[U-Boot] [PATCH] ARM: k2g: Fix passing main pll info for higher speeds

[Lokesh Vutla]

Main pll is marked as arm plls for higher speeds. Fix this.

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 board/ti/ks2_evm/board_k2g.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 21aec8f065..f0bd31d6f7 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -79,29 +79,29 @@ static struct pll_init_data main_pll_config[MAX_SYSCLK][NUM_SPDS] = {
 		[SPD400]	= {MAIN_PLL, 125, 3, 2},
 		[SPD600]	= {MAIN_PLL, 125, 2, 2},
 		[SPD800]	= {MAIN_PLL, 250, 3, 2},
-		[SPD900]	= {TETRIS_PLL, 187, 2, 2},
-		[SPD1000]	= {TETRIS_PLL, 104, 1, 2},
+		[SPD900]	= {MAIN_PLL, 187, 2, 2},
+		[SPD1000]	= {MAIN_PLL, 104, 1, 2},
 	},
 	[SYSCLK_24MHz] = {
 		[SPD400]	= {MAIN_PLL, 100, 3, 2},
 		[SPD600]	= {MAIN_PLL, 300, 6, 2},
 		[SPD800]	= {MAIN_PLL, 200, 3, 2},
-		[SPD900]	= {TETRIS_PLL, 75, 1, 2},
-		[SPD1000]	= {TETRIS_PLL, 250, 3, 2},
+		[SPD900]	= {MAIN_PLL, 75, 1, 2},
+		[SPD1000]	= {MAIN_PLL, 250, 3, 2},
 	},
 	[SYSCLK_25MHz] = {
 		[SPD400]	= {MAIN_PLL, 32, 1, 2},
 		[SPD600]	= {MAIN_PLL, 48, 1, 2},
 		[SPD800]	= {MAIN_PLL, 64, 1, 2},
-		[SPD900]	= {TETRIS_PLL, 72, 1, 2},
-		[SPD1000]	= {TETRIS_PLL, 80, 1, 2},
+		[SPD900]	= {MAIN_PLL, 72, 1, 2},
+		[SPD1000]	= {MAIN_PLL, 80, 1, 2},
 	},
 	[SYSCLK_26MHz] = {
 		[SPD400]	= {MAIN_PLL, 400, 13, 2},
 		[SPD600]	= {MAIN_PLL, 230, 5, 2},
 		[SPD800]	= {MAIN_PLL, 123, 2, 2},
-		[SPD900]	= {TETRIS_PLL, 69, 1, 2},
-		[SPD1000]	= {TETRIS_PLL, 384, 5, 2},
+		[SPD900]	= {MAIN_PLL, 69, 1, 2},
+		[SPD1000]	= {MAIN_PLL, 384, 5, 2},
 	},
 };
 
-- 
2.11.0