[U-Boot] [PATCH 1/3] omap: Add routine for setting fastboot variables

Sam Protsenko semen.protsenko at linaro.org
Thu May 18 13:01:00 UTC 2017


This patch reuses new option, which allows us to expose variables
from environment to "fastboot getvar" command. Those variables must be
of "fastboot.%s" format.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
 arch/arm/include/asm/omap_common.h |   2 +
 arch/arm/mach-omap2/utils.c        | 134 +++++++++++++++++++++++++++++++++++++
 2 files changed, 136 insertions(+)

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index c1a70b15d0..cede2f7b28 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -643,6 +643,8 @@ void omap_die_id_get_board_serial(struct tag_serialnr *serialnr);
 void omap_die_id_usbethaddr(void);
 void omap_die_id_display(void);
 
+void omap_set_fastboot_vars(void);
+
 void recalibrate_iodelay(void);
 
 void omap_smc1(u32 service, u32 val);
diff --git a/arch/arm/mach-omap2/utils.c b/arch/arm/mach-omap2/utils.c
index 2d03ebfbd3..0689c879b0 100644
--- a/arch/arm/mach-omap2/utils.c
+++ b/arch/arm/mach-omap2/utils.c
@@ -6,6 +6,16 @@
  */
 #include <common.h>
 #include <asm/arch/sys_proto.h>
+
+/* Device type bits in CONTROL_STATUS register */
+#define DEVICETYPE_OFFSET	6
+#define DEVICETYPE_MASK		(0x7 << DEVICETYPE_OFFSET)
+#define OMAP_TYPE_TEST		0x0
+#define OMAP_TYPE_EMU		0x1
+#define OMAP_TYPE_SEC		0x2
+#define OMAP_TYPE_GP		0x3
+#define OMAP_TYPE_BAD		0x4
+
 static void do_cancel_out(u32 *num, u32 *den, u32 factor)
 {
 	while (1) {
@@ -18,6 +28,122 @@ static void do_cancel_out(u32 *num, u32 *den, u32 factor)
 	}
 }
 
+static const char *omap_get_cpu_type(void)
+{
+	u32 type;
+
+	type = readl((*ctrl)->control_status);
+	type &= DEVICETYPE_MASK;
+	type >>= DEVICETYPE_OFFSET;
+
+	switch (type) {
+	case OMAP_TYPE_EMU:
+		return "EMU";
+	case OMAP_TYPE_SEC:
+		return "HS";
+	case OMAP_TYPE_GP:
+		return "GP";
+	default:
+		return NULL;
+	}
+}
+
+static void omap_set_fastboot_cpu(void)
+{
+	u32 cpu_rev;
+	char *cpu;
+
+	cpu_rev = omap_revision();
+
+	switch (cpu_rev) {
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+		cpu = "J6";
+		break;
+	case DRA722_ES1_0:
+	case DRA722_ES2_0:
+		cpu = "J6ECO";
+		break;
+	default:
+		cpu = NULL;
+		printf("Warning: fastboot.cpu: unknown cpu type %u\n", cpu_rev);
+	}
+
+	setenv("fastboot.cpu", cpu);
+}
+
+static void omap_set_fastboot_secure(void)
+{
+	const char *secure;
+
+	secure = omap_get_cpu_type();
+	if (secure == NULL)
+		printf("Warning: fastboot.secure: unknown CPU type\n");
+
+	setenv("fastboot.secure", secure);
+}
+
+static void omap_set_fastboot_board_rev(void)
+{
+	const char *board_rev;
+
+	board_rev = getenv("board_rev");
+	if (board_rev == NULL)
+		printf("Warning: fastboot.board_rev: unknown board revision\n");
+
+	setenv("fastboot.board_rev", board_rev);
+}
+
+#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
+static u32 omap_mmc_get_part_size(const char *part)
+{
+	int res;
+	struct blk_desc *dev_desc;
+	disk_partition_t info;
+	u64 sz = 0;
+
+	dev_desc = blk_get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
+	if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
+		error("invalid mmc device\n");
+		return 0;
+	}
+
+	res = part_get_info_by_name(dev_desc, part, &info);
+	if (res < 0) {
+		error("cannot find partition: '%s'\n", part);
+		return 0;
+	}
+
+	/* Calculate size in bytes */
+	sz = (info.size * (u64)info.blksz);
+	/* to KiB */
+	sz >>= 10;
+
+	return (u32)sz;
+}
+
+static void omap_set_fastboot_userdata_size(void)
+{
+	char buf[16];
+	u32 sz_kb;
+
+	sz_kb = omap_mmc_get_part_size("userdata");
+	if (sz_kb == 0) {
+		buf[0] = '\0';
+		printf("Warning: fastboot.userdata_size: unable to calc\n");
+	} else {
+		sprintf(buf, "%u", sz_kb);
+	}
+
+	setenv("fastboot.userdata_size", buf);
+}
+#else
+static inline void omap_set_fastboot_userdata_size(void)
+{
+}
+#endif
+
 /*
  * Cancel out the denominator and numerator of a fraction
  * to get smaller numerator and denominator.
@@ -111,3 +237,11 @@ void omap_die_id_display(void)
 	printf("OMAP die ID: %08x%08x%08x%08x\n", die_id[3], die_id[2],
 		die_id[1], die_id[0]);
 }
+
+void omap_set_fastboot_vars(void)
+{
+	omap_set_fastboot_cpu();
+	omap_set_fastboot_secure();
+	omap_set_fastboot_board_rev();
+	omap_set_fastboot_userdata_size();
+}
-- 
2.11.0



More information about the U-Boot mailing list