[U-Boot] [PATCH v3 25/48] Convert CONFIG_CMD_FPGA_LOADBP et al to Kconfig
Simon Glass
sjg at chromium.org
Wed May 17 09:25:21 UTC 2017
This converts the following to Kconfig:
CONFIG_CMD_FPGA_LOADBP
CONFIG_CMD_FPGA_LOADFS
CONFIG_CMD_FPGA_LOADMK
CONFIG_CMD_FPGA_LOADP
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2: None
README | 13 -------------
arch/Kconfig | 1 +
cmd/Kconfig | 26 ++++++++++++++++++++++++++
configs/astro_mcf5373l_defconfig | 1 +
configs/mt_ventoux_defconfig | 1 +
configs/x600_defconfig | 1 +
configs/zynq_microzed_defconfig | 4 ++++
configs/zynq_picozed_defconfig | 4 ++++
configs/zynq_zc702_defconfig | 4 ++++
configs/zynq_zc706_defconfig | 4 ++++
configs/zynq_zc770_xm010_defconfig | 4 ++++
configs/zynq_zc770_xm011_defconfig | 4 ++++
configs/zynq_zc770_xm012_defconfig | 4 ++++
configs/zynq_zc770_xm013_defconfig | 4 ++++
configs/zynq_zed_defconfig | 4 ++++
configs/zynq_zybo_defconfig | 4 ++++
include/configs/astro_mcf5373l.h | 1 -
include/configs/mt_ventoux.h | 1 -
include/configs/topic_miami.h | 4 ----
include/configs/x600.h | 1 -
include/configs/x86-common.h | 1 -
include/configs/zynq-common.h | 4 ----
scripts/config_whitelist.txt | 4 ----
23 files changed, 70 insertions(+), 29 deletions(-)
diff --git a/README b/README
index 1b5aabbeb6..4758dff0d1 100644
--- a/README
+++ b/README
@@ -2384,19 +2384,6 @@ The following options need to be configured:
Specify the number of FPGA devices to support.
- CONFIG_CMD_FPGA_LOADMK
-
- Enable support for fpga loadmk command
-
- CONFIG_CMD_FPGA_LOADP
-
- Enable support for fpga loadp command - load partial bitstream
-
- CONFIG_CMD_FPGA_LOADBP
-
- Enable support for fpga loadbp command - load partial bitstream
- (Xilinx only)
-
CONFIG_SYS_FPGA_PROG_FEEDBACK
Enable printing of hash marks during FPGA configuration.
diff --git a/arch/Kconfig b/arch/Kconfig
index 826e346f98..ce47078d6a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -85,6 +85,7 @@ config X86
select DM_SPI
select DM_SPI_FLASH
select USB_EHCI_HCD
+ imply CMD_FPGA_LOADMK
config XTENSA
bool "Xtensa architecture"
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 99e42e4b36..16cf961f3e 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -593,6 +593,32 @@ config CMD_FPGA
help
FPGA support.
+config CMD_FPGA_LOADBP
+ bool "fpga loadbp - load partial bitstream (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGA_LOADFS
+ bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+ bool "fpga loadmk - load bitstream from image"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+ bool "fpga loadp - load partial bitstream"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
config CMD_FPGAD
bool "fpgad - dump FPGA registers"
help
diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig
index d5e84308d6..c35222b244 100644
--- a/configs/astro_mcf5373l_defconfig
+++ b/configs/astro_mcf5373l_defconfig
@@ -5,6 +5,7 @@ CONFIG_BOOTDELAY=1
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="URMEL > "
CONFIG_CMD_I2C=y
+CONFIG_CMD_FPGA_LOADMK=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
index e426772b15..c4a6f2063f 100644
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@@ -17,6 +17,7 @@ CONFIG_CMD_EEPROM=y
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_FPGA_LOADMK=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
diff --git a/configs/x600_defconfig b/configs/x600_defconfig
index 3aaba16c2e..2e5d5f1ae8 100644
--- a/configs/x600_defconfig
+++ b/configs/x600_defconfig
@@ -20,6 +20,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_LOOPW=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_FPGA_LOADMK=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index 4093618325..2d7fffc1f4 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -16,6 +16,10 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
index 3c3a5b29b0..7ca69a973c 100644
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -12,6 +12,10 @@ CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 83e8f65082..44e6850d8b 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -19,6 +19,10 @@ CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 9dbf47f496..825346abd6 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -19,6 +19,10 @@ CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index ececcb4f95..a1ef49f250 100644
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -15,6 +15,10 @@ CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index 980382ce69..dc49372e48 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -14,6 +14,10 @@ CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index 48caf31683..16cd613110 100644
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -11,6 +11,10 @@ CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index 23bcb0e446..4396db0eb1 100644
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -13,6 +13,10 @@ CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
index 26a5320b61..2887ca4167 100644
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -16,6 +16,10 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 8bed4e6809..e5be0d141e 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -19,6 +19,10 @@ CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 8899579faa..084b78c1e3 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -63,7 +63,6 @@
#define CONFIG_CMD_JFFS2
#endif
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMDLINE_EDITING
#define CONFIG_MCFRTC
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
index 2e373175dc..ed83eeba54 100644
--- a/include/configs/mt_ventoux.h
+++ b/include/configs/mt_ventoux.h
@@ -39,7 +39,6 @@
/*
* FPGA
*/
-#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX
#define CONFIG_FPGA_SPARTAN3
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index 23160bd88d..a28922585c 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -44,10 +44,6 @@
#undef CONFIG_SPL_FPGA_SUPPORT
/* FPGA commands that we don't use */
-#undef CONFIG_CMD_FPGA_LOADMK
-#undef CONFIG_CMD_FPGA_LOADP
-#undef CONFIG_CMD_FPGA_LOADBP
-#undef CONFIG_CMD_FPGA_LOADFS
/* Extras */
#define CONFIG_CMD_MEMTEST
diff --git a/include/configs/x600.h b/include/configs/x600.h
index afbd837cb8..c7d32fedb3 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -106,7 +106,6 @@
/*
* Command support defines
*/
-#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_SAVES
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 29be55a840..8284076b08 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -70,7 +70,6 @@
/*-----------------------------------------------------------------------
* Command line configuration.
*/
-#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_IO
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PCI
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 223637952d..c958f2de22 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -259,10 +259,6 @@
#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX
#define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FPGA_LOADP
-#define CONFIG_CMD_FPGA_LOADBP
-#define CONFIG_CMD_FPGA_LOADFS
/* FIT support */
#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e8212938bb..1a62d3e362 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -383,10 +383,6 @@ CONFIG_CM922T_XA10
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_FPGA_LOADBP
-CONFIG_CMD_FPGA_LOADFS
-CONFIG_CMD_FPGA_LOADMK
-CONFIG_CMD_FPGA_LOADP
CONFIG_CMD_FUSE
CONFIG_CMD_GETTIME
CONFIG_CMD_GSC
--
2.13.0.303.g4ebf302169-goog
More information about the U-Boot
mailing list