[U-Boot] [PATCH v7 14/17] net: fec_mxc: Add 'phy-reset-gpios' support

Jagan Teki jagannadh.teki at gmail.com
Tue May 23 07:58:27 UTC 2017


From: Jagan Teki <jagan at openedev.com>

phy-reset-gpios property needed for adding mii_dev
reset bus operation, so the board code not take care
of phy_reset anymore if it use DM_ETH

Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Signed-off-by: Jagan Teki <jagan at openedev.com>
---
 drivers/net/fec_mxc.c | 64 +++++++++++++++++++++++++++++++++++++++++++++------
 drivers/net/fec_mxc.h |  8 +++++++
 include/netdev.h      |  5 ++++
 3 files changed, 70 insertions(+), 7 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 08bea8b..5e16f02 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -180,13 +180,27 @@ static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyaddr,
 static int fec_phy_read(struct mii_dev *bus, int phyaddr, int dev_addr,
 			int regaddr)
 {
-	return fec_mdio_read(bus->priv, phyaddr, regaddr);
+#ifdef CONFIG_DM_ETH
+	struct fec_priv *priv = dev_get_priv((struct udevice *)bus->priv);
+	struct ethernet_regs *eth = priv->eth;
+#else
+	struct ethernet_regs *eth = bus->priv;
+#endif
+
+	return fec_mdio_read(eth, phyaddr, regaddr);
 }
 
 static int fec_phy_write(struct mii_dev *bus, int phyaddr, int dev_addr,
 			 int regaddr, u16 data)
 {
-	return fec_mdio_write(bus->priv, phyaddr, regaddr, data);
+#ifdef CONFIG_DM_ETH
+	struct fec_priv *priv = dev_get_priv((struct udevice *)bus->priv);
+	struct ethernet_regs *eth = priv->eth;
+#else
+	struct ethernet_regs *eth = bus->priv;
+#endif
+
+	return fec_mdio_write(eth, phyaddr, regaddr, data);
 }
 
 #ifndef CONFIG_PHYLIB
@@ -985,9 +999,36 @@ static void fec_free_descs(struct fec_priv *fec)
 	free(fec->tbd_base);
 }
 
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO)
+static int fec_phy_reset(struct mii_dev *bus)
+{
+	struct fec_priv *priv = dev_get_priv((struct udevice *)bus->priv);
+
+	if (!dm_gpio_is_valid(&priv->reset_gpio))
+		return 0;
+
+	/* phy reset */
+	dm_gpio_set_value(&priv->reset_gpio, 0);
+	udelay(100);
+	dm_gpio_set_value(&priv->reset_gpio, 1);
+	udelay(100);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DM_ETH
+struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id)
+#else
 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
+#endif
 {
+#ifdef CONFIG_DM_ETH
+	struct fec_priv *priv = dev_get_priv(dev);
+	struct ethernet_regs *eth = priv->eth;
+#else
 	struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
+#endif
 	struct mii_dev *bus;
 	int ret;
 
@@ -998,7 +1039,14 @@ struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
 	}
 	bus->read = fec_phy_read;
 	bus->write = fec_phy_write;
+#ifdef CONFIG_DM_ETH
+	bus->priv = dev;
+# ifdef CONFIG_DM_GPIO
+	bus->reset = fec_phy_reset;
+# endif
+#else
 	bus->priv = eth;
+#endif
 	fec_set_dev_name(bus->name, dev_id);
 
 	ret = mdio_register(bus);
@@ -1223,7 +1271,7 @@ static int fecmxc_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	bus = fec_get_miibus((uint32_t)priv->eth, dev_id);
+	bus = fec_get_miibus(dev, dev_id);
 	if (!bus)
 		goto err_mii;
 
@@ -1292,10 +1340,12 @@ static int fecmxc_ofdata_to_platdata(struct udevice *dev)
 		return -EINVAL;
 	}
 
-	/* TODO
-	 * Need to get the reset-gpio and related properties from DT
-	 * and implemet the enet reset code on .probe call
-	 */
+#ifdef CONFIG_DM_GPIO
+	/* phy reset gpio */
+	gpio_request_by_name_nodev(gd->fdt_blob, dev_of_offset(dev),
+				   "phy-reset-gpios", 0,
+				   &priv->reset_gpio, GPIOD_IS_OUT);
+#endif
 
 	return 0;
 }
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 43a7d7b..74ede4a 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -17,6 +17,10 @@
 #ifndef __FEC_MXC_H
 #define __FEC_MXC_H
 
+#ifdef CONFIG_DM_GPIO
+# include <asm-generic/gpio.h>
+#endif
+
 /* Layout description of the FEC */
 struct ethernet_regs {
 	/* [10:2]addr = 00 */
@@ -254,6 +258,10 @@ struct fec_priv {
 
 #ifdef CONFIG_DM_ETH
 	u32 interface;
+
+# ifdef CONFIG_DM_GPIO
+	struct gpio_desc reset_gpio;
+# endif
 #endif
 };
 
diff --git a/include/netdev.h b/include/netdev.h
index 8eb8b46..e5668f4 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -133,7 +133,12 @@ static inline int pci_eth_init(bd_t *bis)
 	return num;
 }
 
+#ifdef CONFIG_DM_ETH
+struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id);
+#else
 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
+#endif
+
 #ifdef CONFIG_PHYLIB
 struct phy_device;
 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
-- 
1.9.1



More information about the U-Boot mailing list