[U-Boot] [PATCH 11/11] ARM: am437x-gp-evm-u-boot.dtsi: Enable nodes for USB device boot

[Lokesh Vutla]

On Tuesday 23 May 2017 05:25 PM, Vignesh R wrote:
> Enable USB nodes required to support RNDIS boot in SPL.
> 
> Signed-off-by: Vignesh R <vigneshr at ti.com>
> ---
>  arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm/dts/am437x-gp-evm-u-boot.dtsi b/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
> index 885a9a92dbd3..a689cd68a593 100644
> --- a/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
> +++ b/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
> @@ -36,3 +36,23 @@
>  &phy_sel {
>  	u-boot,dm-pre-reloc;
>  };

Can you mark all the below node as "u-boot,dm-spl" instead of
u-boot,dm-pre-reloc?

Thanks and regards,
Lokesh

> +
> +&am43xx_control_usb2phy1 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&ocp2scp0 {
> +	u-boot,dm-pre-reloc;
> +
> +	phy at 483a8000 {
> +		u-boot,dm-pre-reloc;
> +	};
> +};
> +
> +&dwc3_1 {
> +	u-boot,dm-pre-reloc;
> +
> +	usb at 48390000 {
> +		u-boot,dm-pre-reloc;
> +	};
> +};
>