[U-Boot] [PATCH 2/2] mx6sabresd: Add SPL support for the mx6dl variant

[Jagan Teki]

On Fri, May 12, 2017 at 9:15 PM, Fabio Estevam <fabio.estevam at nxp.com> wrote:
> Add support for the mx6dlsabresd board in SPL.
>
> Retrieved the DCD table from:
> board/freescale/mx6sabresd/mx6dlsabresd.cfg
> (NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga)
>
> Flashed SPL and u-boot.img to an SD card and could successfully boot it
> on mx6q, mx6qp and mx6dl sabresd boards.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Reviewed-by: Jagan Teki <jagan at openedev.com>

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.