[U-Boot] [PATCH 10/38] samsung: mmc: Drop s3c_sdi driver
Jaehoon Chung
jh80.chung at samsung.com
Fri May 26 02:20:48 UTC 2017
On 05/17/2017 11:22 PM, Simon Glass wrote:
> This is no-longer used in U-Boot. Drop it.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
> ---
>
> drivers/mmc/Makefile | 1 -
> drivers/mmc/s3c_sdi.c | 323 -------------------------------------------
> scripts/config_whitelist.txt | 1 -
> 3 files changed, 325 deletions(-)
> delete mode 100644 drivers/mmc/s3c_sdi.c
>
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index a078649899..2d781c38a6 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -40,7 +40,6 @@ obj-$(CONFIG_MMC_MXS) += mxsmmc.o
> obj-$(CONFIG_MMC_PCI) += pci_mmc.o
> obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
> obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
> -obj-$(CONFIG_S3C_SDI) += s3c_sdi.o
> obj-$(CONFIG_MMC_SANDBOX) += sandbox_mmc.o
> obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
> obj-$(CONFIG_SH_SDHI) += sh_sdhi.o
> diff --git a/drivers/mmc/s3c_sdi.c b/drivers/mmc/s3c_sdi.c
> deleted file mode 100644
> index faf7b83a14..0000000000
> --- a/drivers/mmc/s3c_sdi.c
> +++ /dev/null
> @@ -1,323 +0,0 @@
> -/*
> - * S3C24xx SD/MMC driver
> - *
> - * Based on OpenMoko S3C24xx driver by Harald Welte <laforge at openmoko.org>
> - *
> - * Copyright (C) 2014 Marek Vasut <marex at denx.de>
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#include <common.h>
> -#include <malloc.h>
> -#include <mmc.h>
> -#include <errno.h>
> -#include <asm/arch/s3c24x0_cpu.h>
> -#include <asm/io.h>
> -#include <asm/unaligned.h>
> -
> -#define S3C2440_SDICON_SDRESET (1 << 8)
> -#define S3C2410_SDICON_FIFORESET (1 << 1)
> -#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
> -
> -#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
> -#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
> -#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
> -#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
> -#define S3C2410_SDICMDCON_INDEX 0x3f
> -
> -#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
> -#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
> -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
> -#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
> -
> -#define S3C2440_SDIDCON_DS_WORD (2 << 22)
> -#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
> -#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
> -#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
> -#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
> -#define S3C2440_SDIDCON_DATSTART (1 << 14)
> -#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
> -#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
> -#define S3C2410_SDIDCON_BLKNUM 0x7ff
> -
> -#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
> -#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
> -#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
> -#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
> -#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
> -
> -#define S3C2410_SDIFSTA_TFHALF (1 << 11)
> -#define S3C2410_SDIFSTA_COUNTMASK 0x7f
> -
> -/*
> - * WARNING: We only support one SD IP block.
> - * NOTE: It's not likely there will ever exist an S3C24xx with two,
> - * at least not in this universe all right.
> - */
> -static int wide_bus;
> -
> -static int
> -s3cmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
> -{
> - struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
> - uint32_t sdiccon, sdicsta, sdidcon, sdidsta, sdidat, sdifsta;
> - uint32_t sdicsta_wait_bit = S3C2410_SDICMDSTAT_CMDSENT;
> - unsigned int timeout = 100000;
> - int ret = 0, xfer_len, data_offset = 0;
> - const uint32_t sdidsta_err_mask = S3C2410_SDIDSTA_FIFOFAIL |
> - S3C2410_SDIDSTA_CRCFAIL | S3C2410_SDIDSTA_RXCRCFAIL |
> - S3C2410_SDIDSTA_DATATIMEOUT;
> -
> -
> - writel(0xffffffff, &sdi_regs->sdicsta);
> - writel(0xffffffff, &sdi_regs->sdidsta);
> - writel(0xffffffff, &sdi_regs->sdifsta);
> -
> - /* Set up data transfer (if applicable). */
> - if (data) {
> - writel(data->blocksize, &sdi_regs->sdibsize);
> -
> - sdidcon = data->blocks & S3C2410_SDIDCON_BLKNUM;
> - sdidcon |= S3C2410_SDIDCON_BLOCKMODE;
> -#if defined(CONFIG_S3C2440)
> - sdidcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART;
> -#endif
> - if (wide_bus)
> - sdidcon |= S3C2410_SDIDCON_WIDEBUS;
> -
> - if (data->flags & MMC_DATA_READ) {
> - sdidcon |= S3C2410_SDIDCON_RXAFTERCMD;
> - sdidcon |= S3C2410_SDIDCON_XFER_RXSTART;
> - } else {
> - sdidcon |= S3C2410_SDIDCON_TXAFTERRESP;
> - sdidcon |= S3C2410_SDIDCON_XFER_TXSTART;
> - }
> -
> - writel(sdidcon, &sdi_regs->sdidcon);
> - }
> -
> - /* Write CMD arg. */
> - writel(cmd->cmdarg, &sdi_regs->sdicarg);
> -
> - /* Write CMD index. */
> - sdiccon = cmd->cmdidx & S3C2410_SDICMDCON_INDEX;
> - sdiccon |= S3C2410_SDICMDCON_SENDERHOST;
> - sdiccon |= S3C2410_SDICMDCON_CMDSTART;
> -
> - /* Command with short response. */
> - if (cmd->resp_type & MMC_RSP_PRESENT) {
> - sdiccon |= S3C2410_SDICMDCON_WAITRSP;
> - sdicsta_wait_bit = S3C2410_SDICMDSTAT_RSPFIN;
> - }
> -
> - /* Command with long response. */
> - if (cmd->resp_type & MMC_RSP_136)
> - sdiccon |= S3C2410_SDICMDCON_LONGRSP;
> -
> - /* Start the command. */
> - writel(sdiccon, &sdi_regs->sdiccon);
> -
> - /* Wait for the command to complete or for response. */
> - for (timeout = 100000; timeout; timeout--) {
> - sdicsta = readl(&sdi_regs->sdicsta);
> - if (sdicsta & sdicsta_wait_bit)
> - break;
> -
> - if (sdicsta & S3C2410_SDICMDSTAT_CMDTIMEOUT)
> - timeout = 1;
> - }
> -
> - /* Clean the status bits. */
> - setbits_le32(&sdi_regs->sdicsta, 0xf << 9);
> -
> - if (!timeout) {
> - puts("S3C SDI: Command timed out!\n");
> - ret = -ETIMEDOUT;
> - goto error;
> - }
> -
> - /* Read out the response. */
> - if (cmd->resp_type & MMC_RSP_136) {
> - cmd->response[0] = readl(&sdi_regs->sdirsp0);
> - cmd->response[1] = readl(&sdi_regs->sdirsp1);
> - cmd->response[2] = readl(&sdi_regs->sdirsp2);
> - cmd->response[3] = readl(&sdi_regs->sdirsp3);
> - } else {
> - cmd->response[0] = readl(&sdi_regs->sdirsp0);
> - }
> -
> - /* If there are no data, we're done. */
> - if (!data)
> - return 0;
> -
> - xfer_len = data->blocksize * data->blocks;
> -
> - while (xfer_len > 0) {
> - sdidsta = readl(&sdi_regs->sdidsta);
> - sdifsta = readl(&sdi_regs->sdifsta);
> -
> - if (sdidsta & sdidsta_err_mask) {
> - printf("S3C SDI: Data error (sdta=0x%08x)\n", sdidsta);
> - ret = -EIO;
> - goto error;
> - }
> -
> - if (data->flags & MMC_DATA_READ) {
> - if ((sdifsta & S3C2410_SDIFSTA_COUNTMASK) < 4)
> - continue;
> - sdidat = readl(&sdi_regs->sdidat);
> - put_unaligned_le32(sdidat, data->dest + data_offset);
> - } else { /* Write */
> - /* TX FIFO half full. */
> - if (!(sdifsta & S3C2410_SDIFSTA_TFHALF))
> - continue;
> -
> - /* TX FIFO is below 32b full, write. */
> - sdidat = get_unaligned_le32(data->src + data_offset);
> - writel(sdidat, &sdi_regs->sdidat);
> - }
> - data_offset += 4;
> - xfer_len -= 4;
> - }
> -
> - /* Wait for the command to complete or for response. */
> - for (timeout = 100000; timeout; timeout--) {
> - sdidsta = readl(&sdi_regs->sdidsta);
> - if (sdidsta & S3C2410_SDIDSTA_XFERFINISH)
> - break;
> -
> - if (sdidsta & S3C2410_SDIDSTA_DATATIMEOUT)
> - timeout = 1;
> - }
> -
> - /* Clear status bits. */
> - writel(0x6f8, &sdi_regs->sdidsta);
> -
> - if (!timeout) {
> - puts("S3C SDI: Command timed out!\n");
> - ret = -ETIMEDOUT;
> - goto error;
> - }
> -
> - writel(0, &sdi_regs->sdidcon);
> -
> - return 0;
> -error:
> - return ret;
> -}
> -
> -static int s3cmmc_set_ios(struct mmc *mmc)
> -{
> - struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
> - uint32_t divider = 0;
> -
> - wide_bus = (mmc->bus_width == 4);
> -
> - if (!mmc->clock)
> - return 0;
> -
> - divider = DIV_ROUND_UP(get_PCLK(), mmc->clock);
> - if (divider)
> - divider--;
> -
> - writel(divider, &sdi_regs->sdipre);
> - mdelay(125);
> -
> - return 0;
> -}
> -
> -static int s3cmmc_init(struct mmc *mmc)
> -{
> - struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
> - struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
> -
> - /* Start the clock. */
> - setbits_le32(&clk_power->clkcon, 1 << 9);
> -
> -#if defined(CONFIG_S3C2440)
> - writel(S3C2440_SDICON_SDRESET, &sdi_regs->sdicon);
> - mdelay(10);
> - writel(0x7fffff, &sdi_regs->sdidtimer);
> -#else
> - writel(0xffff, &sdi_regs->sdidtimer);
> -#endif
> - writel(MMC_MAX_BLOCK_LEN, &sdi_regs->sdibsize);
> - writel(0x0, &sdi_regs->sdiimsk);
> -
> - writel(S3C2410_SDICON_FIFORESET | S3C2410_SDICON_CLOCKTYPE,
> - &sdi_regs->sdicon);
> -
> - mdelay(125);
> -
> - return 0;
> -}
> -
> -struct s3cmmc_priv {
> - struct mmc_config cfg;
> - int (*getcd)(struct mmc *);
> - int (*getwp)(struct mmc *);
> -};
> -
> -static int s3cmmc_getcd(struct mmc *mmc)
> -{
> - struct s3cmmc_priv *priv = mmc->priv;
> - if (priv->getcd)
> - return priv->getcd(mmc);
> - else
> - return 0;
> -}
> -
> -static int s3cmmc_getwp(struct mmc *mmc)
> -{
> - struct s3cmmc_priv *priv = mmc->priv;
> - if (priv->getwp)
> - return priv->getwp(mmc);
> - else
> - return 0;
> -}
> -
> -static const struct mmc_ops s3cmmc_ops = {
> - .send_cmd = s3cmmc_send_cmd,
> - .set_ios = s3cmmc_set_ios,
> - .init = s3cmmc_init,
> - .getcd = s3cmmc_getcd,
> - .getwp = s3cmmc_getwp,
> -};
> -
> -int s3cmmc_initialize(bd_t *bis, int (*getcd)(struct mmc *),
> - int (*getwp)(struct mmc *))
> -{
> - struct s3cmmc_priv *priv;
> - struct mmc *mmc;
> - struct mmc_config *cfg;
> -
> - priv = calloc(1, sizeof(*priv));
> - if (!priv)
> - return -ENOMEM;
> - cfg = &priv->cfg;
> -
> - cfg->name = "S3C MMC";
> - cfg->ops = &s3cmmc_ops;
> - cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
> - cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_HS;
> - cfg->f_min = 400000;
> - cfg->f_max = get_PCLK() / 2;
> - cfg->b_max = 0x80;
> -
> -#if defined(CONFIG_S3C2410)
> - /*
> - * S3C2410 has some bug that prevents reliable
> - * operation at higher speed
> - */
> - cfg->f_max /= 2;
> -#endif
> -
> - mmc = mmc_create(cfg, priv);
> - if (!mmc) {
> - free(priv);
> - return -ENOMEM;
> - }
> -
> - return 0;
> -}
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index fa9c3fc8cb..dd7b328d8f 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -2365,7 +2365,6 @@ CONFIG_S3C2400
> CONFIG_S3C2410
> CONFIG_S3C2410_NAND_BBT
> CONFIG_S3C2410_NAND_HWECC
> -CONFIG_S3C2440
> CONFIG_S3C24X0
> CONFIG_S3C24XX_TACLS
> CONFIG_S3C24XX_TWRPH0
>
More information about the U-Boot
mailing list