[U-Boot] [PATCH v2 02/10] drivers: spi: consider command bytes when sending transfers

Álvaro Fernández Rojas noltari at gmail.com
Mon May 22 18:21:29 UTC 2017


Command bytes are part of the written bytes and they should be taken into
account when sending a spi transfer.

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 v2: Introduce changes requested by Simon Glass:
  - Always include command bytes when determining max write size.

 drivers/mtd/spi/spi_flash.c | 2 +-
 include/spi.h               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index e44c10f..5b8cbc9 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -380,7 +380,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
 
 		if (spi->max_write_size)
 			chunk_len = min(chunk_len,
-					(size_t)spi->max_write_size);
+					spi->max_write_size - len);
 
 		spi_flash_addr(write_addr, cmd);
 
diff --git a/include/spi.h b/include/spi.h
index 75a994c..f418ea1 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -89,7 +89,7 @@ struct dm_spi_slave_platdata {
  * @max_read_size:	If non-zero, the maximum number of bytes which can
  *			be read at once.
  * @max_write_size:	If non-zero, the maximum number of bytes which can
- *			be written at once, excluding command bytes.
+ *			be written at once.
  * @memory_map:		Address of read-only SPI flash access.
  * @flags:		Indication of SPI flags.
  */
-- 
2.1.4



More information about the U-Boot mailing list