[U-Boot] [PATCH v3 04/12] i2c: pdm360ng: Drop use of CONFIG_I2C_HARD

Heiko Schocher hs at denx.de
Mon May 15 04:23:53 UTC 2017


Hello Simon,

Am 13.05.2017 um 05:09 schrieb Simon Glass:
> Drop use of this long-deprecated option.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
>   board/pdm360ng/pdm360ng.c | 30 ------------------------------
>   1 file changed, 30 deletions(-)

Thanks!

Applied to u-boot-i2c.git master

u-boot-i2c master just testing on travis:
https://travis-ci.org/hsdenx/u-boot-i2c/builds/232288665

bye,
Heiko
>
> diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c
> index 9db31d3312..371bcd9e6b 100644
> --- a/board/pdm360ng/pdm360ng.c
> +++ b/board/pdm360ng/pdm360ng.c
> @@ -169,36 +169,6 @@ int misc_init_r(void)
>   	clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000);
>   #endif
>
> -#if defined(CONFIG_HARD_I2C)
> -	if (!getenv("ethaddr")) {
> -		uchar buf[6];
> -		uchar ifm_oui[3] = { 0, 2, 1, };
> -		int ret;
> -
> -		/* I2C-0 for on-board eeprom */
> -		i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS_NUM);
> -
> -		/* Read ethaddr from EEPROM */
> -		ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
> -			       CONFIG_SYS_I2C_EEPROM_MAC_OFFSET, 1, buf, 6);
> -		if (ret != 0) {
> -			printf("Error: Unable to read MAC from I2C"
> -				" EEPROM at address %02X:%02X\n",
> -				CONFIG_SYS_I2C_EEPROM_ADDR,
> -				CONFIG_SYS_I2C_EEPROM_MAC_OFFSET);
> -			return 1;
> -		}
> -
> -		/* Owned by IFM ? */
> -		if (memcmp(buf, ifm_oui, sizeof(ifm_oui))) {
> -			printf("Illegal MAC address in EEPROM: %pM\n", buf);
> -			return 1;
> -		}
> -
> -		eth_setenv_enetaddr("ethaddr", buf);
> -	}
> -#endif /* defined(CONFIG_HARD_I2C) */
> -
>   	return 0;
>   }
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list