[U-Boot] [PATCH v7 07/17] sabresd: i.MX6Q: Add initial dts support
Jagan Teki
jagannadh.teki at gmail.com
Tue May 23 07:58:20 UTC 2017
From: Jagan Teki <jagan at amarulasolutions.com>
Add initial devicetree support for i.MX6 Quad Sabresd board.
(1) Added config options
CONFIG_OF_CONTROL=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_BLK is not set
CONFIG_DM_MMC_OPS is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
(2) Moved spl code to board/freescale/mx6sabresd/spl.c
(3) Removed U-Boot proper board_mmc_init code, since mmc
support through dtb
(4) DM_GPIO and GM_MMC are undef for SPL, till SPL_OF_CONTROL
support.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
arch/arm/cpu/armv7/mx6/Kconfig | 9 +-
board/freescale/mx6sabresd/Makefile | 1 +
board/freescale/mx6sabresd/mx6sabresd.c | 523 --------------------------------
board/freescale/mx6sabresd/spl.c | 501 ++++++++++++++++++++++++++++++
configs/mx6sabresd_spl_defconfig | 3 +
include/configs/mx6sabresd.h | 5 +-
6 files changed, 516 insertions(+), 526 deletions(-)
create mode 100644 board/freescale/mx6sabresd/spl.c
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 0ff9045..0497fe0 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -210,11 +210,16 @@ config TARGET_MX6QSABREAUTO
config TARGET_MX6SABRESD
bool "mx6sabresd"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
+ select OF_CONTROL
select DM
+ select DM_GPIO
+ select DM_MMC
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select PINCTRL
+ select PINCTRL_IMX6
+ select SUPPORT_SPL
config TARGET_MX6SLEVK
bool "mx6slevk"
diff --git a/board/freescale/mx6sabresd/Makefile b/board/freescale/mx6sabresd/Makefile
index cfca2ef..3ae32ab 100644
--- a/board/freescale/mx6sabresd/Makefile
+++ b/board/freescale/mx6sabresd/Makefile
@@ -7,3 +7,4 @@
#
obj-y := mx6sabresd.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index f4a5d9c..7af263d 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -16,8 +16,6 @@
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/video.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/mxc_hdmi.h>
@@ -36,10 +34,6 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
@@ -56,8 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define DISP0_PWR_EN IMX_GPIO_NR(1, 21)
-#define KEY_VOL_UP IMX_GPIO_NR(1, 4)
-
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@@ -100,47 +92,6 @@ static void setup_iomux_enet(void)
udelay(100);
}
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
-};
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
static iomux_v3_cfg_t const ecspi1_pads[] = {
IOMUX_PADS(PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
@@ -253,121 +204,6 @@ static void setup_iomux_uart(void)
SETUP_IOMUX_PADS(uart1_pads);
}
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[3] = {
- {USDHC2_BASE_ADDR},
- {USDHC3_BASE_ADDR},
- {USDHC4_BASE_ADDR},
-};
-
-#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
-#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
-
-int board_mmc_get_env_dev(int devno)
-{
- return devno - 1;
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- case USDHC3_BASE_ADDR:
- ret = !gpio_get_value(USDHC3_CD_GPIO);
- break;
- case USDHC4_BASE_ADDR:
- ret = 1; /* eMMC/uSDHC4 is always present */
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-#ifndef CONFIG_SPL_BUILD
- int ret;
- int i;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 SD2
- * mmc1 SD3
- * mmc2 eMMC
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc2_pads);
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc3_pads);
- gpio_direction_input(USDHC3_CD_GPIO);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 2:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) then supported by the board (%d)\n",
- i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret)
- return ret;
- }
-
- return 0;
-#else
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned reg = readl(&psrc->sbmr1) >> 11;
- /*
- * Upon reading BOOT_CFG register the following map is done:
- * Bit 11 and 12 of BOOT_CFG register can determine the current
- * mmc port
- * 0x1 SD1
- * 0x2 SD2
- * 0x3 SD4
- */
-
- switch (reg & 0x3) {
- case 0x1:
- SETUP_IOMUX_PADS(usdhc2_pads);
- usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- break;
- case 0x2:
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- break;
- case 0x3:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- break;
- }
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif
-}
-#endif
-
static int ar8031_phy_fixup(struct phy_device *phydev)
{
unsigned short val;
@@ -718,362 +554,3 @@ int checkboard(void)
puts("Board: MX6-SabreSD\n");
return 0;
}
-
-#ifdef CONFIG_SPL_BUILD
-#include <asm/arch/mx6-ddr.h>
-#include <spl.h>
-#include <libfdt.h>
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
- gpio_direction_input(KEY_VOL_UP);
-
- /* Only enter in Falcon mode if KEY_VOL_UP is pressed */
- return gpio_get_value(KEY_VOL_UP);
-}
-#endif
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00C03F3F, &ccm->CCGR0);
- writel(0x0030FC03, &ccm->CCGR1);
- writel(0x0FFFC000, &ccm->CCGR2);
- writel(0x3FF00000, &ccm->CCGR3);
- writel(0x00FFF300, &ccm->CCGR4);
- writel(0x0F0000C3, &ccm->CCGR5);
- writel(0x000003FF, &ccm->CCGR6);
-}
-
-static void gpr_init(void)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
- /* enable AXI cache for VDOA/VPU/IPU */
- writel(0xF00000CF, &iomux->gpr[4]);
- if (is_mx6dqp()) {
- /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
- writel(0x007F007F, &iomux->gpr[6]);
- writel(0x007F007F, &iomux->gpr[7]);
- } else {
- /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
- writel(0x007F007F, &iomux->gpr[6]);
- writel(0x007F007F, &iomux->gpr[7]);
- }
-}
-
-static int mx6q_dcd_table[] = {
- 0x020e0798, 0x000C0000,
- 0x020e0758, 0x00000000,
- 0x020e0588, 0x00000030,
- 0x020e0594, 0x00000030,
- 0x020e056c, 0x00000030,
- 0x020e0578, 0x00000030,
- 0x020e074c, 0x00000030,
- 0x020e057c, 0x00000030,
- 0x020e058c, 0x00000000,
- 0x020e059c, 0x00000030,
- 0x020e05a0, 0x00000030,
- 0x020e078c, 0x00000030,
- 0x020e0750, 0x00020000,
- 0x020e05a8, 0x00000030,
- 0x020e05b0, 0x00000030,
- 0x020e0524, 0x00000030,
- 0x020e051c, 0x00000030,
- 0x020e0518, 0x00000030,
- 0x020e050c, 0x00000030,
- 0x020e05b8, 0x00000030,
- 0x020e05c0, 0x00000030,
- 0x020e0774, 0x00020000,
- 0x020e0784, 0x00000030,
- 0x020e0788, 0x00000030,
- 0x020e0794, 0x00000030,
- 0x020e079c, 0x00000030,
- 0x020e07a0, 0x00000030,
- 0x020e07a4, 0x00000030,
- 0x020e07a8, 0x00000030,
- 0x020e0748, 0x00000030,
- 0x020e05ac, 0x00000030,
- 0x020e05b4, 0x00000030,
- 0x020e0528, 0x00000030,
- 0x020e0520, 0x00000030,
- 0x020e0514, 0x00000030,
- 0x020e0510, 0x00000030,
- 0x020e05bc, 0x00000030,
- 0x020e05c4, 0x00000030,
- 0x021b0800, 0xa1390003,
- 0x021b080c, 0x001F001F,
- 0x021b0810, 0x001F001F,
- 0x021b480c, 0x001F001F,
- 0x021b4810, 0x001F001F,
- 0x021b083c, 0x43270338,
- 0x021b0840, 0x03200314,
- 0x021b483c, 0x431A032F,
- 0x021b4840, 0x03200263,
- 0x021b0848, 0x4B434748,
- 0x021b4848, 0x4445404C,
- 0x021b0850, 0x38444542,
- 0x021b4850, 0x4935493A,
- 0x021b081c, 0x33333333,
- 0x021b0820, 0x33333333,
- 0x021b0824, 0x33333333,
- 0x021b0828, 0x33333333,
- 0x021b481c, 0x33333333,
- 0x021b4820, 0x33333333,
- 0x021b4824, 0x33333333,
- 0x021b4828, 0x33333333,
- 0x021b08b8, 0x00000800,
- 0x021b48b8, 0x00000800,
- 0x021b0004, 0x00020036,
- 0x021b0008, 0x09444040,
- 0x021b000c, 0x555A7975,
- 0x021b0010, 0xFF538F64,
- 0x021b0014, 0x01FF00DB,
- 0x021b0018, 0x00001740,
- 0x021b001c, 0x00008000,
- 0x021b002c, 0x000026d2,
- 0x021b0030, 0x005A1023,
- 0x021b0040, 0x00000027,
- 0x021b0000, 0x831A0000,
- 0x021b001c, 0x04088032,
- 0x021b001c, 0x00008033,
- 0x021b001c, 0x00048031,
- 0x021b001c, 0x09408030,
- 0x021b001c, 0x04008040,
- 0x021b0020, 0x00005800,
- 0x021b0818, 0x00011117,
- 0x021b4818, 0x00011117,
- 0x021b0004, 0x00025576,
- 0x021b0404, 0x00011006,
- 0x021b001c, 0x00000000,
-};
-
-static int mx6qp_dcd_table[] = {
- 0x020e0798, 0x000c0000,
- 0x020e0758, 0x00000000,
- 0x020e0588, 0x00000030,
- 0x020e0594, 0x00000030,
- 0x020e056c, 0x00000030,
- 0x020e0578, 0x00000030,
- 0x020e074c, 0x00000030,
- 0x020e057c, 0x00000030,
- 0x020e058c, 0x00000000,
- 0x020e059c, 0x00000030,
- 0x020e05a0, 0x00000030,
- 0x020e078c, 0x00000030,
- 0x020e0750, 0x00020000,
- 0x020e05a8, 0x00000030,
- 0x020e05b0, 0x00000030,
- 0x020e0524, 0x00000030,
- 0x020e051c, 0x00000030,
- 0x020e0518, 0x00000030,
- 0x020e050c, 0x00000030,
- 0x020e05b8, 0x00000030,
- 0x020e05c0, 0x00000030,
- 0x020e0774, 0x00020000,
- 0x020e0784, 0x00000030,
- 0x020e0788, 0x00000030,
- 0x020e0794, 0x00000030,
- 0x020e079c, 0x00000030,
- 0x020e07a0, 0x00000030,
- 0x020e07a4, 0x00000030,
- 0x020e07a8, 0x00000030,
- 0x020e0748, 0x00000030,
- 0x020e05ac, 0x00000030,
- 0x020e05b4, 0x00000030,
- 0x020e0528, 0x00000030,
- 0x020e0520, 0x00000030,
- 0x020e0514, 0x00000030,
- 0x020e0510, 0x00000030,
- 0x020e05bc, 0x00000030,
- 0x020e05c4, 0x00000030,
- 0x021b0800, 0xa1390003,
- 0x021b080c, 0x001b001e,
- 0x021b0810, 0x002e0029,
- 0x021b480c, 0x001b002a,
- 0x021b4810, 0x0019002c,
- 0x021b083c, 0x43240334,
- 0x021b0840, 0x0324031a,
- 0x021b483c, 0x43340344,
- 0x021b4840, 0x03280276,
- 0x021b0848, 0x44383A3E,
- 0x021b4848, 0x3C3C3846,
- 0x021b0850, 0x2e303230,
- 0x021b4850, 0x38283E34,
- 0x021b081c, 0x33333333,
- 0x021b0820, 0x33333333,
- 0x021b0824, 0x33333333,
- 0x021b0828, 0x33333333,
- 0x021b481c, 0x33333333,
- 0x021b4820, 0x33333333,
- 0x021b4824, 0x33333333,
- 0x021b4828, 0x33333333,
- 0x021b08c0, 0x24912249,
- 0x021b48c0, 0x24914289,
- 0x021b08b8, 0x00000800,
- 0x021b48b8, 0x00000800,
- 0x021b0004, 0x00020036,
- 0x021b0008, 0x24444040,
- 0x021b000c, 0x555A7955,
- 0x021b0010, 0xFF320F64,
- 0x021b0014, 0x01ff00db,
- 0x021b0018, 0x00001740,
- 0x021b001c, 0x00008000,
- 0x021b002c, 0x000026d2,
- 0x021b0030, 0x005A1023,
- 0x021b0040, 0x00000027,
- 0x021b0400, 0x14420000,
- 0x021b0000, 0x831A0000,
- 0x021b0890, 0x00400C58,
- 0x00bb0008, 0x00000000,
- 0x00bb000c, 0x2891E41A,
- 0x00bb0038, 0x00000564,
- 0x00bb0014, 0x00000040,
- 0x00bb0028, 0x00000020,
- 0x00bb002c, 0x00000020,
- 0x021b001c, 0x04088032,
- 0x021b001c, 0x00008033,
- 0x021b001c, 0x00048031,
- 0x021b001c, 0x09408030,
- 0x021b001c, 0x04008040,
- 0x021b0020, 0x00005800,
- 0x021b0818, 0x00011117,
- 0x021b4818, 0x00011117,
- 0x021b0004, 0x00025576,
- 0x021b0404, 0x00011006,
- 0x021b001c, 0x00000000,
-};
-
-static int mx6dl_dcd_table[] = {
- 0x020e0774, 0x000C0000,
- 0x020e0754, 0x00000000,
- 0x020e04ac, 0x00000030,
- 0x020e04b0, 0x00000030,
- 0x020e0464, 0x00000030,
- 0x020e0490, 0x00000030,
- 0x020e074c, 0x00000030,
- 0x020e0494, 0x00000030,
- 0x020e04a0, 0x00000000,
- 0x020e04b4, 0x00000030,
- 0x020e04b8, 0x00000030,
- 0x020e076c, 0x00000030,
- 0x020e0750, 0x00020000,
- 0x020e04bc, 0x00000030,
- 0x020e04c0, 0x00000030,
- 0x020e04c4, 0x00000030,
- 0x020e04c8, 0x00000030,
- 0x020e04cc, 0x00000030,
- 0x020e04d0, 0x00000030,
- 0x020e04d4, 0x00000030,
- 0x020e04d8, 0x00000030,
- 0x020e0760, 0x00020000,
- 0x020e0764, 0x00000030,
- 0x020e0770, 0x00000030,
- 0x020e0778, 0x00000030,
- 0x020e077c, 0x00000030,
- 0x020e0780, 0x00000030,
- 0x020e0784, 0x00000030,
- 0x020e078c, 0x00000030,
- 0x020e0748, 0x00000030,
- 0x020e0470, 0x00000030,
- 0x020e0474, 0x00000030,
- 0x020e0478, 0x00000030,
- 0x020e047c, 0x00000030,
- 0x020e0480, 0x00000030,
- 0x020e0484, 0x00000030,
- 0x020e0488, 0x00000030,
- 0x020e048c, 0x00000030,
- 0x021b0800, 0xa1390003,
- 0x021b080c, 0x001F001F,
- 0x021b0810, 0x001F001F,
- 0x021b480c, 0x001F001F,
- 0x021b4810, 0x001F001F,
- 0x021b083c, 0x4220021F,
- 0x021b0840, 0x0207017E,
- 0x021b483c, 0x4201020C,
- 0x021b4840, 0x01660172,
- 0x021b0848, 0x4A4D4E4D,
- 0x021b4848, 0x4A4F5049,
- 0x021b0850, 0x3F3C3D31,
- 0x021b4850, 0x3238372B,
- 0x021b081c, 0x33333333,
- 0x021b0820, 0x33333333,
- 0x021b0824, 0x33333333,
- 0x021b0828, 0x33333333,
- 0x021b481c, 0x33333333,
- 0x021b4820, 0x33333333,
- 0x021b4824, 0x33333333,
- 0x021b4828, 0x33333333,
- 0x021b08b8, 0x00000800,
- 0x021b48b8, 0x00000800,
- 0x021b0004, 0x0002002D,
- 0x021b0008, 0x00333030,
- 0x021b000c, 0x3F435313,
- 0x021b0010, 0xB66E8B63,
- 0x021b0014, 0x01FF00DB,
- 0x021b0018, 0x00001740,
- 0x021b001c, 0x00008000,
- 0x021b002c, 0x000026d2,
- 0x021b0030, 0x00431023,
- 0x021b0040, 0x00000027,
- 0x021b0000, 0x831A0000,
- 0x021b001c, 0x04008032,
- 0x021b001c, 0x00008033,
- 0x021b001c, 0x00048031,
- 0x021b001c, 0x05208030,
- 0x021b001c, 0x04008040,
- 0x021b0020, 0x00005800,
- 0x021b0818, 0x00011117,
- 0x021b4818, 0x00011117,
- 0x021b0004, 0x0002556D,
- 0x021b0404, 0x00011006,
- 0x021b001c, 0x00000000,
-};
-
-static void ddr_init(int *table, int size)
-{
- int i;
-
- for (i = 0; i < size / 2 ; i++)
- writel(table[2 * i + 1], table[2 * i]);
-}
-
-static void spl_dram_init(void)
-{
- if (is_mx6dq())
- ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
- else if (is_mx6dqp())
- ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
- else if (is_mx6sdl())
- ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
-}
-
-void board_init_f(ulong dummy)
-{
- /* DDR initialization */
- spl_dram_init();
-
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- ccgr_init();
- gpr_init();
-
- /* iomux and setup of i2c */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
-#endif
diff --git a/board/freescale/mx6sabresd/spl.c b/board/freescale/mx6sabresd/spl.c
new file mode 100644
index 0000000..01d45ce
--- /dev/null
+++ b/board/freescale/mx6sabresd/spl.c
@@ -0,0 +1,501 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam at freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <spl.h>
+
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+
+#include <asm/imx-common/iomux-v3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_FSL_ESDHC
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | \
+ PAD_CTL_HYS)
+#define KEY_VOL_UP IMX_GPIO_NR(1, 4)
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
+};
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
+};
+
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+ IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+struct fsl_esdhc_cfg usdhc_cfg[3] = {
+ {USDHC2_BASE_ADDR},
+ {USDHC3_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
+};
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
+
+int board_mmc_get_env_dev(int devno)
+{
+ return devno - 1;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ break;
+ case USDHC3_BASE_ADDR:
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ case USDHC4_BASE_ADDR:
+ ret = 1; /* eMMC/uSDHC4 is always present */
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned reg = readl(&psrc->sbmr1) >> 11;
+ /*
+ * Upon reading BOOT_CFG register the following map is done:
+ * Bit 11 and 12 of BOOT_CFG register can determine the current
+ * mmc port
+ * 0x1 SD1
+ * 0x2 SD2
+ * 0x3 SD4
+ */
+
+ switch (reg & 0x3) {
+ case 0x1:
+ SETUP_IOMUX_PADS(usdhc2_pads);
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x2:
+ SETUP_IOMUX_PADS(usdhc3_pads);
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x3:
+ SETUP_IOMUX_PADS(usdhc4_pads);
+ usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ }
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+#endif /* CONFIG_FSL_ESDHC */
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ gpio_direction_input(KEY_VOL_UP);
+
+ /* Only enter in Falcon mode if KEY_VOL_UP is pressed */
+ return gpio_get_value(KEY_VOL_UP);
+}
+#endif
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFC000, &ccm->CCGR2);
+ writel(0x3FF00000, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ if (is_mx6dqp()) {
+ /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+ } else {
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+ }
+}
+
+static int mx6q_dcd_table[] = {
+ 0x020e0798, 0x000C0000,
+ 0x020e0758, 0x00000000,
+ 0x020e0588, 0x00000030,
+ 0x020e0594, 0x00000030,
+ 0x020e056c, 0x00000030,
+ 0x020e0578, 0x00000030,
+ 0x020e074c, 0x00000030,
+ 0x020e057c, 0x00000030,
+ 0x020e058c, 0x00000000,
+ 0x020e059c, 0x00000030,
+ 0x020e05a0, 0x00000030,
+ 0x020e078c, 0x00000030,
+ 0x020e0750, 0x00020000,
+ 0x020e05a8, 0x00000030,
+ 0x020e05b0, 0x00000030,
+ 0x020e0524, 0x00000030,
+ 0x020e051c, 0x00000030,
+ 0x020e0518, 0x00000030,
+ 0x020e050c, 0x00000030,
+ 0x020e05b8, 0x00000030,
+ 0x020e05c0, 0x00000030,
+ 0x020e0774, 0x00020000,
+ 0x020e0784, 0x00000030,
+ 0x020e0788, 0x00000030,
+ 0x020e0794, 0x00000030,
+ 0x020e079c, 0x00000030,
+ 0x020e07a0, 0x00000030,
+ 0x020e07a4, 0x00000030,
+ 0x020e07a8, 0x00000030,
+ 0x020e0748, 0x00000030,
+ 0x020e05ac, 0x00000030,
+ 0x020e05b4, 0x00000030,
+ 0x020e0528, 0x00000030,
+ 0x020e0520, 0x00000030,
+ 0x020e0514, 0x00000030,
+ 0x020e0510, 0x00000030,
+ 0x020e05bc, 0x00000030,
+ 0x020e05c4, 0x00000030,
+ 0x021b0800, 0xa1390003,
+ 0x021b080c, 0x001F001F,
+ 0x021b0810, 0x001F001F,
+ 0x021b480c, 0x001F001F,
+ 0x021b4810, 0x001F001F,
+ 0x021b083c, 0x43270338,
+ 0x021b0840, 0x03200314,
+ 0x021b483c, 0x431A032F,
+ 0x021b4840, 0x03200263,
+ 0x021b0848, 0x4B434748,
+ 0x021b4848, 0x4445404C,
+ 0x021b0850, 0x38444542,
+ 0x021b4850, 0x4935493A,
+ 0x021b081c, 0x33333333,
+ 0x021b0820, 0x33333333,
+ 0x021b0824, 0x33333333,
+ 0x021b0828, 0x33333333,
+ 0x021b481c, 0x33333333,
+ 0x021b4820, 0x33333333,
+ 0x021b4824, 0x33333333,
+ 0x021b4828, 0x33333333,
+ 0x021b08b8, 0x00000800,
+ 0x021b48b8, 0x00000800,
+ 0x021b0004, 0x00020036,
+ 0x021b0008, 0x09444040,
+ 0x021b000c, 0x555A7975,
+ 0x021b0010, 0xFF538F64,
+ 0x021b0014, 0x01FF00DB,
+ 0x021b0018, 0x00001740,
+ 0x021b001c, 0x00008000,
+ 0x021b002c, 0x000026d2,
+ 0x021b0030, 0x005A1023,
+ 0x021b0040, 0x00000027,
+ 0x021b0000, 0x831A0000,
+ 0x021b001c, 0x04088032,
+ 0x021b001c, 0x00008033,
+ 0x021b001c, 0x00048031,
+ 0x021b001c, 0x09408030,
+ 0x021b001c, 0x04008040,
+ 0x021b0020, 0x00005800,
+ 0x021b0818, 0x00011117,
+ 0x021b4818, 0x00011117,
+ 0x021b0004, 0x00025576,
+ 0x021b0404, 0x00011006,
+ 0x021b001c, 0x00000000,
+};
+
+static int mx6qp_dcd_table[] = {
+ 0x020e0798, 0x000c0000,
+ 0x020e0758, 0x00000000,
+ 0x020e0588, 0x00000030,
+ 0x020e0594, 0x00000030,
+ 0x020e056c, 0x00000030,
+ 0x020e0578, 0x00000030,
+ 0x020e074c, 0x00000030,
+ 0x020e057c, 0x00000030,
+ 0x020e058c, 0x00000000,
+ 0x020e059c, 0x00000030,
+ 0x020e05a0, 0x00000030,
+ 0x020e078c, 0x00000030,
+ 0x020e0750, 0x00020000,
+ 0x020e05a8, 0x00000030,
+ 0x020e05b0, 0x00000030,
+ 0x020e0524, 0x00000030,
+ 0x020e051c, 0x00000030,
+ 0x020e0518, 0x00000030,
+ 0x020e050c, 0x00000030,
+ 0x020e05b8, 0x00000030,
+ 0x020e05c0, 0x00000030,
+ 0x020e0774, 0x00020000,
+ 0x020e0784, 0x00000030,
+ 0x020e0788, 0x00000030,
+ 0x020e0794, 0x00000030,
+ 0x020e079c, 0x00000030,
+ 0x020e07a0, 0x00000030,
+ 0x020e07a4, 0x00000030,
+ 0x020e07a8, 0x00000030,
+ 0x020e0748, 0x00000030,
+ 0x020e05ac, 0x00000030,
+ 0x020e05b4, 0x00000030,
+ 0x020e0528, 0x00000030,
+ 0x020e0520, 0x00000030,
+ 0x020e0514, 0x00000030,
+ 0x020e0510, 0x00000030,
+ 0x020e05bc, 0x00000030,
+ 0x020e05c4, 0x00000030,
+ 0x021b0800, 0xa1390003,
+ 0x021b080c, 0x001b001e,
+ 0x021b0810, 0x002e0029,
+ 0x021b480c, 0x001b002a,
+ 0x021b4810, 0x0019002c,
+ 0x021b083c, 0x43240334,
+ 0x021b0840, 0x0324031a,
+ 0x021b483c, 0x43340344,
+ 0x021b4840, 0x03280276,
+ 0x021b0848, 0x44383A3E,
+ 0x021b4848, 0x3C3C3846,
+ 0x021b0850, 0x2e303230,
+ 0x021b4850, 0x38283E34,
+ 0x021b081c, 0x33333333,
+ 0x021b0820, 0x33333333,
+ 0x021b0824, 0x33333333,
+ 0x021b0828, 0x33333333,
+ 0x021b481c, 0x33333333,
+ 0x021b4820, 0x33333333,
+ 0x021b4824, 0x33333333,
+ 0x021b4828, 0x33333333,
+ 0x021b08c0, 0x24912249,
+ 0x021b48c0, 0x24914289,
+ 0x021b08b8, 0x00000800,
+ 0x021b48b8, 0x00000800,
+ 0x021b0004, 0x00020036,
+ 0x021b0008, 0x24444040,
+ 0x021b000c, 0x555A7955,
+ 0x021b0010, 0xFF320F64,
+ 0x021b0014, 0x01ff00db,
+ 0x021b0018, 0x00001740,
+ 0x021b001c, 0x00008000,
+ 0x021b002c, 0x000026d2,
+ 0x021b0030, 0x005A1023,
+ 0x021b0040, 0x00000027,
+ 0x021b0400, 0x14420000,
+ 0x021b0000, 0x831A0000,
+ 0x021b0890, 0x00400C58,
+ 0x00bb0008, 0x00000000,
+ 0x00bb000c, 0x2891E41A,
+ 0x00bb0038, 0x00000564,
+ 0x00bb0014, 0x00000040,
+ 0x00bb0028, 0x00000020,
+ 0x00bb002c, 0x00000020,
+ 0x021b001c, 0x04088032,
+ 0x021b001c, 0x00008033,
+ 0x021b001c, 0x00048031,
+ 0x021b001c, 0x09408030,
+ 0x021b001c, 0x04008040,
+ 0x021b0020, 0x00005800,
+ 0x021b0818, 0x00011117,
+ 0x021b4818, 0x00011117,
+ 0x021b0004, 0x00025576,
+ 0x021b0404, 0x00011006,
+ 0x021b001c, 0x00000000,
+};
+
+static int mx6dl_dcd_table[] = {
+ 0x020e0774, 0x000C0000,
+ 0x020e0754, 0x00000000,
+ 0x020e04ac, 0x00000030,
+ 0x020e04b0, 0x00000030,
+ 0x020e0464, 0x00000030,
+ 0x020e0490, 0x00000030,
+ 0x020e074c, 0x00000030,
+ 0x020e0494, 0x00000030,
+ 0x020e04a0, 0x00000000,
+ 0x020e04b4, 0x00000030,
+ 0x020e04b8, 0x00000030,
+ 0x020e076c, 0x00000030,
+ 0x020e0750, 0x00020000,
+ 0x020e04bc, 0x00000030,
+ 0x020e04c0, 0x00000030,
+ 0x020e04c4, 0x00000030,
+ 0x020e04c8, 0x00000030,
+ 0x020e04cc, 0x00000030,
+ 0x020e04d0, 0x00000030,
+ 0x020e04d4, 0x00000030,
+ 0x020e04d8, 0x00000030,
+ 0x020e0760, 0x00020000,
+ 0x020e0764, 0x00000030,
+ 0x020e0770, 0x00000030,
+ 0x020e0778, 0x00000030,
+ 0x020e077c, 0x00000030,
+ 0x020e0780, 0x00000030,
+ 0x020e0784, 0x00000030,
+ 0x020e078c, 0x00000030,
+ 0x020e0748, 0x00000030,
+ 0x020e0470, 0x00000030,
+ 0x020e0474, 0x00000030,
+ 0x020e0478, 0x00000030,
+ 0x020e047c, 0x00000030,
+ 0x020e0480, 0x00000030,
+ 0x020e0484, 0x00000030,
+ 0x020e0488, 0x00000030,
+ 0x020e048c, 0x00000030,
+ 0x021b0800, 0xa1390003,
+ 0x021b080c, 0x001F001F,
+ 0x021b0810, 0x001F001F,
+ 0x021b480c, 0x001F001F,
+ 0x021b4810, 0x001F001F,
+ 0x021b083c, 0x4220021F,
+ 0x021b0840, 0x0207017E,
+ 0x021b483c, 0x4201020C,
+ 0x021b4840, 0x01660172,
+ 0x021b0848, 0x4A4D4E4D,
+ 0x021b4848, 0x4A4F5049,
+ 0x021b0850, 0x3F3C3D31,
+ 0x021b4850, 0x3238372B,
+ 0x021b081c, 0x33333333,
+ 0x021b0820, 0x33333333,
+ 0x021b0824, 0x33333333,
+ 0x021b0828, 0x33333333,
+ 0x021b481c, 0x33333333,
+ 0x021b4820, 0x33333333,
+ 0x021b4824, 0x33333333,
+ 0x021b4828, 0x33333333,
+ 0x021b08b8, 0x00000800,
+ 0x021b48b8, 0x00000800,
+ 0x021b0004, 0x0002002D,
+ 0x021b0008, 0x00333030,
+ 0x021b000c, 0x3F435313,
+ 0x021b0010, 0xB66E8B63,
+ 0x021b0014, 0x01FF00DB,
+ 0x021b0018, 0x00001740,
+ 0x021b001c, 0x00008000,
+ 0x021b002c, 0x000026d2,
+ 0x021b0030, 0x00431023,
+ 0x021b0040, 0x00000027,
+ 0x021b0000, 0x831A0000,
+ 0x021b001c, 0x04008032,
+ 0x021b001c, 0x00008033,
+ 0x021b001c, 0x00048031,
+ 0x021b001c, 0x05208030,
+ 0x021b001c, 0x04008040,
+ 0x021b0020, 0x00005800,
+ 0x021b0818, 0x00011117,
+ 0x021b4818, 0x00011117,
+ 0x021b0004, 0x0002556D,
+ 0x021b0404, 0x00011006,
+ 0x021b001c, 0x00000000,
+};
+
+static void ddr_init(int *table, int size)
+{
+ int i;
+
+ for (i = 0; i < size / 2 ; i++)
+ writel(table[2 * i + 1], table[2 * i]);
+}
+
+static void spl_dram_init(void)
+{
+ if (is_mx6dq())
+ ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
+ else if (is_mx6dqp())
+ ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
+ else if (is_mx6sdl())
+ ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
+}
+
+void board_init_f(ulong dummy)
+{
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+ gpr_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index 2bfacb9..33e84f0 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
@@ -48,3 +49,5 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+# CONFIG_BLK is not set
+# CONFIG_DM_MMC_OPS is not set
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index a8c0e03..43a4aac 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -11,6 +11,10 @@
#ifdef CONFIG_SPL
#include "imx6_spl.h"
+# ifdef CONFIG_SPL_BUILD
+# undef CONFIG_DM_GPIO
+# undef CONFIG_DM_MMC
+# endif
#endif
#define CONFIG_MACH_TYPE 3980
@@ -34,7 +38,6 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
-#define CONFIG_SYS_FSL_USDHC_NUM 3
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
#endif
--
1.9.1
More information about the U-Boot
mailing list