[U-Boot] [PATCH v3 07/48] Kconfig: Drop CONFIG_SYS_I2C_DTT_ADDR

Simon Glass sjg at chromium.org
Wed May 17 09:25:03 UTC 2017


This option is only defined to a non-default value by canyonlands, which
needs conversion to driver model (where the I2C address would be defined
by the device tree).

Drop this option.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
Reviewed-by: Heiko Schocher <hs at denx.de>
---

Changes in v3: None
Changes in v2: None

 README                        | 6 ------
 drivers/hwmon/ds1775.c        | 2 +-
 drivers/hwmon/lm75.c          | 4 ----
 include/configs/canyonlands.h | 4 ----
 include/configs/kilauea.h     | 1 -
 include/configs/makalu.h      | 1 -
 scripts/config_whitelist.txt  | 1 -
 7 files changed, 1 insertion(+), 18 deletions(-)

diff --git a/README b/README
index 0ef706f78d..b58911da49 100644
--- a/README
+++ b/README
@@ -2329,12 +2329,6 @@ The following options need to be configured:
 		If defined, then this indicates the I2C bus number for the DTT.
 		If not defined, then U-Boot assumes that DTT is on I2C bus 0.
 
-		CONFIG_SYS_I2C_DTT_ADDR:
-
-		If defined, specifies the I2C address of the DTT device.
-		If not defined, then U-Boot uses predefined value for
-		specified DTT device.
-
 		CONFIG_SOFT_I2C_READ_REPEATED_START
 
 		defining this will force the i2c_read() function in
diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
index b95b130d92..4c0c0b82a0 100644
--- a/drivers/hwmon/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -11,7 +11,7 @@
 #include <i2c.h>
 #include <dtt.h>
 
-#define DTT_I2C_DEV_CODE	CONFIG_SYS_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
+#define DTT_I2C_DEV_CODE	0x48 /* Dallas Semi's DS1775 device code */
 #define DTT_READ_TEMP		0x0
 #define DTT_CONFIG		0x1
 #define DTT_TEMP_HYST		0x2
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 462f902dad..aafa4757b1 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -16,11 +16,7 @@
 /*
  * Device code
  */
-#if defined(CONFIG_SYS_I2C_DTT_ADDR)
-#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR
-#else
 #define DTT_I2C_DEV_CODE 0x48			/* ON Semi's LM75 device */
-#endif
 #define DTT_READ_TEMP		0x0
 #define DTT_CONFIG		0x1
 #define DTT_TEMP_HYST		0x2
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index a330372d19..ea440d6e16 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -269,10 +269,6 @@
 #define CONFIG_SYS_DTT_LOW_TEMP	-30
 #define CONFIG_SYS_DTT_HYSTERESIS	3
 
-#if defined(CONFIG_ARCHES)
-#define CONFIG_SYS_I2C_DTT_ADDR	0x4a		/* AD7414 I2C address	*/
-#endif
-
 #if !defined(CONFIG_ARCHES)
 /* RTC configuration */
 #define CONFIG_RTC_M41T62
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 1f5c2ad234..b8c0d0d8f0 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -320,7 +320,6 @@
 /* Standard DTT sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
-#define CONFIG_SYS_I2C_DTT_ADDR	0x48
 
 /* RTC configuration */
 #define CONFIG_RTC_DS1338	1
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index da5cfa19d3..cdb02f3693 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -192,7 +192,6 @@
 /* Standard DTT sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
-#define CONFIG_SYS_I2C_DTT_ADDR	0x48
 
 /* RTC configuration */
 #define CONFIG_RTC_X1205	1
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e9ba613c2c..29ec43dd1c 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4206,7 +4206,6 @@ CONFIG_SYS_I2C_DSPIC_2_ADDR
 CONFIG_SYS_I2C_DSPIC_ADDR
 CONFIG_SYS_I2C_DSPIC_IO_ADDR
 CONFIG_SYS_I2C_DSPIC_KEYB_ADDR
-CONFIG_SYS_I2C_DTT_ADDR
 CONFIG_SYS_I2C_DVI_ADDR
 CONFIG_SYS_I2C_DVI_BUS_NUM
 CONFIG_SYS_I2C_EARLY_INIT
-- 
2.13.0.303.g4ebf302169-goog



More information about the U-Boot mailing list