reg(int reg, uchar *buf)
> {
> - if (i2c_read(CONFIG_SYS_TFP410_ADDR, reg, 1, buf, 1) != 0) {
> - puts ("Error reading the chip.\n");
> - return 1;
> - }
> - return 0;
> + puts("Error reading the chip.\n");
> + return -ENOSYS;
> }
>
> static int tfp410_write_reg(int reg, uchar buf)
> {
> - if (i2c_write(CONFIG_SYS_TFP410_ADDR, reg, 1, &buf, 1) != 0) {
> - puts ("Error writing the chip.\n");
> - return 1;
> - }
> - return 0;
> + puts("Error writing the chip.\n");
> + return -ENOSYS;
> }
>
> typedef struct _tfp410_config {
> @@ -525,12 +519,9 @@ static int charon_last_stage_init(void)
> {
> volatile struct mpc5xxx_lpb *lpb =
> (struct mpc5xxx_lpb *) MPC5XXX_LPB;
> - int oldbus = i2c_get_bus_num();
> uchar buf;
> int i = 0;
>
> - i2c_set_bus_num(CONFIG_SYS_TFP410_BUS);
> -
> /* check version */
> if (tfp410_read_reg(TFP410_REG_DEV_ID_H, &buf) != 0)
> return -1;
> @@ -551,7 +542,6 @@ static int charon_last_stage_init(void)
> i++;
> }
> printf("TFP410 initialized.\n");
> - i2c_set_bus_num(oldbus);
>
> /* set deadcycle for cs3 to 0 */
> setbits_be32(&lpb->cs_deadcycle, 0xffffcfff);
> diff --git a/configs/MiniFAP_defconfig b/configs/MiniFAP_defconfig
> index 7d719f81f5..02ca577e28 100644
> --- a/configs/MiniFAP_defconfig
> +++ b/configs/MiniFAP_defconfig
> @@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/O2D300_defconfig b/configs/O2D300_defconfig
> index 38101f05df..c0e9541b87 100644
> --- a/configs/O2D300_defconfig
> +++ b/configs/O2D300_defconfig
> @@ -4,7 +4,6 @@ CONFIG_TARGET_O2D300=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2DNT2_RAMBOOT_defconfig b/configs/O2DNT2_RAMBOOT_defconfig
> index 83006e5582..8cff44cf36 100644
> --- a/configs/O2DNT2_RAMBOOT_defconfig
> +++ b/configs/O2DNT2_RAMBOOT_defconfig
> @@ -8,7 +8,6 @@ CONFIG_HUSH_PARSER=y
> CONFIG_AUTOBOOT_KEYED=y
> CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n"
> CONFIG_AUTOBOOT_STOP_STR="++++++++++"
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2DNT2_defconfig b/configs/O2DNT2_defconfig
> index 4202d85203..f29abb83bc 100644
> --- a/configs/O2DNT2_defconfig
> +++ b/configs/O2DNT2_defconfig
> @@ -7,7 +7,6 @@ CONFIG_HUSH_PARSER=y
> CONFIG_AUTOBOOT_KEYED=y
> CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n"
> CONFIG_AUTOBOOT_STOP_STR="++++++++++"
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2D_defconfig b/configs/O2D_defconfig
> index b84a1c8839..534cfe12e2 100644
> --- a/configs/O2D_defconfig
> +++ b/configs/O2D_defconfig
> @@ -4,7 +4,6 @@ CONFIG_TARGET_O2D=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2I_defconfig b/configs/O2I_defconfig
> index efcc769ff4..acf42abe29 100644
> --- a/configs/O2I_defconfig
> +++ b/configs/O2I_defconfig
> @@ -4,7 +4,6 @@ CONFIG_TARGET_O2I=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2MNT_O2M110_defconfig b/configs/O2MNT_O2M110_defconfig
> index abdc53df21..de647c76b9 100644
> --- a/configs/O2MNT_O2M110_defconfig
> +++ b/configs/O2MNT_O2M110_defconfig
> @@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
> CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M110\""
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2MNT_O2M112_defconfig b/configs/O2MNT_O2M112_defconfig
> index 06089fe3cf..b243e9cc0e 100644
> --- a/configs/O2MNT_O2M112_defconfig
> +++ b/configs/O2MNT_O2M112_defconfig
> @@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
> CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M112\""
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2MNT_O2M113_defconfig b/configs/O2MNT_O2M113_defconfig
> index 1ea3f3a09b..1584058289 100644
> --- a/configs/O2MNT_O2M113_defconfig
> +++ b/configs/O2MNT_O2M113_defconfig
> @@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
> CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M113\""
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O2MNT_defconfig b/configs/O2MNT_defconfig
> index 0209085605..20bd31466e 100644
> --- a/configs/O2MNT_defconfig
> +++ b/configs/O2MNT_defconfig
> @@ -4,7 +4,6 @@ CONFIG_TARGET_O2MNT=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/O3DNT_defconfig b/configs/O3DNT_defconfig
> index 5ce4140859..ea769e7edc 100644
> --- a/configs/O3DNT_defconfig
> +++ b/configs/O3DNT_defconfig
> @@ -4,7 +4,6 @@ CONFIG_TARGET_O3DNT=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/TQM5200S_HIGHBOOT_defconfig b/configs/TQM5200S_HIGHBOOT_defconfig
> index d0cd50a63c..d07596add0 100644
> --- a/configs/TQM5200S_HIGHBOOT_defconfig
> +++ b/configs/TQM5200S_HIGHBOOT_defconfig
> @@ -7,7 +7,6 @@ CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -15,7 +14,6 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/TQM5200S_defconfig b/configs/TQM5200S_defconfig
> index 5324a9a11c..af3225554b 100644
> --- a/configs/TQM5200S_defconfig
> +++ b/configs/TQM5200S_defconfig
> @@ -7,7 +7,6 @@ CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -15,7 +14,6 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/TQM5200_B_HIGHBOOT_defconfig b/configs/TQM5200_B_HIGHBOOT_defconfig
> index 2f933e6cab..37d6767f28 100644
> --- a/configs/TQM5200_B_HIGHBOOT_defconfig
> +++ b/configs/TQM5200_B_HIGHBOOT_defconfig
> @@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/TQM5200_B_defconfig b/configs/TQM5200_B_defconfig
> index f204484f59..5e0cf9ea47 100644
> --- a/configs/TQM5200_B_defconfig
> +++ b/configs/TQM5200_B_defconfig
> @@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/TQM5200_STK100_defconfig b/configs/TQM5200_STK100_defconfig
> index db9bb8a30d..7b4b030d74 100644
> --- a/configs/TQM5200_STK100_defconfig
> +++ b/configs/TQM5200_STK100_defconfig
> @@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/TQM5200_defconfig b/configs/TQM5200_defconfig
> index eec60f1be4..4792639653 100644
> --- a/configs/TQM5200_defconfig
> +++ b/configs/TQM5200_defconfig
> @@ -9,7 +9,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -18,7 +17,6 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/a4m072_defconfig b/configs/a4m072_defconfig
> index ce5edcbf01..0054d4cddb 100644
> --- a/configs/a4m072_defconfig
> +++ b/configs/a4m072_defconfig
> @@ -7,7 +7,6 @@ CONFIG_HUSH_PARSER=y
> CONFIG_AUTOBOOT_KEYED=y
> CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n"
> CONFIG_AUTOBOOT_DELAY_STR="asdfg"
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> diff --git a/configs/ac14xx_defconfig b/configs/ac14xx_defconfig
> index e3b7793e04..930ec8acf2 100644
> --- a/configs/ac14xx_defconfig
> +++ b/configs/ac14xx_defconfig
> @@ -5,7 +5,6 @@ CONFIG_FIT=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_SYS_PROMPT="ac14xx> "
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig
> index 75cf53fe21..41c8be9120 100644
> --- a/configs/ap_sh4a_4a_defconfig
> +++ b/configs/ap_sh4a_4a_defconfig
> @@ -13,7 +13,6 @@ CONFIG_VERSION_VARIABLE=y
> # CONFIG_CMD_ENV_EXISTS is not set
> # CONFIG_CMD_LOADB is not set
> # CONFIG_CMD_LOADS is not set
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_FPGA is not set
> # CONFIG_CMD_ECHO is not set
> # CONFIG_CMD_ITEST is not set
> diff --git a/configs/apx4devkit_defconfig b/configs/apx4devkit_defconfig
> index e2061a2cce..5c30fe3ce7 100644
> --- a/configs/apx4devkit_defconfig
> +++ b/configs/apx4devkit_defconfig
> @@ -14,14 +14,12 @@ CONFIG_HUSH_PARSER=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_MMC=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_CACHE=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_UBI=y
> diff --git a/configs/aria_defconfig b/configs/aria_defconfig
> index 963661ab2d..0f1432f9a8 100644
> --- a/configs/aria_defconfig
> +++ b/configs/aria_defconfig
> @@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> diff --git a/configs/aspenite_defconfig b/configs/aspenite_defconfig
> index 26654426ed..0ac39eabd2 100644
> --- a/configs/aspenite_defconfig
> +++ b/configs/aspenite_defconfig
> @@ -6,7 +6,6 @@ CONFIG_BOOTDELAY=3
> CONFIG_BOARD_EARLY_INIT_F=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> # CONFIG_CMD_NET is not set
> # CONFIG_CMD_NFS is not set
> diff --git a/configs/cam5200_defconfig b/configs/cam5200_defconfig
> index 92985ab3d6..46a24f56ab 100644
> --- a/configs/cam5200_defconfig
> +++ b/configs/cam5200_defconfig
> @@ -7,14 +7,12 @@ CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_MAC_PARTITION=y
> CONFIG_DOS_PARTITION=y
> CONFIG_ISO_PARTITION=y
> diff --git a/configs/cam5200_niosflash_defconfig b/configs/cam5200_niosflash_defconfig
> index 32bc58ee9b..6b9877ff21 100644
> --- a/configs/cam5200_niosflash_defconfig
> +++ b/configs/cam5200_niosflash_defconfig
> @@ -7,14 +7,12 @@ CONFIG_BOOTDELAY=5
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_MAC_PARTITION=y
> CONFIG_DOS_PARTITION=y
> CONFIG_ISO_PARTITION=y
> diff --git a/configs/charon_defconfig b/configs/charon_defconfig
> index ec22a6368f..8a1429037a 100644
> --- a/configs/charon_defconfig
> +++ b/configs/charon_defconfig
> @@ -9,7 +9,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> diff --git a/configs/cm5200_defconfig b/configs/cm5200_defconfig
> index 7d8d01aaaa..d3369f4455 100644
> --- a/configs/cm5200_defconfig
> +++ b/configs/cm5200_defconfig
> @@ -6,7 +6,6 @@ CONFIG_BOOTDELAY=5
> CONFIG_SILENT_CONSOLE=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> diff --git a/configs/digsy_mtc_RAMBOOT_defconfig b/configs/digsy_mtc_RAMBOOT_defconfig
> index 0d11eec75a..86b2b0d804 100644
> --- a/configs/digsy_mtc_RAMBOOT_defconfig
> +++ b/configs/digsy_mtc_RAMBOOT_defconfig
> @@ -13,7 +13,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
> CONFIG_AUTOBOOT_DELAY_STR="d"
> CONFIG_AUTOBOOT_STOP_STR=" "
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -21,7 +20,6 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_CACHE=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/digsy_mtc_defconfig b/configs/digsy_mtc_defconfig
> index dc17ab4406..85b7f850f7 100644
> --- a/configs/digsy_mtc_defconfig
> +++ b/configs/digsy_mtc_defconfig
> @@ -11,7 +11,6 @@ CONFIG_AUTOBOOT_KEYED=y
> CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n"
> CONFIG_AUTOBOOT_DELAY_STR=" "
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -19,7 +18,6 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_CACHE=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/digsy_mtc_rev5_RAMBOOT_defconfig b/configs/digsy_mtc_rev5_RAMBOOT_defconfig
> index 4ab11c755b..7ec8650aca 100644
> --- a/configs/digsy_mtc_rev5_RAMBOOT_defconfig
> +++ b/configs/digsy_mtc_rev5_RAMBOOT_defconfig
> @@ -13,7 +13,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
> CONFIG_AUTOBOOT_DELAY_STR="d"
> CONFIG_AUTOBOOT_STOP_STR=" "
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -21,7 +20,6 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_CACHE=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/digsy_mtc_rev5_defconfig b/configs/digsy_mtc_rev5_defconfig
> index 1f3f3c8bb6..b4b8533063 100644
> --- a/configs/digsy_mtc_rev5_defconfig
> +++ b/configs/digsy_mtc_rev5_defconfig
> @@ -13,7 +13,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
> CONFIG_AUTOBOOT_DELAY_STR="d"
> CONFIG_AUTOBOOT_STOP_STR=" "
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -21,7 +20,6 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_CACHE=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/fo300_defconfig b/configs/fo300_defconfig
> index b4f334a436..00418153be 100644
> --- a/configs/fo300_defconfig
> +++ b/configs/fo300_defconfig
> @@ -12,7 +12,6 @@ CONFIG_BOARD_EARLY_INIT_F=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> @@ -21,7 +20,6 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_SNTP=y
> CONFIG_CMD_BMP=y
> CONFIG_CMD_BSP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> diff --git a/configs/gplugd_defconfig b/configs/gplugd_defconfig
> index 97bb976803..f44b68dae8 100644
> --- a/configs/gplugd_defconfig
> +++ b/configs/gplugd_defconfig
> @@ -6,7 +6,6 @@ CONFIG_BOOTDELAY=3
> CONFIG_BOARD_EARLY_INIT_F=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_FPGA is not set
> # CONFIG_CMD_SETEXPR is not set
> diff --git a/configs/ipek01_defconfig b/configs/ipek01_defconfig
> index cac9326b6c..690bc0f461 100644
> --- a/configs/ipek01_defconfig
> +++ b/configs/ipek01_defconfig
> @@ -7,13 +7,11 @@ CONFIG_BOOTDELAY=5
> # CONFIG_CONSOLE_MUX is not set
> CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> CONFIG_LOOPW=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_BMP=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_FAT=y
> # CONFIG_MMC is not set
> CONFIG_MTD_NOR_FLASH=y
> diff --git a/configs/m28evk_defconfig b/configs/m28evk_defconfig
> index 6acbd77d5f..0ab7f6bb3c 100644
> --- a/configs/m28evk_defconfig
> +++ b/configs/m28evk_defconfig
> @@ -22,7 +22,6 @@ CONFIG_CMD_GREPENV=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_DHCP=y
> diff --git a/configs/mecp5123_defconfig b/configs/mecp5123_defconfig
> index ebf5415464..db52077e1a 100644
> --- a/configs/mecp5123_defconfig
> +++ b/configs/mecp5123_defconfig
> @@ -6,12 +6,10 @@ CONFIG_BOOTDELAY=5
> CONFIG_BOARD_EARLY_INIT_F=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_FAT=y
> # CONFIG_MMC is not set
> CONFIG_MTD_NOR_FLASH=y
> diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig
> index 91384a6259..5040ea5742 100644
> --- a/configs/motionpro_defconfig
> +++ b/configs/motionpro_defconfig
> @@ -8,12 +8,10 @@ CONFIG_AUTOBOOT_KEYED=y
> CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
> CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_BEDBUG=y
> CONFIG_LED_STATUS=y
> diff --git a/configs/mpc5121ads_defconfig b/configs/mpc5121ads_defconfig
> index c0af8127b5..47c4e5ace7 100644
> --- a/configs/mpc5121ads_defconfig
> +++ b/configs/mpc5121ads_defconfig
> @@ -6,13 +6,11 @@ CONFIG_BOOTDELAY=5
> CONFIG_BOARD_EARLY_INIT_F=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_MAC_PARTITION=y
> diff --git a/configs/mpc5121ads_rev2_defconfig b/configs/mpc5121ads_rev2_defconfig
> index ad46e02e94..ef700d0773 100644
> --- a/configs/mpc5121ads_rev2_defconfig
> +++ b/configs/mpc5121ads_rev2_defconfig
> @@ -7,13 +7,11 @@ CONFIG_BOOTDELAY=5
> CONFIG_BOARD_EARLY_INIT_F=y
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_EXT2=y
> CONFIG_CMD_FAT=y
> CONFIG_MAC_PARTITION=y
> diff --git a/configs/pcm030_LOWBOOT_defconfig b/configs/pcm030_LOWBOOT_defconfig
> index d19908ca8f..2933326e5d 100644
> --- a/configs/pcm030_LOWBOOT_defconfig
> +++ b/configs/pcm030_LOWBOOT_defconfig
> @@ -4,11 +4,9 @@ CONFIG_TARGET_PCM030=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000"
> CONFIG_BOOTDELAY=3
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> -CONFIG_CMD_DATE=y
> # CONFIG_MMC is not set
> CONFIG_MTD_NOR_FLASH=y
> CONFIG_USB=y
> diff --git a/configs/pcm030_defconfig b/configs/pcm030_defconfig
> index ef5c85888c..ff9f4e9f4f 100644
> --- a/configs/pcm030_defconfig
> +++ b/configs/pcm030_defconfig
> @@ -4,11 +4,9 @@ CONFIG_TARGET_PCM030=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_BOOTDELAY=3
> CONFIG_SYS_PROMPT="uboot> "
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> -CONFIG_CMD_DATE=y
> # CONFIG_MMC is not set
> CONFIG_MTD_NOR_FLASH=y
> CONFIG_USB=y
> diff --git a/configs/pdm360ng_defconfig b/configs/pdm360ng_defconfig
> index f45a90caf9..4ef0df1aa8 100644
> --- a/configs/pdm360ng_defconfig
> +++ b/configs/pdm360ng_defconfig
> @@ -10,13 +10,11 @@ CONFIG_SILENT_CONSOLE=y
> # CONFIG_CONSOLE_MUX is not set
> CONFIG_HUSH_PARSER=y
> CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_BMP=y
> -CONFIG_CMD_DATE=y
> # CONFIG_MMC is not set
> CONFIG_MTD_NOR_FLASH=y
> # CONFIG_PCI is not set
> diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig
> index c5c3d52718..91b08dc24f 100644
> --- a/configs/r0p7734_defconfig
> +++ b/configs/r0p7734_defconfig
> @@ -13,7 +13,6 @@ CONFIG_VERSION_VARIABLE=y
> # CONFIG_CMD_ENV_EXISTS is not set
> # CONFIG_CMD_LOADB is not set
> # CONFIG_CMD_LOADS is not set
> -CONFIG_CMD_I2C=y
> # CONFIG_CMD_FPGA is not set
> # CONFIG_CMD_ECHO is not set
> # CONFIG_CMD_ITEST is not set
> diff --git a/configs/v38b_defconfig b/configs/v38b_defconfig
> index db4c47c3d2..18dc039d93 100644
> --- a/configs/v38b_defconfig
> +++ b/configs/v38b_defconfig
> @@ -3,13 +3,11 @@ CONFIG_MPC5xxx=y
> CONFIG_TARGET_V38B=y
> CONFIG_BOOTDELAY=3
> CONFIG_BOARD_EARLY_INIT_F=y
> -CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> -CONFIG_CMD_DATE=y
> CONFIG_CMD_FAT=y
> CONFIG_CMD_DIAG=y
> CONFIG_MAC_PARTITION=y
> diff --git a/include/common.h b/include/common.h
> index 83e4037a86..45f190a600 100644
> --- a/include/common.h
> +++ b/include/common.h
> @@ -499,9 +499,19 @@ void reset_phy (void);
> void fdc_hw_init (void);
>
> /* $(BOARD)/eeprom.c */
> +#ifdef CONFIG_CMD_EEPROM
> void eeprom_init (int bus);
> int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
> int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
> +#else
> +/*
> + * Some EEPROM code is depecated because it used the legacy I2C interface. Add
> + * some macros here so we don't have to touch every one of those uses
> + */
> +#define eeprom_init(bus)
> +#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
> +#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
> +#endif
>
> /*
> * Set this up regardless of board
> diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
> index 1817571efe..7b162cccef 100644
> --- a/include/configs/M54418TWR.h
> +++ b/include/configs/M54418TWR.h
> @@ -166,7 +166,6 @@
>
> /* I2c */
> #undef CONFIG_SYS_FSL_I2C
> -#undef CONFIG_HARD_I2C /* I2C with hardware support */
> #undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
> /* I2C speed and slave address */
> #define CONFIG_SYS_I2C_SPEED 80000
> diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
> index 13f4ef67e1..19e0b1be1b 100644
> --- a/include/configs/TQM5200.h
> +++ b/include/configs/TQM5200.h
> @@ -124,8 +124,7 @@
> #ifndef CONFIG_CAM5200
> /* POST support */
> #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
> - CONFIG_SYS_POST_CPU | \
> - CONFIG_SYS_POST_I2C)
> + CONFIG_SYS_POST_CPU)
> #endif
>
> #ifdef CONFIG_POST
> @@ -144,7 +143,6 @@
> /*
> * Command line configuration.
> */
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_JFFS2
> #define CONFIG_CMD_REGINFO
>
> @@ -278,54 +276,6 @@
> #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
> #endif
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#ifdef CONFIG_TQM5200_REV100
> -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
> -#else
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
> -#endif
> -
> -/*
> - * I2C clock frequency
> - *
> - * Please notice, that the resulting clock frequency could differ from the
> - * configured value. This is because the I2C clock is derived from system
> - * clock over a frequency divider with only a few divider values. U-Boot
> - * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
> - * approximation allways lies below the configured value, never above.
> - */
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
> - * also). For other EEPROMs configuration should be verified. On Mini-FAP the
> - * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
> - * same configuration could be used.
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
> -
> -/*
> - * HW-Monitor configuration on Mini-FAP
> - */
> -#if defined (CONFIG_MINIFAP)
> -#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C
> -#endif
> -
> -/* List of I2C addresses to be verified by POST */
> -#if defined (CONFIG_MINIFAP)
> -#undef CONFIG_SYS_POST_I2C_ADDRS
> -#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
> - CONFIG_SYS_I2C_HWMON_ADDR, \
> - CONFIG_SYS_I2C_SLAVE}
> -#endif
> -
> /*
> * Flash configuration
> */
> @@ -544,18 +494,6 @@
> #endif
> #endif
>
> -/*
> - * RTC configuration
> - */
> -#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
> -# define CONFIG_RTC_M41T11 1
> -# define CONFIG_SYS_I2C_RTC_ADDR 0x68
> -# define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* because Linux uses the same base
> - year */
> -#else
> -# define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
> -#endif
> -
> /*
> * Miscellaneous configurable options
> */
> diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
> index 79099518e7..2ea43ffce1 100644
> --- a/include/configs/a4m072.h
> +++ b/include/configs/a4m072.h
> @@ -81,7 +81,6 @@
> /*
> * Command line configuration.
> */
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_IDE
>
> #if defined(CONFIG_PCI)
> @@ -145,25 +144,6 @@
> */
> #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
> -
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010010x */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
> -#define CONFIG_SYS_EEPROM_WREN 1
> -#define CONFIG_SYS_EEPROM_WP GPIO_PSC2_4
> -
> /*
> * Flash configuration
> */
> diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
> index ee015bb83d..2a46e9b864 100644
> --- a/include/configs/ac14xx.h
> +++ b/include/configs/ac14xx.h
> @@ -336,28 +336,11 @@
>
> #define CONFIG_CMDLINE_EDITING 1 /* command line history */
>
> -/* I2C */
> -#define CONFIG_HARD_I2C /* I2C with hardware support */
> -#define CONFIG_I2C_MULTI_BUS
> -
> -/* I2C speed and slave address */
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> /*
> * IIM - IC Identification Module
> */
> #undef CONFIG_FSL_IIM
>
> -/*
> - * EEPROM configuration for Atmel AT24C01:
> - * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 30
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
> -
> /*
> * Ethernet configuration
> */
> @@ -384,7 +367,6 @@
> #define CONFIG_LOADS_ECHO 1
> #define CONFIG_SYS_LOADS_BAUD_CHANGE 1
>
> -#define CONFIG_CMD_EEPROM
> #undef CONFIG_CMD_FUSE
> #undef CONFIG_CMD_IDE
> #define CONFIG_CMD_JFFS2
> diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
> index 5f5882dc8e..d3d72b634d 100644
> --- a/include/configs/ap_sh4a_4a.h
> +++ b/include/configs/ap_sh4a_4a.h
> @@ -35,20 +35,6 @@
> #define CONFIG_BITBANGMII
> #define CONFIG_BITBANGMII_MULTI
>
> -/* I2C */
> -#define CONFIG_SH_SH7734_I2C 1
> -#define CONFIG_HARD_I2C 1
> -#define CONFIG_I2C_MULTI_BUS 1
> -#define CONFIG_SYS_MAX_I2C_BUS 2
> -#define CONFIG_SYS_I2C_MODULE 0
> -#define CONFIG_SYS_I2C_SPEED 400000 /* 400 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x50
> -#define CONFIG_SH_I2C_DATA_HIGH 4
> -#define CONFIG_SH_I2C_DATA_LOW 5
> -#define CONFIG_SH_I2C_CLOCK 500000000
> -#define CONFIG_SH_I2C_BASE0 0xFFC70000
> -#define CONFIG_SH_I2C_BASE1 0xFFC71000
> -
> /* undef to save memory */
> #define CONFIG_SYS_LONGHELP
> /* Monitor Command Prompt */
> diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
> index a4c7847dab..cce39f27c7 100644
> --- a/include/configs/apx4devkit.h
> +++ b/include/configs/apx4devkit.h
> @@ -79,12 +79,6 @@
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> #endif
>
> -/* RTC */
> -#ifdef CONFIG_CMD_DATE
> -#define CONFIG_RTC_PCF8563
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x51
> -#endif
> -
> /* Boot Linux */
> #define CONFIG_BOOTFILE "uImage"
> #define CONFIG_BOOTCOMMAND "run bootcmd_nand"
> diff --git a/include/configs/aria.h b/include/configs/aria.h
> index 94f6605d46..4d946fc44a 100644
> --- a/include/configs/aria.h
> +++ b/include/configs/aria.h
> @@ -340,31 +340,11 @@
>
> #endif
>
> -/* I2C */
> -#define CONFIG_HARD_I2C /* I2C with hardware support */
> -#define CONFIG_I2C_MULTI_BUS
> -
> -/* I2C speed and slave address */
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -#if 0
> -#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
> -#endif
> -
> /*
> * IIM - IC Identification Module
> */
> #undef CONFIG_FSL_IIM
>
> -/*
> - * EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
> - * 16-bit addresses, 10ms write delay, 32-Byte Page Write Mode
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
> -
> /*
> * Ethernet configuration
> */
> @@ -392,7 +372,6 @@
> #define CONFIG_LOADS_ECHO 1
> #define CONFIG_SYS_LOADS_BAUD_CHANGE 1
>
> -#define CONFIG_CMD_EEPROM
> #undef CONFIG_CMD_FUSE
> #undef CONFIG_CMD_IDE
> #define CONFIG_CMD_JFFS2
> diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h
> index 768e8fbfa4..66e8cd5e9a 100644
> --- a/include/configs/axs10x.h
> +++ b/include/configs/axs10x.h
> @@ -100,7 +100,7 @@
> /*
> * Environment settings
> */
> -#define CONFIG_ENV_IS_IN_EEPROM
> +#define CONFIG_ENV_IS_NOWHERE
> #define CONFIG_ENV_SIZE SZ_512
> #define CONFIG_ENV_OFFSET 0
>
> diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
> index 0073cb5373..3a7d826837 100644
> --- a/include/configs/cm5200.h
> +++ b/include/configs/cm5200.h
> @@ -44,7 +44,7 @@
> /*
> * POST support
> */
> -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
> +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU)
> #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
> /* List of I2C addresses to be verified by POST */
> #define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \
> @@ -199,16 +199,6 @@
> "2m(kernel),27904k(rootfs)," \
> "-(config)"
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 */
> -#define CONFIG_SYS_I2C_SPEED 40000 /* 40 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x0
> -#define CONFIG_SYS_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */
> -#define CONFIG_SYS_I2C_EEPROM 0x53 /* I2C EEPROM device address */
> -
> /*
> * RTC configuration
> */
> diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
> index 2b56945dd9..ab546c50cd 100644
> --- a/include/configs/digsy_mtc.h
> +++ b/include/configs/digsy_mtc.h
> @@ -85,7 +85,6 @@
> /*
> * Command line configuration.
> */
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_IDE
> #define CONFIG_CMD_IRQ
> #define CONFIG_CMD_PCI
> @@ -205,36 +204,6 @@
>
> #define CONFIG_BOOTCOMMAND "run mtcb_start"
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1
> -#define CONFIG_SYS_I2C_MODULE 1
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
> -
> -/*
> - * RTC configuration
> - */
> -#if defined(CONFIG_DIGSY_REV5)
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x56
> -#define CONFIG_RTC_RV3029
> -/* Enable 5k Ohm trickle charge resistor */
> -#define CONFIG_SYS_RV3029_TCR 0x20
> -#else
> -#define CONFIG_RTC_DS1337
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x68
> -#define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */
> -#endif
> -
> /*
> * Flash configuration
> */
> diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
> index 6b6bbbd5c0..7ffc9d1dd9 100644
> --- a/include/configs/ids8313.h
> +++ b/include/configs/ids8313.h
> @@ -165,7 +165,6 @@
> #define CONFIG_TSEC2
> #define CONFIG_TSEC_ENET
> #define CONFIG_HARD_SPI
> -#define CONFIG_HARD_I2C
>
> /*
> * NOR FLASH setup
> diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
> index aff4adf5d0..ece72c6aa1 100644
> --- a/include/configs/ipek01.h
> +++ b/include/configs/ipek01.h
> @@ -150,29 +150,6 @@
> #define OF_SOC "soc5200 at f0000000"
> #define OF_TBCLK (bd->bi_busfreq / 4)
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
> -
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
> -
> -/*
> - * RTC configuration
> - */
> -#define CONFIG_RTC_PCF8563
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x51
> -
> #define CONFIG_SYS_FLASH_BASE 0xFC000000
> #define CONFIG_SYS_FLASH_SIZE 0x01000000
> #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
> diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
> index 0d97317c7f..4461623118 100644
> --- a/include/configs/jupiter.h
> +++ b/include/configs/jupiter.h
> @@ -127,25 +127,6 @@
> #define OF_STDOUT_PATH "/soc5200 at f0000000/serial at 2000"
> #endif
>
> -#if 0
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
> -
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
> -#endif
> -
> /*
> * Flash configuration
> */
> diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> index f6fa599e6b..c4717238bb 100644
> --- a/include/configs/m28evk.h
> +++ b/include/configs/m28evk.h
> @@ -16,7 +16,6 @@
> /* U-Boot Commands */
> #define CONFIG_FAT_WRITE
>
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_NAND
> #define CONFIG_CMD_NAND_TRIMFFS
>
> @@ -63,11 +62,6 @@
> #define CONFIG_FEC_MXC
> #endif
>
> -/* EEPROM */
> -#ifdef CONFIG_CMD_EEPROM
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> -#endif
> -
> /* RTC */
> #ifdef CONFIG_CMD_DATE
> /* Use the internal RTC in the MXS chip */
> diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
> new file mode 100644
> index 0000000000..68874dc029
> --- /dev/null
> +++ b/include/configs/manroland/mpc5200-common.h
> @@ -0,0 +1,176 @@
> +/*
> + * (C) Copyright 2009
> + * Heiko Schocher, DENX Software Engineering, hs at denx.de.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __MANROLAND_MPC52XX__COMMON_H
> +#define __MANROLAND_MPC52XX__COMMON_H
> +
> +/*
> + * High Level Configuration Options
> + * (easy to change)
> + */
> +#define CONFIG_MPC5200 1 /* MPC5200 CPU */
> +
> +/* ... running at 33.000000MHz */
> +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
> +
> +#define CONFIG_HIGH_BATS 1 /* High BATs supported */
> +
> +/*
> + * Serial console configuration
> + */
> +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
> +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\
> + 230400 }
> +
> +#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */
> +# define CONFIG_SYS_LOWBOOT 1
> +#endif
> +
> +/*
> + * IPB Bus clocking configuration.
> + */
> +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
> +
> +/*
> + * Flash configuration
> + */
> +#define CONFIG_SYS_FLASH_BASE 0xFF800000
> +
> +#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
> +
> +#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
> +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
> + (= chip selects) */
> +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/
> +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout [ms]*/
> +
> +#define CONFIG_FLASH_CFI_DRIVER
> +#define CONFIG_SYS_FLASH_CFI
> +#define CONFIG_SYS_FLASH_EMPTY_INFO
> +#define CONFIG_SYS_FLASH_CFI_AMD_RESET
> +
> +/*
> + * Environment settings
> + */
> +#define CONFIG_ENV_IS_IN_FLASH 1
> +#define CONFIG_ENV_SIZE 0x4000
> +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
> +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
> +
> +/*
> + * Memory map
> + */
> +#define CONFIG_SYS_MBAR 0xF0000000
> +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
> +
> +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\
> + GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x00000000
> +#define CONFIG_SYS_SRAM_BASE 0x80100000 /* CS 1 */
> +#define CONFIG_SYS_DISPLAY_BASE 0x80600000 /* CS 3 */
> +
> +/* Settings for XLB = 132 MHz */
> +#define SDRAM_DDR 1
> +#define SDRAM_MODE 0x018D0000
> +#define SDRAM_EMODE 0x40090000
> +#define SDRAM_CONTROL 0x714f0f00
> +#define SDRAM_CONFIG1 0x73722930
> +#define SDRAM_CONFIG2 0x47770000
> +#define SDRAM_TAPDELAY 0x10000000
> +
> +/* Use ON-Chip SRAM until RAM will be available */
> +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
> +#ifdef CONFIG_POST
> +/* preserve space for the post_word at end of on-chip SRAM */
> +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
> +#else
> +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
> +#endif
> +
> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
> +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
> +# define CONFIG_SYS_RAMBOOT 1
> +#endif
> +
> +#define CONFIG_SYS_MONITOR_LEN (192 << 10)
> +#define CONFIG_SYS_MALLOC_LEN (512 << 10)
> +#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
> +
> +/*
> + * Ethernet configuration
> + */
> +#define CONFIG_MPC5xxx_FEC 1
> +#define CONFIG_MPC5xxx_FEC_MII100
> +#define CONFIG_PHY_ADDR 0x00
> +#define CONFIG_MII 1
> +
> +/*use Hardware WDT */
> +#define CONFIG_HW_WATCHDOG
> +
> +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
> +#if defined(CONFIG_CMD_KGDB)
> +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
> +#endif
> +
> +/*
> + * Various low-level settings
> + */
> +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
> +#define CONFIG_SYS_HID0_FINAL HID0_ICE
> +
> +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
> +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
> +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
> +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
> +
> +/* 8Mbit SRAM @0x80100000 */
> +#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE
> +
> +#define CONFIG_SYS_CS_BURST 0x00000000
> +#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
> +
> +/*-----------------------------------------------------------------------
> + * IDE/ATA stuff Supports IDE harddisk
> + *-----------------------------------------------------------------------
> + */
> +
> +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
> +
> +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
> +#undef CONFIG_IDE_LED /* LED for ide not supported */
> +
> +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
> +
> +#define CONFIG_IDE_PREINIT 1
> +
> +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
> +
> +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
> +
> +/* Offset for data I/O */
> +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
> +
> +/* Offset for normal register accesses */
> +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
> +
> +/* Offset for alternate registers */
> +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
> +
> +/* Interval between registers */
> +#define CONFIG_SYS_ATA_STRIDE 4
> +
> +#define CONFIG_ATAPI 1
> +
> +#define OF_CPU "PowerPC,5200 at 0"
> +#define OF_SOC "soc5200 at f0000000"
> +#define OF_TBCLK (bd->bi_busfreq / 4)
> +#define OF_STDOUT_PATH "/soc5200 at f0000000/serial at 2000"
> +#define CONFIG_OF_IDE_FIXUP
> +
> +#endif /* __MANROLAND_MPC52XX__COMMON_H */
> diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
> index 1a9cb675df..fe94e663c5 100644
> --- a/include/configs/mecp5123.h
> +++ b/include/configs/mecp5123.h
> @@ -241,26 +241,11 @@
>
> #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
>
> -/* I2C */
> -#define CONFIG_HARD_I2C /* I2C with hardware support */
> -#define CONFIG_I2C_MULTI_BUS
> -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F /* slave address */
> -
> /*
> * IIM - IC Identification Module
> */
> #undef CONFIG_FSL_IIM
>
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */
> -#define CONFIG_SYS_EEPROM_WREN /* Use EEPROM write protect */
> -
> /*
> * Ethernet configuration
> */
> @@ -280,7 +265,7 @@
> /*
> * Environment
> */
> -#define CONFIG_ENV_IS_IN_EEPROM /* Store env in I2C EEPROM */
> +#define CONFIG_ENV_IS_NOWHERE /* Store env in I2C EEPROM */
> #define CONFIG_ENV_SIZE 0x1000
> #define CONFIG_ENV_OFFSET 0x0000 /* environment starts here */
>
> @@ -288,7 +273,6 @@
> #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
>
> #define CONFIG_CMD_REGINFO
> -#define CONFIG_CMD_EEPROM
> #undef CONFIG_CMD_FUSE
> #undef CONFIG_CMD_IDE
> #define CONFIG_CMD_JFFS2
> diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
> index 136db0dd26..cb5c346807 100644
> --- a/include/configs/motionpro.h
> +++ b/include/configs/motionpro.h
> @@ -34,7 +34,6 @@
> * Command line configuration.
> */
> #define CONFIG_CMD_DTT
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_IDE
> #define CONFIG_CMD_IMMAP
> #define CONFIG_CMD_JFFS2
> @@ -255,21 +254,6 @@
> #define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET
> #define CONFIG_SYS_ATA_STRIDE 4
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* select I2C module #2 */
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
> -
> /*
> * RTC configuration
> */
> @@ -283,12 +267,6 @@
> #define ENABLE_GPIO_OUT 0x00000024
> #define LED_ON 0x00000010
>
> -/*
> - * Temperature sensor
> - */
> -#define CONFIG_DTT_LM75 1
> -#define CONFIG_DTT_SENSORS { 0x49 }
> -
> /*
> * Environment settings
> */
> diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
> index dafb724e3f..f3961a6f35 100644
> --- a/include/configs/mpc5121ads.h
> +++ b/include/configs/mpc5121ads.h
> @@ -327,28 +327,11 @@
>
> #endif
>
> -/* I2C */
> -#define CONFIG_HARD_I2C /* I2C with hardware support */
> -#define CONFIG_I2C_MULTI_BUS
> -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -#if 0
> -#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
> -#endif
> -
> /*
> * IIM - IC Identification Module
> */
> #undef CONFIG_FSL_IIM
>
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */
> -
> /*
> * Ethernet configuration
> */
> @@ -396,7 +379,6 @@
> #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
> #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
>
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_IDE
> #define CONFIG_CMD_JFFS2
> #define CONFIG_CMD_REGINFO
> diff --git a/include/configs/mxs.h b/include/configs/mxs.h
> index fdf596f82f..c403dda483 100644
> --- a/include/configs/mxs.h
> +++ b/include/configs/mxs.h
> @@ -126,16 +126,6 @@
> #endif
> #endif
>
> -/* I2C */
> -#ifdef CONFIG_CMD_I2C
> -#define CONFIG_SYS_I2C
> -#define CONFIG_SYS_I2C_MXS
> -#define CONFIG_HARD_I2C
> -#ifndef CONFIG_SYS_I2C_SPEED
> -#define CONFIG_SYS_I2C_SPEED 400000
> -#endif
> -#endif
> -
> /* LCD */
> #ifdef CONFIG_VIDEO
> #define CONFIG_VIDEO_MXS
> diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
> index e2881a7177..1b4200bcbf 100644
> --- a/include/configs/o2dnt-common.h
> +++ b/include/configs/o2dnt-common.h
> @@ -68,7 +68,6 @@
> /*
> * Supported commands
> */
> -#define CONFIG_CMD_EEPROM
> #ifdef CONFIG_PCI
> #define CONFIG_CMD_PCI
> #endif
> @@ -172,27 +171,6 @@
> #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
> #endif
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration:
> - *
> - * O2DNT board is equiped with Ramtron FRAM device FM24CL16
> - * 16 Kib Ferroelectric Nonvolatile serial RAM memory
> - * organized as 2048 x 8 bits and addressable as eight I2C devices
> - * 0x50 ... 0x57 each 256 bytes in size
> - *
> - */
> -#define CONFIG_SYS_I2C_FRAM
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
> /*
> * There is no write delay with FRAM, write operations are performed at bus
> * speed. Thus, no status polling or write delay is needed.
> diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
> index 6d8a2338a2..406f3e547a 100644
> --- a/include/configs/pcm030.h
> +++ b/include/configs/pcm030.h
> @@ -49,7 +49,6 @@ Serial console configuration
> /*
> * Command line configuration.
> */
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_JFFS2
> #define CONFIG_CMD_PCI
>
> @@ -120,31 +119,6 @@ IPB Bus clocking configuration.
> #define CONFIG_PCI_IO_SIZE 0x01000000
> #define CONFIG_SYS_XLB_PIPELINING 1
>
> -/*---------------------------------------------------------------------------
> - I2C configuration
> ----------------------------------------------------------------------------*/
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*---------------------------------------------------------------------------
> - EEPROM CAT24WC32 configuration
> ----------------------------------------------------------------------------*/
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */
> -#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
> -#define CONFIG_SYS_EEPROM_SIZE 2048
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
> -
> -/*---------------------------------------------------------------------------
> -RTC configuration
> ----------------------------------------------------------------------------*/
> -#define RTC
> -#define CONFIG_RTC_PCF8563 1
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x51
> -
> /*---------------------------------------------------------------------------
> Flash configuration
> ---------------------------------------------------------------------------*/
> @@ -172,11 +146,10 @@ RTC configuration
> Environment settings
> ---------------------------------------------------------------------------*/
>
> -/* pcm030 ships with environment is EEPROM by default */
> -#define CONFIG_ENV_IS_IN_EEPROM 1
> +#define CONFIG_ENV_IS_NOWHERE
> #define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */
> /*beginning of the EEPROM */
> -#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE
> +#define CONFIG_ENV_SIZE 2048
>
> #define CONFIG_ENV_OVERWRITE 1
>
> diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
> index 501611dde7..4bd8236b33 100644
> --- a/include/configs/pdm360ng.h
> +++ b/include/configs/pdm360ng.h
> @@ -301,34 +301,11 @@
> #define CONFIG_SYS_PDM360NG_COPROC_READ_DELAY 5000
> #define CONFIG_SYS_PDM360NG_COPROC_BAUDRATE 38400
>
> -/*
> - * I2C
> - */
> -#define CONFIG_HARD_I2C /* I2C with hardware support */
> -#define CONFIG_I2C_MULTI_BUS
> -#define CONFIG_I2C_CMD_TREE
> -/* I2C speed and slave address */
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> /*
> * IIM - IC Identification Module
> */
> #undef CONFIG_FSL_IIM
>
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM addr */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* ST AT24C01 */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-Byte Write Mode */
> -
> -/*
> - * MAC addr in EEPROM
> - */
> -#define CONFIG_SYS_I2C_EEPROM_BUS_NUM 0
> -#define CONFIG_SYS_I2C_EEPROM_MAC_OFFSET 0x10
> /*
> * Enabled only to delete "ethaddr" before testing
> * "ethaddr" setting from EEPROM
> @@ -344,12 +321,6 @@
> #define CONFIG_FEC_AN_TIMEOUT 1
> #define CONFIG_HAS_ETH0
>
> -/*
> - * Configure on-board RTC
> - */
> -#define CONFIG_RTC_M41T62 /* use M41T00 rtc via i2c */
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
> -
> /*
> * Environment
> */
> @@ -367,7 +338,6 @@
> #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
> #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
>
> -#define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_REGINFO
>
> #undef CONFIG_CMD_FUSE
> diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
> index 642572fc95..b159b1ed8d 100644
> --- a/include/configs/r0p7734.h
> +++ b/include/configs/r0p7734.h
> @@ -40,20 +40,6 @@
> # define CONFIG_SMC911X_BASE (0x84000000)
> #endif
>
> -/* I2C */
> -#define CONFIG_SH_SH7734_I2C 1
> -#define CONFIG_HARD_I2C 1
> -#define CONFIG_I2C_MULTI_BUS 1
> -#define CONFIG_SYS_MAX_I2C_BUS 2
> -#define CONFIG_SYS_I2C_MODULE 0
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x50
> -#define CONFIG_SH_I2C_DATA_HIGH 4
> -#define CONFIG_SH_I2C_DATA_LOW 5
> -#define CONFIG_SH_I2C_CLOCK 500000000
> -#define CONFIG_SH_I2C_BASE0 0xFFC70000
> -#define CONFIG_SH_I2C_BASE1 0xFFC7100
> -
> /* undef to save memory */
> #define CONFIG_SYS_LONGHELP
> /* Monitor Command Prompt */
> diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
> index 398b3aa343..33487cd86f 100644
> --- a/include/configs/s32v234evb.h
> +++ b/include/configs/s32v234evb.h
> @@ -97,16 +97,6 @@
> #define CONFIG_PHY_MICREL
> #endif
>
> -#if 0 /* Disable until the I2C driver will be updated */
> -
> -/* I2C Configs */
> -#define CONFIG_CMD_I2C
> -#define CONFIG_HARD_I2C
> -#define CONFIG_I2C_MXC
> -#define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#endif
> -
> #if 0 /* Disable until the FLASH will be implemented */
> #define CONFIG_SYS_USE_NAND
> #endif
> diff --git a/include/configs/v38b.h b/include/configs/v38b.h
> index cc0007827d..0bc0ae517a 100644
> --- a/include/configs/v38b.h
> +++ b/include/configs/v38b.h
> @@ -134,27 +134,6 @@
> */
> #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
>
> -/*
> - * I2C configuration
> - */
> -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
> -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
> -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
> -#define CONFIG_SYS_I2C_SLAVE 0x7F
> -
> -/*
> - * EEPROM configuration
> - */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
> -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
> -
> -/*
> - * RTC configuration
> - */
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x51
> -
> /*
> * Flash configuration - use CFI driver
> */
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list