[U-Boot] [PATCHv4 3/3] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards

[Andreas Färber]

Am 08.05.2017 um 18:36 schrieb Jorge Ramirez-Ortiz:
> This port adds support for:
>         1) Serial
>         2) eMMC
>         3) USB
> 
> It has been tested with ARM TRUSTED FIRMWARE running u-boot as the
> BL33 executable [see board's README]
> 
> eMMC has been tested for reading and booting the loader[1] and linux
> kernels as well as saving the u-boot environment.
> 
> USB has been tested with ASIX networking adapter and SanDisk 7.4GB
> drive.
> 
> PSCI has been tested via the reset call.
> 
> The firwmare upgrade process has been tested via TFTP and USB FAT
> filesystem containing the fastboot.bin image in one of the partitions.
> 
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> ---
>  arch/arm/Kconfig                                   |  12 ++
>  arch/arm/dts/hi3798cv200.dtsi                      |   3 +
>  arch/arm/dts/poplar-uboot.dtsi                     |  24 +++
>  arch/arm/include/asm/arch-hi3798cv200/dwmmc.h      |  13 ++
>  .../arm/include/asm/arch-hi3798cv200/hi3798cv200.h |  50 +++++
>  board/hisilicon/poplar/Kconfig                     |  15 ++
>  board/hisilicon/poplar/MAINTAINERS                 |   6 +
>  board/hisilicon/poplar/Makefile                    |   7 +
>  board/hisilicon/poplar/README                      | 232 +++++++++++++++++++++
>  board/hisilicon/poplar/poplar.c                    | 155 ++++++++++++++
>  configs/poplar_defconfig                           |  26 +++
>  include/configs/poplar.h                           |  86 ++++++++
>  12 files changed, 629 insertions(+)
>  create mode 100644 arch/arm/dts/poplar-uboot.dtsi
>  create mode 100644 arch/arm/include/asm/arch-hi3798cv200/dwmmc.h
>  create mode 100644 arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
>  create mode 100644 board/hisilicon/poplar/Kconfig
>  create mode 100644 board/hisilicon/poplar/MAINTAINERS
>  create mode 100644 board/hisilicon/poplar/Makefile
>  create mode 100644 board/hisilicon/poplar/README
>  create mode 100644 board/hisilicon/poplar/poplar.c
>  create mode 100644 configs/poplar_defconfig
>  create mode 100644 include/configs/poplar.h

Wende an: ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards
.git/rebase-apply/patch:237: trailing whitespace.
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
.git/rebase-apply/patch:66: new blank line at EOF.
+
.git/rebase-apply/patch:96: new blank line at EOF.
+
.git/rebase-apply/patch:616: new blank line at EOF.
+
.git/rebase-apply/patch:648: new blank line at EOF.
+
warning: 5 Zeilen fügen Whitespace-Fehler hinzu.

Please address the whitespace warnings.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)