[U-Boot] [PATCH] arm: ls1021atwr: Add distro boot support

[Alison Wang]

This patch includes common config_distro_defaults.h and
config_distro_bootcmd.h for u-boot enviroments to support distro boot
which automatically scan boot.scr from storage devices(e.g.
SD/USB/SATA/SCSI disk) and execute autoboot script on LS1021ATWR board.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
Signed-off-by: Alison Wang <alison.wang at nxp.com>
---
 configs/ls1021atwr_nor_defconfig         |  1 +
 configs/ls1021atwr_sdcard_ifc_defconfig  |  1 +
 configs/ls1021atwr_sdcard_qspi_defconfig |  1 +
 include/configs/ls1021atwr.h             | 81 ++++++++++++++++++++++++++++++--
 4 files changed, 81 insertions(+), 3 deletions(-)

diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index c56533a..dcacdac 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -44,3 +44,4 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_VIDEO_FSL_DCU_FB=y
 # CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index 9809c60..616bec6 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -56,3 +56,4 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_VIDEO_FSL_DCU_FB=y
 # CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index 5ccfc96..293e735 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -63,3 +63,4 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_VIDEO_FSL_DCU_FB=y
 # CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 60c3d5d..74ee74d 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -354,7 +354,6 @@
 #endif
 
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
@@ -366,19 +365,95 @@
 
 #define CONFIG_FSL_DEVICE_DISABLE
 
+#include <config_distro_defaults.h>
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"
+	"fdt_high=0xffffffff\0"		\
+	"fdt_addr=0x64f00000\0"		\
+	"kernel_addr=0x65000000\0"	\
+	"scriptaddr=0x80000000\0"	\
+	"fdtheader_addr_r=0x80100000\0"	\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"	\
+	"fdt_addr_r=0x90000000\0"	\
+	"ramdisk_addr_r=0xa0000000\0"	\
+	"load_addr=0xa0000000\0"	\
+	"kernel_size=0x2800000\0"	\
+	BOOTENV				\
+	"boot_scripts=ls1021atwr_boot.scr\0"	\
+		"scan_dev_for_boot_part="	\
+			"part list ${devtype} ${devnum} devplist; "	\
+			"env exists devplist || setenv devplist 1; "	\
+			"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "				\
+				"${devnum}:${distro_bootpart} "		\
+				"bootfstype; then "			\
+				"run scan_dev_for_boot; "		\
+			"fi; "			\
+		"done\0"			\
+	"installer=load mmc 0:2 $load_addr "	\
+		"/flex_installer_arm32.itb; "		\
+		"bootm $load_addr#ls1021atwr\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "		\
+		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"
+	"fdt_high=0xffffffff\0"		\
+	"fdt_addr=0x64f00000\0"		\
+	"kernel_addr=0x65000000\0"	\
+	"scriptaddr=0x80000000\0"	\
+	"fdtheader_addr_r=0x80100000\0"	\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"	\
+	"fdt_addr_r=0x90000000\0"	\
+	"ramdisk_addr_r=0xa0000000\0"	\
+	"load_addr=0xa0000000\0"	\
+	"kernel_size=0x2800000\0"	\
+	BOOTENV				\
+	"boot_scripts=ls1021atwr_boot.scr\0"	\
+		"scan_dev_for_boot_part="	\
+			"part list ${devtype} ${devnum} devplist; "	\
+			"env exists devplist || setenv devplist 1; "	\
+			"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "				\
+				"${devnum}:${distro_bootpart} "		\
+				"bootfstype; then "			\
+				"run scan_dev_for_boot; "		\
+			"fi; "			\
+		"done\0"			\
+	"installer=load mmc 0:2 $load_addr "	\
+		"/flex_installer_arm32.itb; "		\
+		"bootm $load_addr#ls1021atwr\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "		\
+		"$kernel_size && bootm $load_addr#$board\0"
 #endif
 
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run nor_bootcmd"
+#endif
+
+#define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0"
+
 /*
  * Miscellaneous configurable options
  */
-- 
2.1.0.27.g96db324